KRINNER 94238 Black Edition Ultra Grip Instruction Manual
- June 11, 2024
- KRINNER
Table of Contents
KRINNER 94238 Black Edition Ultra Grip
TRANSLATION OF THE ORIGINAL INSTRUCTIONS FOR USE
The volume of water that the container can hold will be reduced once the tree is in place
Dear customers,
thank you for choosing a high-quality KRINNER Christmas Tree Stand. With the
purchase of this quality product you can be sure you have made a good choice.
Before using this tree stand, please read the Instructions for Use thoroughly
and strictly follow the Safety Instructions at all times! Please store the
unit carefully
Warning
To prevent floor damage due to possible leakage, please check the water
tank for cracks and holes yearly before tree setup.
MODEL
INSTRUCTION SET UP
Ultra Grip XXL : Please remove the adapter for trees with a trunk diameter of more than 10cm.
INSTRUCTION TAKE DOWN
For the durability of the tree stand and to relieve the mechanics during storage, we recommend to store it in the OPEN position
STORAGE
SAFETY INSTRUCTIONS
SCOPE OF USE AND SAFETY INSTRUCTIONS
- Do not use the tree stand for any other purpose but to hold a naturally grown Christmas tree. KRINNER will not cover any damage done by misuse of this Christmas tree stand.
- This Christmas tree stand is for indoor use only.
- Before putting up your Christmas tree, ensure that your tree stand has a secure base. A thick carpet is not a secure base! Only use the tree stand on a solid, level and even surface. Uneven or inclined surfaces cause reduced stability and enhance the risk of the tree to fall.
- The Christmas tree stand is not a toy! Do not allow children to operate or use it.
- A fresh and green Christmas tree not only looks better but also reduces the fire hazard. The trunk must have a fresh, clean, straight and even cut to absorb water (there is a danger of tilting otherwise!). The trunk may not be drilled in the middle, the bark must be intact as the tree absorbs the water in between the stem and the bark. Therefore always keep sufficient water in the tree stand. Only fill in tab water.
- Overfilling will result in water emerging under the base plate, which may result in damage, especially underneath the Christmas tree stand. To prevent floor damage due to possible leakage, please check the water tank for cracks and holes yearly before tree setup.
- While pushing down the foot lever with your foot, ensure that there are no hands or other body parts in between the clamps and the trunk as it can cause serious injuries by squeezing. Watch your children!
- Ensure that the tree is securely fastened, well balanced and positioned in the middle of the tree stand before applying decorations and lighting.
- This KRINNER Christmas tree stand is a safety product. Do not alter the construction of the KRINNER Christmas tree stand. Also do not use the KRINNER Christmas tree stand if it shows any damage.
- Repair may strictly only be carried out by authorized personal.
- If electric lighting is used, do not allow this electric lighting to burn unattended. Caution! Water is a conductor. Ensure that electric wires are in a safe distance to the water tank of the Christmas tree stand.
- Never allow real candles to burn unattended. We recommend not using real candles once the tree has dried out.
- Keep your tree away from fireplaces, heater vents and any open flame.
Subject to technical and design alterations.
EU CONFORMITY DECLARATION
TRANSLATION OF THE ORIGINAL EU CONFORMITY DECLARATION
Producer
Machine: Christmas Tree Stand (single cable)
Applicable EU Directives: Machine Directive 2006/42/EG
We hereby confirm that the machine mentioned above satisfies the above-
mentioned EU Directive.
The authorised representative for the compilation of the technical documents
is Mr Günther Thurner, Passauer Str. 55, 94342 Straßkirchen/Germany.
Straßkirchen, den 01.01.2022, Klaus Krinner, Managing Director
KRINNER GmbH
Passauer Str. 55
94342 Straßkirchen
Deutschland
www.krinner.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>