eta 16 Bagless vacuum cleaner Instruction Manual

eta 16 Bagless vacuum cleaner

INSTRUCTIONS FOR USE Dear customer, thank you for purchasing our product. Please read the operating instructions carefully before putting the appliance into operation and keep these instructions including the warranty, the receipt and, if possible, the box with the internal packing

SAFETY WARNING

GENERAL PROVISIONS:

• Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
• This appliance may only be used by children aged 8 years or older, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children younger than 8 years must be kept out of reach of the appliance and its power cord.
• Before replacing accessories or any accessible parts, before assembly and disassembly, before cleaning or maintenance, when you let the appliance unattended or if you finish the work with the appliance, switch off the appliance and disconnect it from the mains by unplugging the power cord plug from electrical socket.
• The appliance is designated to be used indoor only.
• Never immerse the appliance in water (not even partially) and do not wash it under running water!
• Do not put fingers or other things to input and output vents of the appliance.
• In order to ensure safety and proper function of the appliance, use only original spare parts and accessories approved by the manufacturer.
• Only use this appliance for the purpose it was designed for, as specified in this manual.
• The manufacturer is not responsible for damage caused by improper use of the appliance and the accessories and its warranty for the appliance does not apply in situations when the safety warnings above are not complied with.

USE OF THE APPLIANCE:

• The product is only intended for home use and similar purposes (in shops, offices and similar workplaces, at hotels, motels and other residential environments, and in facilities providing bed and breakfast). It is not intended for commercial use!
• When carrying, do not hold the vacuum cleaner using the handle of the dust container!
• The appliance must not be used in damp or wet environment and in any environment with the danger of fire or explosion.
• Do not vacuum wet or moist floor coverings, and do not use the vacuum cleaner outdoor!
• Do not vacuum sharp objects (e.g. glass, shatter), hot, flammable, explosive items (e.g. ash, hot cigarette butts, gasoline, thinners and aerosol vapours) or greases (e.g. fats, oils), caustic agents (e.g. acids, solvents).
• Do not use the appliance to vacuum water, liquids or aggressive fluids!
• Do not use the vacuum cleaner to vacuum dirt produced during/after construction such as plasterboard dust, fine sand, cement, dust from construction, parts of plaster etc.
• WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.

ACCESSORIES AND ASSEMBLY OF THE APPLIANCE:

• Do not put the suction nozzle or the tube end or accessories close to eyes and ears and do not insert them into body orifices!
• Do not use the brush for treatment and cleaning animal hairs!
• Do not leave the floor nozzle with the rotation brush on in one place for too long! It could cause damage to the surface vacuumed!
• To prevent injury, do not touch the rotating brush with your hands/fingers.

POWER CABLE:

• Check whether the data on the type label corresponds with the voltage in your socket. The power cord plug may only be connected to the electrical socket complying with the applicable standards.
• If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person.
• Always disconnect the appliance from power by unplugging the power cord from the electrical socket, if the appliance is left unattended and before assembly, disassembly or cleaning.
• Never use the appliance if the power cord or power plug are damaged, if the appliance is not correctly operating or if it has fallen on the floor and been damaged, or if it has fallen into water.
• Do not unplug the power plug by pulling the power cord or the vacuum cleaner unit.
• The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into water or bent over sharp edges.
• Check the condition of the power cord of the appliance regularly.

EQUIPMENT AND ACCESSORIES

1. A1 – ON/OFF ( ) button
2. A2 – power cord winding button
3. A3 – knob for suction power regulation
4. A4 – suction vent
5. A5 – depression for attachment of accessories
6. A6 – power cord
7. A7 – rear wheels
8. A8 – exhaust grid
9. A9 – output HEPA filter
10. A10 – exhaust grid aretation
11. A11 – holder
12. B1 – container lock button
13. B2 – container holder
14. B3 – cover lock
15. B4 – cover
16. B5 – HEPA filter
17. B6 – suction filter
18. B7 – seal
19. B8 – separator
20. C1 – floor nozzle
21. C2 – upholstery nozzle
22. C3 – brush
23. C4 – crevice nozzle
24. C5 – suction hose
25. C6 – suction hose locking
26. C7 – telescopic suction tube
27. C8 – telescopic suction tube locking
28. C9 – mechanical suction power regulator

VACUUM CLEANER PREPARATION

Remove all packing material, take out the vacuum cleaner and the accessories. Remove all possible adhesion foils, stick-on labels or paper from the appliance. VACUUM CLEANER ASSEMBLY When assembling the vacuum cleaner, follow the procedure indicated in Fig. 1. Choose appropriate accessories as required (D, C1 – C4, C10, C11) (Fig. 5). The telescopic suction tube C7 can be set to an optimum length to suit the user´s height.

USE OF VACUUM CLEANER

Before use, unwind (by pulling) the power cable A6 from the vacuum cleaner to a required length and plug the vacuum cleaner to the mains.

• vacuum cleaner ON/OFF switch
• when pressed and held, the unwound part of the power cable rewinds back inside
• by turning it to the right, you increase the suction power
• by turning it to the left, you reduce the suction power

DermoPet ADAPTER

• slide accessory (D2/D3/A4) into the nozzle D untill it clicks into the place. Pull on the accessory to remove it from the nozzle D.
• Assemble the D1 accessory on the front part of the nozzle and slide it on with a slight pressure. The accessory is assembled correctly if it moves freely.

Before the first use of we recommend to use the nozzle with switched off vacuum cleaner. It will help the animal to get accustomed to the way of cleaning. Subsequently leave sufficient time for an animal to be accustomed to the sound of the vacuum cleaner (better with the presence of the owner). It will help to avoid the animal being stressed, nervous, irritated, etc. Setting of the vacuum cleaner suction power is depended on the individual assessment of the animal‘s skin/hair dirtying. During the cleaning performance of vacuum suction can be smoothly changed.
According to the type/length of hair/skin and its dirtying choose the most appropriate accessory for the nozzle. Gently attach the nozzle to the body of the animal at an optimum angle and clean it with smooth movements.

ATTENTION
In case if your animal has health problems (for example, dermatological disease), contact and consult your veterinary first before using the appliance.

REMOVING THE DUST CONTAINER AND FILTERS

• DUST CONTAINER REMOVAL
  When taking out and disassembling the dust container B follow the procedure indicated in Fig. 4. Dispose of dirt contained in the dust container with regular household waste. An emptied and cleaned container is to be put back into the vacuum cleaner in reverse order.

• INPUT FILTERS REPLACEMENT
  To remove the input filter, follow the procedure indicated in Fig. 4. To fit a new input filter in the vacuum cleaner, proceed in reverse order.

• OUTPUT FILTER REPLACEMENT
  To remove the input filter, follow the procedure indicated in Fig. 3. To fit a new output filter in the vacuum cleaner, proceed in reverse order.

CLEANING AND MAINTENANCE

Treat the surface of the appliance with a soft and damp cloth, do not use coarse and aggressive detergents!
Accessories
After any vacuuming, it is recommended to check visually the brushes or collectors for possible impurities. If there are some impurities, remove them.

Cleaning the TURBO nozzle
Cut the threads and hairs with scissors. Turn on the vacuum cleaner. The cleaner vacuums the cut hairs and threads. In case hairs or threads got tangled up around the attachment of the brush cylinder and cannot be removed with the above-mentioned steps, it is necessary to remove them with a suitable tool (e.g. tweezers).

Dust container
Clean the surface and the inside of container B with a soft wet cloth. Rinse the separator B8 and the seal under running water. Allow all the parts to dry out properly before their re-use.

Input and output filters
Rinse the filter B6 under running water. Allow them to dry out properly before their re-use. Shake out the input HEPA filter (A9, B5) gently, or blow it out. If the HEPA filter is very dirty, you can rinse it under running lukewarm water. Allow it to dry out properly. .

Caution

• Do not clean the HEPA filters or the other filters with any aggressive washing or cleaning detergents or hot water.
• In order to maintain the filtering parameters of the HEPA filters, we recommend that you use a dry method of cleaning.
• If you clean the HEPA filters with water, its filtration properties will deteriorate. The filter cannot be washed more than three times. After that, a new filter needs to be purchased.
• If the filters are not cleaned or replaced, it might result in damaging the vacuum cleaner!

Other parts
Clean the telescopic suction tube C7 and suction hose C5 with a wet cloth. Allow all the parts to dry out properly before re-use.

ENVIRONMENTAL PROTECTION

If the dimensions allow, there are labels of materials used for the production of packing, components and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal of the product, hand it over at special collection places where it will be taken over free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authority or at the local waste collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations. If the appliance is to be put out of operation, we recommend its cutoff after disconnecting it from power supply and in this way it will not be possible to use the appliance again.

TECHNICAL DATA

• Voltage (V) / Input (W) specified on the type label of the appliance
• Protection class of the appliance II.
• Weight (kg) approx. 4.7
• Size of the product (mm)
• Noise level 435 x 290 x 300
• Input in off mode is 0.00 W  80 dB(A)

The manufacturer reserves the right to change the technical specifications and accessories for the respective models. Replacement of parts that require intervention in the electric part of the appliance must be carried out by a specialized service! Failure to comply with the instructions of the manufacturer will lead to expiration of the right to guarantee repair! HOUSEHOLD USE ONLY; DO NOT IMMERSE IN WATER OR OTHER LIQUIDS; TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

References

• AEG Hausgeräte | Setzen Sie auf Qualität | AEG
• ETA - tady je doma
• ETA - tu je doma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>