GAMDIAS APOLLO-M1 Elite ATX Mid Tower Gaming Case 2 ARGB Fans Installation Guide
- June 5, 2024
- GAMDIAS
Table of Contents
GAMDIAS APOLLO-M1 Elite ATX Mid Tower Gaming Case 2 ARGB Fans Installation
Guide
EXPLODED VIEW PARTS
PARTS
0. Chassis Body
- Tempered Glass Side Panel
- Right Side Panel
- Top Dust Filters
- Mesh Front Panel
- ARGB IO Port
- 20CM ARGB FAN
- HDD Cage
- Rubber Foot
- 120 MM Fan
ACCESSORY
| Figure | Parts Name | Qty | Used for |
|---|---|---|---|
| Stand-off 4.75 x 9.5 x 6.5mm | 3 | Motherboard | |
| Screw #6 x 6 mm | 6 | PSU | |
| Screw #6 x 5 mm | 9 | HDD | |
| Screw M3 x 5 mm | 18 | 2.5″ HDD/Motherboard/ODD | |
| CableTie | 5 | Cable Management |
SIDE PANEL REMOVAL
Remove the side panel
MOTHERBOARD INSTALLATION
PSU INSTALLATION
Place the PSU in proper location
3.5″ 2.5″ HDD INSTALLATION
A. 3.5″ HDD
Align the HDD into the mounting holes and screw in.
B. 2.5″ SSD
Align the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
- Top: 2 x 120mm or 2 x 140mm
- Front: 3 x 120mm or 3 x 140mm or 2 x 200mm
- Rear: 1 x 120mm
RADIATOR COMPATIBILITY
- Top: 280 mm or 240 mm
- Front: 360 mm or 280 mm or 240 mm
- Rear: 120 mm
I/O PORTS
- Power Button
- Fan Speed Control
- Fan LED Control
- MIC
- Headphone
- USB 2.0
- USB 2.0
- USB 3.0
Sync With Motherboard : Press and Hold the FAN Speed Control Button for 3 Seconds.
Fan LED Off : Press and Hold the FAN LED Control Button for 3 Seconds.
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin- outs.
SPECIFICATIONS
-
SERIES: 20cm Fans Series
-
Product Name: APOLLO M1 Elite
-
Case Type: MID Tower
-
Dimension (L x W x H): 430 x 220 x 490 mm
16.9 x 8.6 x 19.2 inch -
Chassis Dimension (L x W x H): 370 x220 x 470 mm
14.5 x 8.6 x 18.5 inch -
Motherboard Support: ATX, Micro-ATX,Mini-ITX
-
Expansion Slots: 7
-
Material: SPCC , ABS , Tempered glass
-
Window: Front (Mesh) , Left (Tempered Glass)
-
Radiator Support: Top: 280 mm, 240mm
Front: 360 mm , 280 mm , 240 mm
Rear: 120mm -
Fan Support: Top: 2 x 120mm , 2 x 140mm
Front: 3 x 120mm , 3 x 140mm, 2 x 200mm
Rear: 1 x 120mm -
Pre-installed Fans: Front: 2 x 200mm ARGB Fans
Rear: 1 x 120mm Fan -
Pre-installed Control BOX: 6 Ports Hub (2 ports are used)
-
Motherboard Sync: 5V 3-Pin Addressable Header
-
Drive Bays: 2 x 3.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage) 2 x 2.5″
-
Clearance: CPU cooler height limitation: 165mm
VGA length limitation: 350mm
PSU length limitation: 200mm -
I/O Port: USB 3.0 x1, USB 2.0 x2, HD Audio x1,
Fan LED Control x1, Fan Speed Control x1