My 3-in-1/Magic Vac®/Featherweight® Lightweight Stick Vac has no/low suction | Support
- June 7, 2024
- Bissell
Table of Contents
-
Test for suction at the motor duct
-
Remove dirt container & filter
-
Plug machine in and turn on
-
Place hand over opening on machine where pre-motor foam filter sits
-
If no suction, visit a BISSELL Authorized Service Center or Contact Us
-
If there is suction, inspect the filters
- Dirty filters can cause damage to the motor and eventually no power if not properly maintained
- Clean debris from the pre-motor foam filter
- Remove filter from dirt cup
-
Unlock filters and separate to clean
-
Shake over waste container to remove debris
-
After heavy use, both filters can be washed in warm water & mild dish soap
-
Allow to completely dry (24 – 48 hours) before re-installing
-
Filters should be replaced if torn or damaged
-
Filter must be inserted securely into dirt cup before attaching to the machine to prevent blowing dust
-
If you continue to have suction or blowing dust issues, please visit a BISSELL Authorized Service Center or Contact Us
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>