altus ADV70W 7kg vented tumble dryer User Manual

altus ADV70W 7kg vented tumble dryer

Please read this user manual first!
Dear Customer, Thank you for preferring a Altus product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product to someone else, give its manual as well. Pay attention to all details and warnings specified in the user manual and follow the instructions given therein.
Use this user manual for the model indicated on the cover page.
Read the instructions.
Explanation of symbols
Throughout this user manual the following symbols are used:
DANGER!
Warning against electric shock.
DANGER!
Warning against fire hazard.
A WARNING!
Warning for hazardous situations with regard to life and property.
WARNING! Warning against hot surfaces.
WARNING! Warning against scalding hazard.
NOTE: Important information or useful hints about usage.

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.
Do not dispose of the packaging wastes with the domestic waste or other wastes, discard them to the dedicated collection points designated by the local authorities.

Important instructions for safety and environment

NOTE: This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

General safety

WARNING! The dryer can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children should not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone.

•  Children of less than 3 years should be kept away unless continuously supervised.
• Adjustable feet should not be removed. The gap between the dryer and the floor should not be reduced with materials such as carpet, wood and tape. This will cause problems with the dryer.

For the products with a steam function:

WARNING:

• Use only distilled water or water condensed in the water tank of the machine in steam programs. Do not use mains water or additives.  When using condensed water in the water tank, it should be filtered and cleared of fibres.
• Do not open the door when steam programs are running. Hot water may be expelled
• Before putting laundry in a steam program, stains on it should be removed.
• You may only put laundry that is not dirty or stained but permeated with unpleasant odour in steam (odour removal) program.
• Do not use any dry cleaning sets or additional materials in a steam program or in any program.

Electrical safety

• Electrical safety instructions should be followed while electrical connection is made during the installation.

• The appliance must not be supplied through an external switching device, such as a timer,or connected to a circuit that is regularly switched on and off by utility.

• Connect the dryer to a grounded outlet protected by a fuse at the value specified on the type label. Have the grounding installation performed by a qualified electrician. The manufacturer shall not be liable for any damages that will arise when the dryer is used without grounding in accordance with the local

• The voltage and allowed fuse protection is stated on the type label

• The voltage specified on the type label must be equal to your mains

• Unplug the dryer when it is not in

• Unplug the dryer from the mains during installation, maintenance, cleaning and repair

• Do not touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug

• Do not use extension cords, multi- plugs or adaptors to connect the dryer to power supply in order to decrease the risk of fire and electric

• Power cable plug must be easily accessible after installation.

• Damaged mains cable should be changed notifying the Authorized Service Agent.

• If the dryer is faulty, it must not be operated unless it is repaired by an authorized service agent! There is the risk of electric shock!

Product safety

DANGER

• Superheating of the clothes inside of the dryer can occur if you cancel the programme or in the event of a power failure whilst the dryer is running, this concentration of heat can cause self-combustion and fire so always activate the ventilation programme to cool down or quickly remove all laundry from the dryer in order to hang them up and dissipate the heat.
  Points to be taken into consideration for fire hazard: Below specified laundry or items must not be dried in the dryer considering fire hazard.

• Unwashed laundry items

• Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin or paraffin removers must be washed in hot water with plenty of detergent before being dried in the

For this reason especially the items containing the above specified stains must be washed very well, to do this use adequate detergent and choose a high washing temperature.

Below specified laundry or items must not be dried in the dryer due to the fire hazard:

• Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads.
• Clothing cleaned with industrial

Items such as lighter, match, coins, metal parts, needle etc. may damage the drum set or may lead to functional problems. Therefore check all the laundry that you will load into your dryer. Never stop your dryer before the programmed completes. If you must do this, remove all laundry quickly and lay them out to dissipate the heat. Clothes that are washed inadequately may ignite on their own and may even ignite after items in the dryer.

• You must provide enough ventilation in order to prevent gasses exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire
• Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil- affected items can prevent heat from escaping and so create a fire hazard.
• If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent – this will reduce, but not eliminate, the hazard.
• Use softeners and similar products in accordance with the instructions of their manufacturers.

Always clean the lint filter before or after each loading. Never operate the dryer without the lint filter installed.

WARNING!
 Never attempt to repair the dryer by yourself. Do not perform any repair or replacement procedures on the product even if you know or have the ability to perform the required procedure unless it is clearly suggested in the operating instructions or the published service manual. Otherwise, you will be putting your life and others’ lives in danger. There must not be a lockable, sliding or hinged door that may block the opening of the loading door in the place where your dryer is to be installed.

 Stacking over a washing machine

•  A fixing device should be used between the two machines when stacking the dryer above a washing machine. Ensure you follow the instructions on the Stacking Kit very carefully.
• Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the products on a solid floor that has sufficient load carrying capacity!
• Washing machine cannot be placed on the dryer. Pay attention to the above warnings during the installation on your washing machine.

Installation Table for Washing Machine and Dryer

Dryer Depth| Washing Machine Depth
62cm| 60cm| 54cm| 50cm
54 cm| Can be installed| Cannot be installed
60 cm| Can be installed| Cannot be installed

Intended use

• Dryer has been designed for domestic It is not suitable for commercial use and it must not be used out of its intended use.
• Use the dryer only for drying laundry that are marked accordingly.
• The manufacturer waives any responsibility arisen from incorrect usage or transportation.

Child safety

• Packaging materials are dangerous for the children. Keep packaging materials away from children.

• Electrical products are dangerous for the children. Keep children away from the product when it is operating. Do not let them tamper with the Use the child- proof lock in order to prevent the children to tamper with the dryer.
  Note: Child-proof lock is on the control panel. (See Child lock)

• Keep loading door closed even when the dryer is not in use.

Compliance with the WEEE regulation and disposing of the waste product

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product
with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.
Compliance with RoHS Directive: The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive

• Package information Packaging materials of the product are manufactured from recyclable materials in

accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Technical Specifications

EN

Height (Min. / Max.)| 85,6 cm / 86,6 cm
Width| 59,7 cm
Depth| 58,4 cm
Capacity (max.)| 7 kg
Net weight (± %10)| 32 kg
Voltage| See type label
Rated power input
Model code

• **** Min. height: Height with adjustable feet are closed.
• Max. height: Height with adjustable feet are opened maximum.
• Dry laundry weight before washing.
•  Type label is located behind the loading door.

NOTE

• Technical specifications of the dryer are subject to change without notice to improve the quality of the product.
• Figures in this manual are schematic and may not match the product exactly.
• Values stated on markers on the dryer or in the other published documentation accompanying with the dryer are obtained in laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the dryer, these values may vary.

YOUR DRYER

OVERWIEW

1. Top panel
2. Control panel
3. Loading door
4. Kick plate opening button
5. Ventilation grids
6. Adjustable legs
7. In models where the tank is placed below, the water tank is inside the toe board
8. Type label
9. Lint filter
10. Water tank drawer (in models where the tank is placed above)
11. Power cord

Package Contents
Optional – may not be included, depends on model.

INSTALLATION

Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user’s manual. If they are not suitable, contact a qualified electrician and technician to make necessary arrangements.

NOTE: Preparation of location and electrical installation for the product is under customer’s responsibility.

DANGER
Installation and electrical connections must be carried out by a qualified person.
WARNING
Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products will cause risks for your safety.

Appropriate installation location

• Install the product in an environment which has no risk of freezing and is in a stable and level position.
• Operate your product in a well ventilated, dust-free environment.
•  Do not block the air ducts in front of and under the product with materials such as long pile rugs and wooden bands.
• Do not place your product on a long pile rug or on similar surfaces.
• Do not install the product behind a door with a lock, sliding door or a hinged door which can strike the product.
• Once the product is installed, it should stay at the same place where its connections have been made. When installing the product, make sure that the rear wall of it does not touch anywhere (tap, socket, etc.) and also pay attention to install the product at a place where it will stay permanently.

DANGER

• Do not place the product on top of the power cable
• Keep at least 5 cm distance to walls or other furniture.
• The rear surface of the tumble dryer shall be placed against a wall
• This dryer is not able to be wall-mounted as it would be too too heavy for the

Ventilation hose and connection (for products equipped with an outlet

vent)

Ventilation hose allows exhaust air from inside the machine Vented dryer has 1 air outlet. Stainless sheet metal or aluminum pipes can be used instead of a hose. The pipe diameter should be minimum 10 cm.

| Hose| Pipe
---|---|---
Maximum length| 4 m| 5 m
1 elbow 45°| -1.0 m| -0.3 m
1 elbow 90°| -1.8 m| -0.6 m
1 elbow 90° short| | -2.7 m
1 wall passage| -2.0 m| -2.0 m

NOTE

• Each elbow and other passages should be subtracted from the maximum length stated above

To connect a ventilation hose;

1. Connect the air outlet hose to the hose spacer piece by turning it
2. Make the hose passages as shown below

NOTE

• Exhaust of humid air from the dryer into the room should be It may damage the walls and furniture in the room.
• The ventilation hose can be routed outdoors via a window or it can be connected to the air outlet in the
• Air outlet hose must be routed directly to the There must be a limited number of elbows as not to hinder ventilation.
• To prevent water accumulation in the hose, make sure that it is not folded on the floor.

• The ventilation hose should not be connected to the chimney of a stove or a fireplace
• Do not operate your product at the same time with heaters such as a coal or gas stove. Airflow may cause the chimney to flare up.

Adjusting feet

In order to ensure that your product operates more silently and vibration- free, it must stand level and balanced on its feet. Front feet of your product can be adjusted. Balance the machine by adjusting the feet.

1. Loosen the feet by
2. Adjust the feet until the product stands level and firmly on the floor

NOTE

• Do not use any tools to loosen the adjustable feet, otherwise, they can be
• Never remove the adjustable feet from their housings.
• You may consider using 2 plastic pieces from an Authorized Service with 2951620100 part number. These parts prevent your machine from slipping when the machine is located on wet and slippery surfaces. You may assemble mentioned parts to the front adjustable feet by fitting and pressing them to snap into ground of feet.

Transportation of the machine

1. Unplug the machine from the
2. Remove the water drain (if any) and chimney connections.
3. Drain water remaining in the machine completely before transportation

Changing the illumination lamp
In case an illumination lamp is used in your laundry dryer. To change the Bulb/LED used for illumination of your tumble dryer, call your Authorized Service. The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place laundry in the tumble dryer in a comfortable way. The lamps used in this appliance have to withstand extreme physical conditions such as vibrations and temperatures above 50°C

Preparation

Laundry suitable for drying in the dryer
Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer.
Laundry not suitable for drying in the dryer

Items with this symbol dried in the dryer. should not be

NOTE: Delicate embroidered fabrics, woolen, silk garments, delicate and valuable fabrics, airtight items and tulle curtains are not suitable for machine drying.

Preparing laundry for drying

• Laundry may be tangled with each other after washing. Separate the laundry items before placing them into the dryer.
• Dry garments having metal accessories such as zippers, inside out.
• Fasten the zippers, hooks and buckles and button sheets.
  

Things to be done for energy saving

• Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is reduced.
• Sort out the laundry depending on their type and thickness. Dry the same type of laundry together. For example thin kitchen towels and table clothes dry quicker than thick bathroom towels.
• Follow the instructions in the user manual for programmer selection.
• Do not open the loading door of the machine during drying unless necessary. If you must open the loading door, do not keep it open for a long time.
• Do not add wet laundry while the dryer is in operation
• For models with a condenser unit: clean the condenser once in a month or after every 30 operations regularly.
• Clean the filter periodically. Read the Maintenance and cleaning of filters for detailed information.
• For models with flue unit: comply with the flue connection instructions and clean the flue.
• During the drying process, air the room well where your tumble dryer is operating.

Correct load capacity

Follow the instructions in the “Programe selection and consumption table”. Do not load more than the capacity values stated in the table.

Following weights are given as examples.

Dry laundry weight before washing

Operating the product

Control Panel

1. On/Off/Programme selection button
2. Start/Pause button
3. Time Delay button
4. Audio warning level button

Symbols

Preparation of drying machine

•  Plug in the dryer.
• Open the loading door.
• Place the laundry in the drying machine without jamming them.
• Push and close the loading door.
  WARNING!

Ensure that no laundry is jammed to the loading door.

Select the desired programme using the On/ Off/Programme selection knob, the machine will turn on.
NOTE

•  Selecting a programme using the On/Off/ Programme selection button does not mean that the programme started. Press the Start / Stand-by button to start the programme.

Mix/Daily| Use this programme to dry non-pigmenting synthetic and cotton laundry items together. Sports and fitness clothes may be dried with this program.| 4| 1000| 85
---|---|---|---|---
Hygienic Care| It is a long-term program that you can use for the clothes (baby clothes, towels, underwear, etc. cotton) you require hygiene. Hygiene is provided with high temperature. It is especially suitable for durable fabrics.| 5| 800| 170
GentleCare/Shirts| It dries the shirts in a more sensitive manner, and causes less creasing and easier ironing.| 1,5| 1200| 28
Xpress Super Short| You can use this program to dry your cotton laundry that you have spun at high speeds in your washing machine.| 0,5| 1200| 35
Energy consumption values
Programmes| Capacity (kg)| *** Energy consumption value kWh per year| Energy rating star
Cottons-Extra Dry| 7| 315| 2

Energy Label standard program (AS/NZS 2442) “All the filters must be cleaned prior to test series.” All values given in the table have been fixed according to standard laboratory conditions. These values may deviate from the table according to the laundry type, laundry spin speed, environmental conditions and voltage fluctuations

Auxiliary Functions

Audible warning
Drying machine makes an audible warning when the programme is completed. If you don’t want it to make an audible warning, press the “Buzzer” button. When you press the Buzzer button, a light will illuminate and no audible warning will be made when the programme ends.
NOTE: You can select this function before or after the programme starts.

Time Delay
If you wish to dry your clothes at a later time, thanks to the time delay function, you can delay the program start up to 3 hours, 6 hours or 9 hours. Open the loading door and put the laundry in. Select the drying program. Press the time delay button to set the desired delay time. When the time delay button is pressed once, a 3-hour delay is selected and the relevant indicator lights up. When the same button is pressed again, 6 hours; and if pressed once more, 9 hours delay will be selected. If you press the time delay button again, delayed start will be cancelled. After selecting the delayed start, press the “Start/Pause” button to start the delayed start for the selected program.
NOTE: Additional laundry may be loaded/taken out during the delayed start time. At the end of the time delay countdown, the warning symbol disappears and the drying process starts

Changing the delay time
If you want to change the time during countdown, turn the on/off/program selection knob to cancel the program. Select the desired program and repeat the delayed start process. Cancelling the delayed start function If you wish to cancel the delayed start countdown and start the program right away, rotate the on/off/program selection knob to cancel the program. Select the desired program and press “Start/Pause

Warning indicators

Filter cleaning
When the programme is completed, the warning indicator for filter cleaning turns on.

Starting the programme
Press the Start/Stand-by button to start the programme. Drying indicator will light up, indicating that the programme has started.

Child Lock
The drying machine has a child lock which prevents the programme flow from being interrupted when the buttons are pressed during a programme. When the child lock is activated, all buttons on the panel except the On/Off/Programme selection knob are deactivated. Press the End Time and Buzzer buttons simultaneously for 3 buttons to activate the child lock. The child lock has to be deactivated to be able to start a new programme after the current programme is finished or to be able to interfere with the programme. To deactivate the child lock, keep the same buttons pressed for 3 seconds.

NOTE:

• When the child lock is activated, the child lock warning indicator on the screen turns on.
• Child lock deactivates when the drying machine is turned off and on by the On/ Off/Cancel knob.

When the child lock is active: When the drying machine runs, or in stand- by state, the indicator symbols won’t change upon changing the position of the programme selection knob.

NOTE:

• When the drying machine runs and the child lock is active, it beeps twice when the programme selection knob is If the child lock is deactivated without returning the programme selection knob to its previous position, programme will terminate due to the change in the programme selection knob position.

Changing the programme after it is started

• You can change the programme you selected to dry your laundry with a different programme after the drying machine starts running
• For instance, select Extra Dry programme by turning the On/Off/Programme selection knob to select Extra Dry instead of Iron Dry.
• Press the Start/Stand-by button to start the programme.

Adding and removing clothes during stand-by
If you want to add or remove clothes to/from the drying machine after the drying programme starts:

• Press the Start/Stand-by button to put the drying machine in Stand-by The drying operation stops.
• Open the loading door while in Stand- by state, and close the door after you remove or add laundry.
• Press the Start/Stand-by button to start the programme.

Cancelling the programme
If you want to cancel the programme and terminate the drying operation for any reason after the drying machine starts running, turn the On/Off/Cancel knob, the programme will be cancelled.
WARNING: The inside of the drying machine shall be extremely hot when you cancel the programme during machine operation, so run the refresh programme to allow it to cool down.

End of programme
When the program ends, the Last/Anti-Wrinkle and Fiber Filter Cleaning Warning LEDs on the program follow up indicator will illuminate. Loading door may be
opened and the dryer machine becomes ready for another run.
Bring the On/Off/Programme selection knob to
NOTE:   If the laundry is not removed after the programme is completed, the wrinkle prevention function activates for 2 hours to prevent the laundry inside the machine to get wrinkled. The programme tumbles the laundry with 10-minute intervals to prevent them from wrinkling. On/Off position to turn the drying machine off.

NOTE:

• Adding laundry after the drying operation starts may cause the dried laundry inside the machine to mix with wet laundry and leave the laundry damp at the end of operation.
• Adding or removing laundry during drying may be repeated as many times as you wish. But this operation continuously interrupts the drying operation, and thus increases programme duration and energy consumption. So, it is recommended to add laundry before the programme starts.
• If a new programme is selected by turning the programme selection knob while the drying machine is in stand-by, the running programme terminates.

Maintenance and Cleaning

Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals.

Lint Filter / Loading Door Inner Surface
Lint and fiber released from the laundry to the air during the drying cycle are are collected in the Lint Filter.

WARNING!

• Always clean the lint filter and the inner surfaces of the loading door after each drying process.

NOTE
You can clean the lint filter housing with a vacuum cleaner.

To clean the lint filter:

• Clean the entire inner surface of the loading door and loading door gasket with a soft damp cloth.

• Open the loading door.
• Remove the lint filter by pulling it up and open the lint filter.
• Clean lint, fiber, and cotton raveling by hand or with a soft piece of cloth.
• Close the lint filter and place it back into its housing.

A layer can build up on the filter pores that can cause clogging of the filter after using the dryer for a while. Wash the lint filter with warm water to remove the layer that builds up on the lint filter surface. Dry the lint filter completely before reinstalling

Cleaning the Sensors

• There are temperature sensor in the dryer that detect whether the laundry is dry or not.

To clean the sensors:

• Open the loading door of the
• Remove the lint filter by pulling it
• Clean the sensor with your hand if any fluff accumulation on

NOTE:

• Clean metal sensors 4 times a year.
• Do not use metal tools when cleaning the sensor.
•   Allow the machine to cool down if it is still hot due the drying process.

WARNING!

•  Never use solvents, cleaning agents or similar substances when cleaning since these materials can cause fire and explosion

Troubleshooting

• Drying operation takes too long.
  Fiber filter pores might be clogged. >>> Wash the filter with warm water. Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the filter drawer. (for the products with a heat pump) The condenser might be blocked. >>> Wash the condenser.(for the products with a condenser ) The ventilation grills in front of the machine may be closed. >>> Remove any objects in front of the ventilation grills that blocks air. Ventilation may be inadequate because the area the machine is installed in is too small. >>> Open the door or windows to prevent the room temperature from rising very high. A lime layer may have accumulated on the humidity or temperature sensors. >>> Clean the humidity or temperature sensors. Excessive amount of laundry might be loaded. >>> Do not load the drying machine excessively. Laundry might not have been wrung adequately. >>> Perform a higher speed wringing on the washing machine.

• Clothes come out damp after drying.
  A program not suitable for the laundry type may have been used.>>> Check the maintenance labels on the clothes and select a program suitable for the clothes’ type or use time programs as extra. Fiber filter pores might be clogged. >>> Wash the filter with warm water.
  The condenser might be blocked. >>> Wash the condenser. (for the products with a condenser) Filter drawer might be clogged. >>> Clean the sponge and filter
  cloth (if any) in the filter drawer.(For the products with a heat pump) Excessive amount of laundry might be loaded. >>> Do not load the drying machine excessively. Laundry might not have been spun adequately. >>> Perform a higher spin speed setting on the washing machine.

• Drying machine does not turn on or program cannot be started.
  Drying machine does not run after it is configured.
  Power plug might be unplugged. >>> Make sure the power cord is plugged in.
  Loading door might be open. >>> Ensure that the loading door is properly closed. A program might not be set or Start/Stand-by button might not be pressed. >>> Check that the program is set and it is not in Standby position. Child lock may be activated. >>> Turn off the child lock.

• Program terminated prematurely for no reason.
  Loading door might not be closed completely. >>> Ensure that the loading door is properly closed. There might be a power outage. >>> Press the Start/Stand- by button to start the program. Water tank may be full. >>> Empty the water tank.

• Clothes have shrunk, hardened or spoiled.
  A program not suitable with the laundry type might have been used. >>> Check the maintenance labels on the clothes and select a program suitable for the clothes.

• The lighting inside the drying machine does not turn on. (For models with a lamp)
  Drying machine might not be turned on with the On/Off button or program might not be selected for machines without an On/Off button. >>> Make sure that the drying machine is turned on. Lamp might be malfunctioning. >>> Contact Authorized Service to
  replace the lamp.

• Filter cleaning warning symbol/LED is on/flashing.
  Fiber filter might not be cleaned. >>> Clean the filter. The filter slot might be clogged with lint’s. >>> Clean the filter slot. A layer of fluff might have accumulated clogging up the lint filter pores. >>> Wash the filter with warm water. The condenser might be blocked. >>> Wash the condenser.

• Water drips from the loading door.
  Fibers might have gathered on the inner sides of the loading doored the loading door gasket. >>> Clean the inner surfaces of the loading door and the loading door gasket surfaces.

• Loading door opens by itself.
  Loading door might not be closed completely. >>> Push the loading door until the closing sound is heard.

• Water tank warning symbol / led is on/flashing.
  Water tank may be full. >>> Empty the water tank. Water discharge hose might have collapsed. >>> If the product is connected directly to the water drain check the water discharge hose.

• Steam symbol is flashing.(For the products with a steam function)
  Steam tank may be empty => Fill the steam tank with distilled or condensed water.

• Steam programs do not start (For the products with a steam function)
  Steam tank may be empty, steam tank warning icon may light up on the screen => Fill the steam tank until the steam icon goes off.

• Wrinkles are not removed with wrinkle removing program. (For the products with a steam function)
  Excess amount of laundry may have been placed => Place specified amount of laundry. Steam application time may be selected in low level => Choose a program with high amount of steam. After completion of the program, the laundry may have stayed in the machine for a long time => Take the laundry out as soon as the program finishes, and hang it out.

• Laundry odor not lessened with the odor removal program. (For the products with an odor removal program)
  Excess amount of laundry may have been placed => Place specified amount of laundry. Steam application time may be selected in low level => Choose a program with high amount of steam.

WARNING!
If the problem persists after following the instructions in this section, contact your vendor or an Authorized Service. Never try to repair your product yourself.

NOTE:

• Operating the appliance with non-authentic parts may lead the appliance to malfunction.
• Manufacturer and distributor are not liable for malfunctions resulting from using.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>