SUREBONDER 5659 Heavy Duty Triggerfire Cable Tacker Gun Owner’s Manual

SUREBONDER 5659 Heavy Duty Triggerfire Cable Tacker Gun

HOW TO LOAD A SUREBONDER STAPLE GUN

1. STEP#1
   Determine length of staples to be used for your project.

   • A. The staple should sit flush with your fastened material and sink 3/16″ into base material.
   • B. If staple doesn’t sit flush then the staple is too long, try a shorter leg length.

2. STEP#2
   Squeeze the track release and pull out the track.

3. STEP#3
   Load a staple strip into the empty chamber with the points facing up.

4. STEP#4
   Push the track release closed and now you’re ready to start your project.
   NOTE : If the staples are loaded incorrectly the track will not close.
   Push track in until it clicks shut

SUREBONDER.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>