HQ POWER VDL30MB2 300mm Rotating Disco Ball Mirror User Manual

: June 5, 2024
: HQ-POWER

Table of Contents

Introduction
Safety Instructions
General Guidelines
Installation
Technical Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VDL10MB2/VDL20MB2/ VDL30MB2/VDL50MB2

USER MANUAL

Introduction

To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing HQPower! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

Safety Instructions

Read and understand this manual and all safety signs before using this appliance.

This device can be used by children aged 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
A qualified technician should install and service this device.
Keep the device away from children and unauthorized users.
This device is designed for professional use on stage, in discos, theatres, etc.
Select a location where the device is protected against extreme heat, dust, and moisture.
Mirror balls should be fixed with an appropriate safety cable.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified people. Any damage that may occur will most probably be due to the unprofessional use of the device.
Use the original packaging if the device is to be transported.
All modifications of the device are forbidden for safety reasons and are not covered by the warranty.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Installation

Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable norms.
The construction to which the device is attached should be able to support 10 times the weight of the device for one hour without deformation. The installation area should be able to hold a minimum point load of 30 kg.
The installation must always be secured with a secondary attachment, e.g. a safety cable or safety net.
Install the device in a location with few passers-by that is inaccessible to unauthorized persons.
Overhead mounting requires extensive experience: calculating workload limits, determining the installation material to be used… Do not attempt to install the device yourself if you lack these qualifications as improper installation may result in injuries. Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified technician check the device once a year and once before you bring it into service.
Have a qualified electrician carry out the electric connection.
The installation has to be approved by an expert before the device is taken into service.
The mirror ball (3) has to be properly attached to the mirror ball motor (1).
Use mains powered mirror ball motor (1) HQMB15001 or an equivalent in combination with a safety cable (5). Make sure the safety cable is securely attached to the safety rings (4 & 6) and is slightly longer than the mirror ball chain (2).
The safety cable should be installed in such a way that no part of the installation can fall down if the main attachment fails and that it can hold at least 12 times the weight of the installation for 1 hour without any harmful deformation.
Make sure the mirror ball is never slowed down or stopped by decoration material etc. Make sure no side forces can impact the installation.

Technical Specifications

| VDL1OMB2| VDL2OMB2| VDL3OMB2| VDL50MB
---|---|---|---|---
diameter| 10 cm (4″)| 20 cm (8″)| 30 cm (12″)| 50 cm (1910/16”)
approximate weight| 0.19 kg| 0.75 kg| 1.4 kg| 4.9 kg
appropriate motor|

HQMB15001

Use this device with original accessories only. Velleman Group NV cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change without prior notice.

Velleman® Service and Quality Warranty
Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries.
All our products fulfill strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organizations. If, all precautionary measures notwithstanding, problems should occur, please make an appeal to our warranty (see guarantee conditions).

General Warranty Conditions Concerning Consumer Products (for EU):

All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
Velleman® can decide to replace an article with an equivalent article or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
Not covered by warranty:
– all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
– consumable goods, parts, or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, nonrechargeable, built-in or replaceable),
lamps, rubber parts, drive belts… (unlimited list);
– flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
-flaws caused deliberately, negligently, or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
– damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
– damage resulting from an inappropriate packing and shipping of the article;
– all damage caused by modification, repair, or alteration performed by a third party without written permission by Velleman®.
Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
Hint: In order to save on cost and time, please re-read the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
Repairs occurring after warranty expiration are subject to shipping costs.
The above conditions are without prejudice to all commercial warranties.

The above enumeration is subject to modification according to the article (see article’s manual).

© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Group NV. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated, or reduced to any
electronic medium or otherwise without the prior written consent of the copyright holder.

Made in PRC
Imported by Velleman Group nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.perel.eu