boAt Rockerz 245 V2 Wireless Bluetooth Headset Instruction Manual

June 5, 2024
Boat

boAt Rockerz 245 V2 Wireless Bluetooth Headset Instruction Manual

That you for choosing the boAt Rockerz 245v2.11is manual is meant to guide you through to the shores of Noma without too much difficulty. Please think of this manual as your map. Knowledge of Bluetooth and device correction is essential for the steering of this boat. Therefore, we strongly advise that this manual is thoroughly read before beginning of use, and refened to when m times of difficulty. Air you ready to Plug into Nirvana?

Package contents

  • 1 x boAt Rocket’ 245v2
  • 1 x Micro USB charging cable
  • 2 x Pairs of additional earbuds ( Smal & large)
  • 1 x Manual
  • 1 x Warranty Card

Product Diagram

Product Diagram

To Pair with Bluetooth

When switched off, press the multifunction button for 5 seconds to enter pairing mode. The earphones will automatically enter pairing mode with a prompt and the LED light will flash white and blue lights flash to indicate this.

  1. Open Bluetooth an you device and search for boAt Rixiterz 245v2tin the list of available devices,
  2. Choose “boAt Rrxkerz 245v7 from the list and enter the pairing password ‘0000” to establish Bluetooth connectivity.
  3. A yoke prompt-You’re now connected to boAt Rockers 245v2″wil be heard to confirm the connection. The blue LED light flashes twice every 4 seconds when connected.

Functions

  1. Power on: When switched off, press and hold the multifunction button for 3 seconds. A voice prompt ‘power cm’ will confirm the same. The red and glue LEDs wil flash.
  2. Power off In any mode, press and hold the mull multifunction button for 5 seconds. A voice tone ‘power off “will confirm the same. The red and blue LED’s will flash for 1 second before the device will turn off.
  3. Play/Pause:Tap the multifunction button nice to play/pause MUSK.
  4. Volume up: Tap the volume +”buttons in steps to increase the volume. A beep wil indicate maximum volume.
  5. Volume down: Tap the volume” “button in steps to decrease the volume. A beep will indicate minimum volume.
  6. Answer/Fed call’ Tap the multifunction button once when answering or ending a Call to complete the action.
  7. Reject call: Press and hold the multifunction button for 1 seconds when receiving a call to reject it. A beep will indicate this.
  8. Previous Track To go to the previous track, press and hold the “.” button for 2 seconds.
  9. Next Track To skip to the next track, press and hold the”÷” button for 2 seconds.
  10. Voice Assistant Click the Multi-function &Mon for 3 tines to activate Voice Assistant

To Charge: Use a micro U58 charging cable to charge the earphone through either a laptop or an adaptor

  1. low Battery The remaining talk time is less than 10 minutes. There wdl be a *tone and a reminder every minute.
  2. Charging: The red light is steady (please note that the earphone cannot be tum on when charging).
  3. Fully charged: the blue light is steady.

Specifications

Bluetooth version 5.0 Transmission distance about 10m
Speaker size 12m Battery Size Polymer lithium Battery 3.7v/100mAH
Frequency range 20-20000Hz Charging time about 1.5 hours
Impedance 322±15% play/take time about 18 hours
Sensitivity 105±3dB Standby time about 180 hours
Microphone Sensitivity 42±3 db Magnetic suction Basic suction

Troubleshooting

Problem Cause Problem Problem Solution
Not Loading Battery is exhausted Fully charge with the charger
Long press the power button for too short Press and hold the main button for

3 seconds to restart
Not Charging| Charging plug is not plugged in| Reinsert the charging plug
Not Shut down| Misoperation caused the headset program to go wrong| Charge reset with the charger
Unable to search pair failed| The headset did not enter
paring status| Put the headset into the pairing state
reset
Mobile phone Bluetooth application error| Turn off the phone and reboot

Safety Caution

  • Please don’t dismantle the product in any way or remove the product’s battery by yourself, as this can lead to a re or electrical breakdown. Any maintenance or servicing of the earphones should be done only through a qualied service provider/manufacturer

  • Please clean the earphones with the utmost of care with only a damp soft cloth, if cleaning is required. Please do not use any oily volatile liquid. In addition, ensure that the earphones are kept away from extremely hot or cold substances.

  • Any damage to the earphones that is NOT a manufacturing issue will make the products warranty null and void.

  • Do not use earphones when it is unsafe to be wearing them, such as while operating a vehicle, crossing a street, or during any activity where full awareness of your surroundings is required.

  • To avoid damage to your hearing, make sure that the volume on your music player is at an appropriate level when you are Plugging into Nirvana. Exposure to any noise levels at or above 85 dB can gradually lead to a loss of hearing.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals