Eyoyo B08VJ1TZ6C Portable Tri-Screen for Laptop User Guide

Eyoyo B08VJ1TZ6C Portable Tri-Screen for Laptop

WARNING Please handle the tri-screen with care and do not press the screens to avoid damage. Do not exceed its maximum turning angle showing as below:

**Turning angle of screens**

Left screen(0° – 235°)

Right screen(0° – 180°)

Parts Overview

Tri-Screen

• Only display interface and button function, please check the actual machine for specific position of interfaces and buttons.
  

Inputs and Buttons

Choose your cables

• To determine which cables you will use, first identify your laptop’s ports using the pictures to the right or reference your laptop’s user manual.
• If your laptop has two Thunderbolt3 / USB-C with DP ports, the simplest way to use the tri-screen is with the two USB-C to USB-C cables provided.
• If your laptop does not have any Thunderbolt3 / USB-C with DP ports, you will need to use one USB-A to USB-C cable and one HDMI to Mini-HDMI cable for each screen.
• If your laptop does not have an HDMI port, then you can use any other video out ports shown to the right along with a simple HDMI adapter.
• Some laptops have USB-C ports that do not support DisplayPort over USB-C. Please reference your laptop’s user manual.

Set It Up

1. Take the tri-screen out of the box.
2. Open the two screens in the directions described in the figure.
3. Place the bracket over the back of the screen and clamp, allowing the bracket to hug the edges and sit on top of the laptop screen.
4. Take the holder for the back of tri-screen and rotating screw to adjust the length.
5. Using the necessary cables (identified on the previous page), plug on end into the tri screen and the other into your laptop. See “Inputs and Buttons” on page 2 for an input diagram.

Laptop Display Configuration

PC/WINDOWS

1. Go to your Display Settings (Star Settings  Sy >stem Display)
2. Click and drag screens to configuration shown
3. If you need to set different display modes for multiple screens, please click 1/2/3 (click the “Identify” button down the screen to find the corresponding screen) and select the one, then enter into the “Multiple displays” menu to set
4. If any of the screens are upside down, click on the screen in the display menu. Then click on the “Orientation” dropdown menu and select “Landscape (flipped)”
5. To increase the zoom, click the “Change the size of text, apps, and other items ” dropdown and select “150%”
   • Keeping three displays sync can be configured in setting of graphic card. If there is any issue please consult local distributor.
   • Please note the resolution of 10.1 inch is 1920*1200

Laptop Display Configuration

MAC

1. Open “System Preferences”
2. Select “Displays” from the menu
3. Click “Arrangement” from display menu
4. Click and drag screens to configuration shown
5. If any of the screens are upside down, click on the Display menu on that screen and select “180 degrees” from the dropdown
6. To increase the zoom, click the “Scaled” radio button.
   • Please note the resolution of 10.1 inch is 1920*1200

OSD Function Introduction

1. Press the ” “ Menu button to activate the OSD menu
2. Press “+” button to choose your settings
3.  Press Menu “ ” button to confirm
4.  Press “-” button to return to previous page

OSD Setting

Brightness

• Brightness:
  The adjusting range is from 0 to 100.

• Contrast:
  The adjusting range is from 0 to 100.

• Black Level:
  The adjusting range is from 0 to 100.

• Sharpness:
  The adjusting range is from 0 to 100.

Image
Brightness:
ECO: Preset display settings for various modes (Standard/ Game/ Movie/ Text/ FPS/ RTS Modes)
DCR: Select ON or OFF to enable or disable dynamic contrast ratio function
Aspect: Adjusts the aspect ratio to 4:3/ WIDE

OSD Setting

Color Temp
Color Temp: Enables the adjustment of each
individual RGB color, or select a Warm or Cool preset level
Red: The adjusting range is from 0 to 100 Green: The adjusting range is from 0 to 100 Blue: The adjusting range is from 0 to 100 OSD Setting

Language: Select OSD language. The selections are: English, French, German, Simplified Chinese, Italian, Spanish, Portuguese, Turkish, Polish, Nederlands, Japanese, Korean OSD Timer:
Sets time-out for monitor settings menu (10-60 seconds)
Transparency:
Sets transparency of monitor settings menus

OSD Setting

Reset:
Selects REST to revert all settings to the factory default mode

MISC.
Signal Source:
Contains two signal sources Type C and HDMI Low
Blue Light:
Decreases blue light content in display
HDR MODE:
Enables HDR (High Dynamic Range) if connected to a compatible device Contains three modes (off/ auto/ 2084)

Tech Specs

Screen size| 10.1 inch| 11.6 inch| 11.9 inch| 13.3 inch
---|---|---|---|---
Adaptive for laptop panel| Length < 328mm

Thickness < 7mm

| Length < 372mm

Thickness < 7mm

| Length < 417mm

Thickness < 7mm

Resolution| 19201200| 19201080
Aspect ratio| 16 : 10| 16 : 9
Backlight type| W-LED
Power| 5V 2A (Per screen)
HDR| HDR 10
Speaker| NA
Mini HDMI| 19201200@60HZ| 19201080@60HZ
Type-C 3.1/Thunderbolt 3| 19201200@60HZ| 19201080@60HZ
Type-C| Only for power

Language

| English, French, German, Simplified Chinese, Italian, Spanish, Portuguese, Turkish, Polish, Nederlands, Japanese, Korean
Dimension| 286x182x25mm| 318x215x25mm| 357x233x25mm
Tri-screen weight| 837g| 1.15kg| 1.17kg| 1.3kg

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>