Upgraded Bluetooth Receiver for Car with Qulacomm CSR, Bluetooth Car Adapter, Bluetooth-Complete Features/Instruction Guide

Upgraded Bluetooth Receiver for Car with Qulacomm CSR, Bluetooth Car

Adapter, Bluetooth

Specifications

• Package Dimensions
  6.34 x 5.59 x 0.75 inches

• Item Weight
  2.89 ounces

• Chip
  Qulacomm

• Bluetooth version
  5.0

• **Battery capacity**
  180mAH

• Charging voltage
  DC+5V

• Frequency Range
  2.4GHz-2.480GHz

• Connectivity Technology
  Bluetooth, Auxiliary

• Input Device Interface
  Bluetooth, 3.5mm Jack

• Special Feature
  Hands-Free Calls, Built-In Microphone

• Brand
  Beeitzie

Introduction

Through a 3.5 mm connection, the automobile Bluetooth adaptor converts non- Bluetooth devices to wireless. Audio adaptor for Bluetooth Low latency, more reliable connection, quicker transmission speed, greater range, and high- definition audio decoding technology are all provided by the newest Qulacomm Bluetooth 5.0 CSR8635 chip. Bluetooth devices such as mobile phones, speakers, headphones, and car/home stereos are compatible with this aux Bluetooth converter. The built-in microphone picks up sound, and the “MFB” button takes care of answering, redialing, hanging up, and rejecting calls, freeing up your hands. Voice announcements from navigation Apps can also be transmitted using the Bluetooth audio receiver.

This Bluetooth audio receiver may be completely charged in 1.5 hours and then used for over 16 hours on a single charge. This Bluetooth audio converter may also be used while charging, which is even handier.

What’s In the Box?

• Bluetooth Receiver 1
• 3.5mm Metal Audio Adapter 1
• 3.5mm Audio Cable 1
• Micro USB Charging Cable 1
• User Manual 1

Steps to Pairing

1. When you turn on the receiver, the indicator light alternates between red and blue, indicating pairing mode.
2. Using the included 3.5mm audio cable, connect the AUX port on the Bluetooth receiver to the audio input port of the house speaker or car stereo system, or insert your 3.5mm wired earphone into the AUX port on the Bluetooth receiver.
3. Use your phone’s Bluetooth capability to search for “DWR20” and connect. The indicator glows blue once every 5 seconds after a successful connection. You may now listen to music or take calls without having to use your hands.

What is the best way to pair two devices at the same time?

1. Turn off the Bluetooth function of the first Bluetooth device after successfully pairing, and the Bluetooth receiver will enter pairing mode again.
2. Turn on your Bluetooth device’s Bluetooth feature, search for “DWR20,” and connect.
3. Turn on the first Bluetooth device’s Bluetooth feature, then choose “DWR20” from your connection history. The Bluetooth receiver is now connected to two devices.

Indicator for the battery

The power of the wireless receiver will be displayed on the phone once it has been properly linked with the phone, so you can see how much time it has been used. The battery % wi ll be displayed on most Android phones’ Bluetooth- linked device interface.

Frequently Asked Questions

• How can I get the voice assistant to work?
  To switch on or off the voice assistant, press and hold MFB for 1 second.

• How can I connect the Bluetooth receiver to my computer?
  Turn on the Bluetooth receiver, then turn on the Bluetooth on the computer: Go to Computer Settings > Bluetooth & Other Devices > Add Bluetooth or Other Devices > Bluetooth > Bluetooth > Locate DWR20 and click Connect.

• How do I rejoin and operate if I can’t connect?
  When the DWR20 is switched on, it will automatically reconnect the paired device after it has been successfully linked to your phone once. If it doesn’t work, try connecting manually: To enter pairing mode, press and hold the MFB for 5 seconds, then click to connect DWR20 on the mobile phone’s Bluetooth list.

• How to reconnect and operation when failed to reconnect？
  After the DWR20 is successfully connected to your phone once, it will automatically reconnect the paired device when powered on. If it fails, please connect manually: Press and hold the MFB for 5 seconds to enter pairing mode, and then click to connect DWR20 in the Bluetooth list of the mobile phone.

• I am a truck driver and use GPS a lot, will this Bluetooth receiver for the car pick up the navigation signal?
  This is not a GPS device. It is a Bluetooth receiver. This device would connect your phone to your truck sound system via the aux jack. Allowing you to play audio from your phone through your truck including but not limited to Pandora, Spotify, YouTube, and yes GPS navigation voice.

• What functions can I use by linking this Bluetooth receiver and is it easy to connect?
  This Bluetooth receiver can not only connect to non-Bluetooth car audio systems, but also can be used in your home or office, and connect to your home stereo, speakers, wired headphones, smartphones, tablets, laptops, and computers.

• How do I activate the voice assistant?
  Press and hold MFB for 1 second to turn the voice assistant on or off.

• How to pair the Bluetooth receiver with a computer?
  Turn on the Bluetooth receiver, turn on the computer’s Bluetooth: select computer settings > Bluetooth & other devices > Add Bluetooth or other devices

  Bluetooth > Find DWR20, click connect.

• Can the Bluetooth adapter be used while charging?
  Of course, my wife bought the Bluetooth receiver she does this a lot, she loves listening to music and the experience is so good it’s worth buying.

• How long can I use this aux Bluetooth adapter with one charge?
  Bluetooth receiver battery capacity is great, I’m full of electricity and should use the 15 hours, it’s incredible.

• What devices does this Bluetooth aux adapter work on?
  I use it to connect my Samsung S8+ to the car stereo system in my 2009 Lexus LS 460. It works great. The sound is fantastic.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>