GAMDIAS TALOS-E2 Elite Tempered Glass RGB Mid-Tower Chassis Installation Guide
- June 5, 2024
- GAMDIAS
Table of Contents
GAMDIAS TALOS-E2 Elite Tempered Glass RGB Mid-Tower Chassis Installation
Guide
SPECIFICATIONS
SERIES: 20cm Fans Series
Product Name: APOLLO M2 Elite
Case Type: MID Tower
Dimension (L x W x H): 430 x 220 x 490 mm 16.9 x 8.6 x 19.2 inch
Chassis Dimension (L x W x H): 370 x220 x 470 mm 14.5 x 8.6 x 18.5 inch
Motherboard Support: ATX, Micro-ATX,Mini-ITX
Expansion Slots: 7
Material: SPCC , ABS , Tempered glass
Window: Front & Left (Tempered Glass)
Radiator Support: Top: 280 mm, 240mm Front: 360 mm , 280 mm , 240 mm Rear:
120mm
Fan Support:
Top: 2 x 120mm , 2 x 140mm
Front: 3 x 120mm , 3 x 140mm, 2 x 200mm
Rear: 1 x 120mm
Pre-installed Fans: Front: 2 x 200mm ARGB Fans Rear: 1 x 120mm Fan
Pre-installed Control BOX: 6 Ports Hub (2 ports are used)
Motherboard Sync: 5V 3-Pin Addressable Header
Drive Bays: 2 x 3.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage)
2 x 2.5″
Clearance:
CPU cooler height limitation: 165mm
VGA length limitation: 350mm
PSU length limitation: 200mm
I/O Port:
USB 3.0 x1, USB 2.0 x2, HD Audio x1,
Fan LED Control x1, Fan Speed Control x1
EXPLODED VIEW PARTS
PARTS
- Chassis Body
- Tempered Glass Side Panel
- Right Side Panel
- Top Dust Filters
- Tempered Glass Front Panel
- ARGB IO Port
- 20CM ARGB FAN
- HDD Cage
- Rubber Foot
- 120 MM Fan
ACCESSORY
| Figure | Parts Name | Qty | Used for |
|---|---|---|---|
| Stand-off 4.75 x 9.5 x 6.5mm | 3 | Motherboard | |
| Screw #6 x 6 mm | 6 | PSU | |
| Screw #6 x 5 mm | 9 | HDD | |
| Screw M3 x 5 mm | 18 | 2.5″ HDD/Motherboard/ODD | |
| CableTie | 5 | Cable Management |
SIDE PANEL REMOVAL
Remove the side panel
MOTHERBOARD INSTALLATION
Lay down the chassis Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
Place the PSU in proper location
3.5″ 2.5″ HDD INSTALLATION
A. 3.5″ HDD
Align the HDD into the mounting holes and screw in.
B. 2.5″ SSD
Align the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
Top
2 x 120mm or 2 x 140mm
Front
3 x 120mm or 3 x 140mm or
2 x 200mm
Rear
1 x 120mm
RADIATOR COMPATIBILITY
Top
280 mm or 240 mm
Front
360 mm or 280 mm or 240 mm
Rear
120 mm
I/O PORTS
- Power Button
- Fan Speed Control
- Fan LED Control
- MIC
- Headphone
- USB 2.0
- USB 2.0
- USB 3.0
Sync With Motherboard : Press and Hold the FAN Speed Control Button for 3
Seconds.
Fan LED Off : Press and Hold the FAN LED Control Button for 3 Seconds
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.