iScale SMSC2104-G-001 Smart Meter User Manual

iScale SMSC2104-G-001 Smart Meter

Product Information

Specifications

• Model: SMSC2104-G-001
• Manufacturer: Smart Meter, LLC
• Version: 1.0
• Contact Information: 1-844-445-8267, support@iglucose.com
• Designed for: Smart Meter

Product Usage Instructions

Initial Set-Up

General Instructions:
The iScale (Model: SMSC2104-G-001) features SENSE ON technology, eliminating the need to manually turn it on or off before use. Simply step onto the iScale for measurement.

Insert Batteries and Pair-Up
To start using your iScale, insert the four AA-size batteries provided into the battery compartment. Ensure proper polarity (+/-) alignment when inserting the batteries. The iScale will automatically pair up with the display.

Select Measurement Unit
You can toggle between different measurement units by pressing the Measurement Unit Button on the device. Choose from Kilogram, Stone, or Pound as per your preference.

How to Check and Re-install the SIM Card
If your iScale features a SIM card, follow the instructions in the manual to locate and check the status of the SIM card. If needed, carefully re-install the SIM card according to the provided guidelines.

Start Measuring

Daily Measurement:
Stand on the iScale to start measuring your weight. The device will display accurate weight measurements promptly.

Troubleshooting

Error Prompt:
In case of any error prompts during measurement, refer to the troubleshooting section in the manual for possible solutions. Contact customer support if issues persist.

FAQ

• Q: What age group is the iScale suitable for?
  A: The iScale is designed for use by adults and children aged 10-17 years old.

• Q: Can the iScale be used on wet surfaces?
  A: It is recommended not to use the iScale on slippery or wet surfaces to ensure safety and accurate measurements.

• Q: How does the iScale turn on for measurement?
  A: The iScale features SENSE ON technology, allowing it to automatically activate when stepped on for measurement without the need for manual power switches.

SYMBOL MEANINGS

The symbols below may be in the user manual, labelling or other components. They are the standard requirement of use.

CAUTION

• The iScale offers you a way to manage your health. Please be aware that this device is designed for self-monitoring in adults and children between the ages of 10-17. Any information provided by this device is in no way meant to cure or prevent any disease or illness from happening.
• The iScale is equipped with data transmission functionality. It may emit electromagnetic energy to perform its intended function. Nearby portable and mobile RF communications equipment can affect the performance of the device. Portable and mobile RF communications equipment can affect the measuring accuracy of the iScale.
• Kindly note that the use of accessories, transducers or cables other than those specified, except transducers and cables sold by the manufacturer as replacement parts for internal components, may result in increased
• EMISSIONS or decreased IMMUNITY of the device.
• Be aware that misuse of electrical equipment can cause electric shock, burns, fire and other hazards. Please do not use the device in a flammable gas environment.
• Warning that the iScale should not be used adjacent to or stacked with other equipment.
• The glass surface of the iScale is the type BF Applied part.
• The device does not need to be calibrated for the first 5 years of its lifetime.
• Do not touch the output of batteries when using the iScale.
• You can use this device to take your measurements, no third-party operator is required.
• Please use the device under the conditions which are outlined in the user manual. Otherwise, the performance and lifetime of the device may be impacted and reduced.
• Store your device in a clean and dry place. Never store any heavy objects on it.
• Dispose of accessories, detachable parts, and the device according to the local guidelines.

SAFETY INFORMATION

INDICATIONS FOR USE
The iScale is intended for adults and children (10-17 years old) to measure weight at home.

Your iScale and Its Environment
To ensure your safety as well as the service life of your iScale, DO NOT use the iScale:

• On a slippery floor such as tile floor,
• Immediately after bathing or with wet feet,
• Near a cell phone or microwave oven.

Avoid storage in the following locations:

• Where there is water.
• Where the device may be exposed to extreme temperatures, humidity, moisture, direct sunlight, dust, or salt air.
• Where there is a risk of shock or falling.
• Where you store chemicals or where there are corrosive gases.
• Where in reach of infants or children under the age of 10.

Efficient Use of Your iScale
To ensure the accuracy of measurement, please follow the below instructions when you start measurement.

• Place the iScale on a flat, hard surface. Soft surfaces such as carpets may affect the performance of the iScale.
• Weigh yourself at least two hours after getting up or eating.
• Avoid measurement immediately after strenuous exercise, sauna or bath, drinking, and eating.
• Always start measurement in the same time slot and on the same iScale located on the same flat, hard surface.
• This device is not intended for use in an oxygen-rich environment.
• Any information provided by this iScale is in no way meant to cure or prevent any disease or illness from happening. If in doubt, contact your physician.
• The device is designed for use in a home healthcare environment.

OVERVIEW

Device Components

What’s Included

1. iScale (SMSC2104-G-001)
2. Four AA-size Batteries (1.5V per each)
3. User Manual
4. Quick Start Guide

LCD Display

INITIAL SET-UP

General Instructions
iScale (SMSC2104-G-001) applies SENSE ON technology. It’s not necessary to turn the iScale on or off before measuring, just stand on the iScale for measurement.

Insert Batteries

• Open the battery door in the back of the iScale.
• Insert the batteries (4 x 1.5V AA) according to the polarity indications (+/-) marked inside the battery compartment.
  • The LCD will light up.

CAUTION

• When the symbol “ ” blinks, the device will power off. Replace with a new set of batteries. Please replace all four batteries at the same time. Do NOT mix the old batteries with the new ones.
• Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.
• Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries and scrapped devices.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.
• If you do not intend to use this unit for a prolonged time, it is recommended to remove the batteries before storing them.
• The lifetime of the batteries is one year with use up to three times a day.

Select Measurement Unit
The unit switch button is on the back of the iScale. The default measurement unit is “ lb”. You may press the button to choose between “pound”, “kilogram” and “stone”. Place the iScale on the ground and it will turn off in 10 seconds.

How to Check and Re-install the SIM Card
Flip your iScale over to find the SIM card compartment door inside the battery compartment labelled “SIM”. Open the SIM card door with a screwdriver and then you can check and re-install the SIM card.

• DO NOT open it unless it is necessary!
• DO NOT replace it with another SIM card!

DAILY MEASUREMENT

• With patented SENSE ON technology, the iScale will automatically switch on as you step on the platform barefooted.
• Stand still and keep full contact with the iScale, the weight data on the LCD will blink twice, and then the weight is locked. Then the iScale automatically connects to the cellular network.
• If the iScale connection fails,  will be displayed.
• After connecting to the cellular network, the weight data will be transmitted. When data is successfully transmitted, “OK” will be displayed and “ ” appears.
• If the data transfer fails, “ ” will be displayed.

TROUBLESHOOTING

Error Prompt

When Measuring

Problem

| Root Cause|

Solution

---|---|---
No display on the LCD when the device powers on| Batteries not yet installed| Install the batteries.

(Please refer to the Insert the Batteries section of this manual)

Worn batteries| Replace all four batteries at the same time. Please purchase the authorized batteries for replacement
The device powers o automatically| Worn batteries| Replace all four batteries at the same time. Please purchase the authorized batteries for replacement

About the Accuracy of This Product

• This product passes strict inspection before delivery and therefore its accuracy is guaranteed by the manufacturer. Please refer to the table for the descriptions of accuracy.
• This product is specially designed for weight measurement.
• It should NOT be used by anyone during the process of transaction for verification of goods’ weight.

SPECIFICATIONS

lb
Division| 0.1 kg / 0.2 lb
Accuracy| 110.2 lb：109.6 lb~110.6 lb; 220.4 lb: 219.6 lb~221.0 lb;

330.6 lb：329.8 lb~331.4 lb; 440.8 lb：439.8 lb~442.0 lb

Working Environment| Temperature: 41°F to 104°F Relative Humidity: ≤90% RH Atmospheric pressure: 860 hPa to 1060 hPa
Storage Environment| Temperature: -4°F to 140°F        Relative Humidity: ≤90% RH Atmospheric pressure: 500 hPa to 1060 hPa
Power Source| 6V (Four AA-size Batteries)
Auto-ON| SENSE ON Technology
Auto-OFF| About 10 seconds while showing 0.0
Accessories| 1.   Four AA-size Batteries

2.  User Manual

3.  Quick Start Guide

Mode of Operation| Continuous Operation
Protection Against Ingress of Water| IP21 (The first number 2: Protected against solid foreign objects of 12.5 mm Ф and greater. The second number 1: Protection against vertically falling water drops.)
Degree of protection| Type BF applied part

MAINTENANCE

When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts:

• DO clean the device after use.
• DO use a dry soft cloth to wipe off the dust.
• DO use a wet soft cloth, dipped into water and wrung out, to wipe off the dirt. Then use a soft cloth to dry the device.
• DON’T wash the device with water or immerse it in water.
• DON’T use propellant, abrasive or other chemicals to wipe off the dirt in avoidance of discolouration or malfunction.
• DON’T attempt to repair the device or replace components (e.g., transducers, LCD, etc.) by yourself. If you suspect an incorrect operation, contact customer support for further assistance. At the request of authorized service personnel, circuit diagrams, part lists, descriptions, and calibration procedures will be made available by the manufacturer or distributor.
• DON’T disassemble this device. If you have problems, contact customer support (Please refer to the section of “Warranty” for customer support information).
• DON’T service or provide maintenance while in use.

Warranty

• The manufacturer guarantees its products’ materials and assembly in normal use will remain free of defects for FIVE years from the date of purchase.
• This warranty does NOT cover damages caused by misuse or abuse, including but not limited to Failure caused by unauthorized repairs or modifications;
• Damage caused by shock or drop during transportation;
• Failure caused by improper operation inconsistent with the instructions stated in this user manual; Malfunction or damage from failure to provide the recommended maintenance;
• Damage caused by improper use of power supply.

FCC REGULATIONS

FCC User Guide Information

Radio Frequency Interface Requirements – FCC

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected;
• Consult the dealer or an experienced radio / TV technician for help.

Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC SAR statement

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• The end user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).
• These requirements set a SAR limit of 4.0 W/kg averaged over one gram of tissue.
• The highest SAR value reported under this standard during product certification for use when properly worn on the extremity (hands/feet/ankle/wrist).

APPENDIX

Warning
The ME EQUIPMENT or ME SYSTEM is suitable for home healthcare environments.

• Warning: Don’t near active HF surgical equipment and the RF-shielded room of an ME system for magnetic resonance imaging, where the intensity of EM disturbances is high.
• Warning: Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally.
• Warning: Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and result in improper operation.
• Warning: Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the iScale, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result.

EMC Guidance
Guidance and manufacturer’s declaration-electromagnetic emissions and immunity.

Table 1

Guidance and manufacturer’s declaration – electromagnetic emissions

Emissions test| Compliance

RF emissions CISPR 11

|

Group 1

RF emissions CISPR 11

|

Class B

Harmonic emissions IEC 61000-3-2

|

Not applicable

Voltage fluctuations/flicker emissions

IEC 61000-3-3

|

Not applicable

Table 2

Guidance and manufacturer’s declaration-electromagnetic immunity

Immunity Test| IEC 60601-1-2

Test level

| Compliance level
Electrostatic discharge (ESD) IEC 61000-4-2| ±8 kV contact

±2 kV, ±4 kV, ±8 kV, ±15 kV air

| ±8 kV contact

±2 kV, ±4 kV, ±8 kV, ±15 kV air

Electrical fast transient/burst IEC 61000-4-4| Not applicable| Not applicable
Surge

IEC 61000-4-5

| Not applicable| Not applicable
Voltage dips, short interruptions and voltage variations on power supply input lines

IEC 61000-4-11

| Not applicable| Not applicable
Power frequency magnetic field| 30 A/m

50 Hz/60 Hz

| 30 A/m

50 Hz/60 Hz

IEC 61000-4-8|  |
Conducted RF IEC 61000-4-8| Not applicable| Not applicable
Radiated RF IEC 61000-4-3| 10 V/m

80 MHz-2.7 GHz

80% AM at 1 kHz

| 10 V/m

80 MHz-2.7 GHz

80% AM at 1 kHz

NOTE UT is the a.c. mains voltage before application of test level.

Table 3

Guidance and manufacturer’s declaration – electromagnetic immunity|
---|---
Radiated RF IEC61000-4-3

(Test specifications for ENCLOSURE PORT IMMUNITY to

RF Wireless

| Test Frequency (MHz)| Band

(MHz)

| Service| Modulation| Maximum Power (W)| Distance

(m)

| IEC 60601-1-2

Test Level

(V/m)

| Compliance level

(V/m)

|
385| 380-390| TETRA 400| Pulse modulation 18 Hz| 1.8| 0.3| 27| 27|
450| 430-470| GMRS 460,

FRS 460

| FM ±5k Hz

deviation

| 2| 0.3| 28| 28|
communica-|  |  |  | 1 kHz sine|  |  |  |  |
tions| 710| 704-787

800-960

| LTE Band 13,

17

GSM 800/900, TETRA 800,

iDEN 820,

CDMA 850,

LTE Band 5

| Pulse modulation 217 Hz

Pulse modulation 18 Hz

| 0.2

2

| 0.3

0.3

| 9

28

| 9

28

|
equipment)|
745|
 | 780|
 | 810|
 | 870|
 | 930|
 | 1720| 1700-| GSM 1800;| Pulse| 2| 0.3| 28| 28|
 |  | 1990| CDMA 1900;| modulation|  |  |  |  |
 |  |  | GSM 1900;

DECT;

| 217 Hz|  |  |  |  |
1845|
 |  |  | LTE Band 1,

3, 4, 25;

|  |  |  |  |  |
1970|
 |  |  | UMTS|  |  |  |  |  |
 | 2450| 2400-| Bluetooth,| Pulse| 2| 0.3| 28| 28|
 |  | 2570| WLAN,| modulation|  |  |  |  |
 |  |  | 802.11| 217 Hz|  |  |  |  |
 |  |  | b/g/n, RFID|  |  |  |  |  |
 |  |  | 2450, LTE|  |  |  |  |  |
 |  |  | Band 7|  |  |  |  |  |
 | 5240| 5100-| WLAN,| Pulse| 0.2| 0.3| 9| 9|
 | 5800| 802.11| modulation|  |  |  |  |
5500|
 |  | a/n| 217 Hz|  |  |  |  |
 | 5785|  |  |  |  |  |  |  |

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>