Teichtip 61460 Stainless Steel Waterfall User Manual
- June 5, 2024
- Teichtip
Table of Contents
Teichtip 61460 Stainless Steel Waterfall
The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual, nor in the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely. If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to: [email protected]
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop: https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the
following address.
Attention! To allow for a trouble-free complaint or return, it is
important to contact our customer Serviceteam before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-Mail: [email protected]
Phone: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients take some basic safety precautions when using this device. Please read the operation instructionscarefully and make sure you have understood its content. Keep these operation instructions safe.
Structure
With LED
Caution! This is only a brief description of how to set up the waterfall.
Before installation, please ensure to have ready a suitable water pump, a
water pipe, and other parts required for connecting. For cleaning,
we recommend a microfibre cloth to protect the stainless steel from being
scratched.
Assembly notes
- Place the waterfall on the spot that you have chosen.
- Make sure that the spot has a solid surface and enough space for the pump and hose connection.
- Connect the waterfall to the pump.
- If the waterfall has an LED light bar, this must be checked for its correct and firm seat. Install the power cable out of the water and connect it to the transformer.
- Align the waterfall as you wish it to be aligned, and fix it.
- Check the water circuit for leaks, that should be sealed with hose clamps and sealing tape.
- Switch on the pump and, if present, the LED light and put the waterfall into operation.
Special features of waterfalls equipped with LED light bar
- The LED light bar is safely and reliably supplied with a 12 V AC transformer.
- The LED light can be controlled with a remote control, that can switch to 17 different illumination patterns.
- The waterfall and LED light bar are not pre-assembled at reception; however, they can easily be connected to each other.
Safety instructions
Caution! Disobeying the following safety instructions might result in serious injuries or damages.
- A correct and complete assembly and a correct use are of special importance for they minimize the risk of injuries.
- Note that two persons are required for a successful assembly.
- Contact the vendor or qualified personnel if there is any technical problem. Do not try to solve technical problems without having the necessary knowledge.
- For cleaning the product, only use soft, dry and clean cloths. Do not use organic solvents, paints or chemically impregnated textiles.
- Always switch off the waterfall before cleaning it or when it is not used.
- To prevent any spots and corrosion from forming on the stainless-steel surface, a regular cleaning and maintenance of the waterfall is required.
- Make sure that no deposits such as salt, dirt, etc. can accumulate on the waterfall and in interstices.
- It is recommended that the waterfall be checked and maintained once a year.
- Protect the waterfall, pump and hose connection from frost. Remove all parts early enough and keep them in a frost-proof place
- Warning! When using the waterfall in a swimming pool or swimming pond, make sure that the power supply does not come into contact with the water. The pump must not be operated with people present in the water.
Technical specifications
Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE,
2012/19/EU) were implemented in the law related to electrical and electronic
equipment and appliances. All WilTec electric devices that fall under the WEEE
regulations are labelled with the crossed-out wheeled waste bin logo. This
logo indicates that this electric equipment must not be disposed with the
domestic waste. The company WilTec Technik GmbH has been registered in the
German registry EAR under the WEEE-registration number DE45283704. Disposal of
used electrical and electronic appliances (intended for use in the countries
of the European Union and other European countries with a separate collection
system for these appliances). The logo on the article or on its packaging
points out that this article must not be treated as normal household waste but
must be disposed to a recycling collection point for electronic and electrical
waste equipment. By contributing to the correct disposal of this article you
protect the environment and the health of your fellow men. Environment and
health are threatened by inappropriate disposal.
Material recycling helps reduce the consumption of raw materials. Additional
information on recycling this article can be provided by your local community,
municipal waste disposal facilities, or the store where you purchased the
article.