SHARP SSC2489GS Smart Combi Steam Oven Installation Guide

: June 5, 2024
: Sharp

Table of Contents

SPECIAL WARNING
CLEARANCES AND DIMENSIONS
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION HARDWARE
OVEN MEASUREMENTS
INSTALLATION INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SSC2489GS SMART COMBI STEAM OVEN
INSTALLATION MANUAL

SPECIAL WARNING

INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE THIS INSTALLATION MANUAL FOR THE LOCAL ELECTRICAL INSPECTORS’ USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

CLEARANCES AND DIMENSIONS

For SAFETY CONSIDERATIONS do not install an oven in any combustible cabinetry which is not in accord with the stated clearances and dimensions on page 3, Figure 2 or page 4, Figure 3.

UNPACKING YOUR OVEN

Remove all packing materials from inside the oven before installation and operation.
Check the oven for any damage, such as misaligned or bent door, damaged oven seals and sealing surfaces or dents inside the cavity or on the front side of the oven. If there is any damage, do not operate the oven. Contact your dealer or a SHARP AUTHORIZED SERVICER.

IMPORTANT NOTES TO THE INSTALLER

Read the entire Installation Manual before installing the oven. Remove all packing material before connecting the electrical supply.
Observe all governing codes and ordinances.
Leave these instructions with the consumer.
Installation of this oven requires two people.

IMPORTANT NOTES TO THE CONSUMER
Keep this manual with your Operation Manual for future reference.

As when using any oven generating heat, there are certain safety precautions you should follow. These are listed in the Operation Manual. Read all and follow carefully.
This oven should only be installed and grounded properly by a qualified installer or service technician.

IMPORTANT SAFETY INSTRUCTIONS

WARNING If the information in this manual is not followed exactly, a fire or electric shock may result and cause property damage, personal injury or death.

This oven must be electrically grounded in accordance with local codes.
Do not install this oven where the surrounding wall coverings and the cabinets cannot withstand the heat generated by the oven.

WARNING Do not use the oven as a storage space.

INSTALLATION HARDWARE

NAME	QTY	PART CODE
4	LX-CZB073MRE0

CHOOSING A LOCATION FOR YOUR OVEN
You will use your oven frequently, so plan its location for ease of use. Your oven can be built into a cabinet or wall by itself or above any electric wall oven or Microwave Drawer model that specifies the combination of this oven. The oven may be mounted below a 36″ countertop, including a cooktop or island. It cannot be built in above any gas wall oven.

OVEN MEASUREMENTS

CLEARANCES AND DIMENSIONS FOR STANDARD SURFACE MOUNT

CLEARANCES AND DIMENSIONS FOR FLUSH MOUNT

INSTALLATION INSTRUCTIONS

WARNING Always use caution lifting heavy products.

Open the Smart Combi-Steam Oven door and use lift points in Figure 4. Place the oven adjacent to the wall or cabinet opening. DO NOT LIFT THE OVEN WITH A HANDLE. Plug the power supply cord into the electrical outlet.
Carefully guide the Smart Combi-Steam Oven into the prepared opening. Avoid pinching the cord between the oven and the wall.
Slide the oven all the way until the mounting flange is flush with the face of the cabinet. See Figure 6.
Open the door. Using the 4 holes on the oven as a template, pre-drill the cabinet using a 1/16″ bit. See Figure 6.
Secure the Smart Combi-Steam Oven with the 4 screws supplied. See Figure 6.

ELECTRICAL OUTLET

The electrical requirements are a 120 volt 60 Hz, AC only, 15 amp. or more protected electrical supply. It is recommended that a separate circuit serving only this appliance be provided. The oven is equipped with a 3-prong grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded. Should you only have a 2-prong outlet, have a qualified electrician install a correct wall receptacle.

Install the oven in a cabinet with the proper 3-prong outlet or in a cabinet adjacent to a proper 3-prong outlet if the provided power supply cord can reach the outlet. Do not use an extension cord.
Note: Always check electrical codes for requirements. If you have any questions about the grounding or electrical instructions, consult a qualified electrician or service person.

GROUNDING INSTRUCTIONS

This appliance must be grounded. The oven is equipped with a 3-prong plug which includes a grounding pin. It must be plugged into a wall receptacle that is properly installed and grounded in accordance with the National Electrical Code and local codes and ordinances. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current.

WARNING Improper use of the grounding plug can result in a risk of electric shock. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceperson install an outlet near the appliance.

BEFORE YOU CALL FOR SERVICE

Read the BEFORE YOU CALL and operating instruction sections in your Operation Manual. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this Smart Combi-Steam Oven. Refer to the warranty in your Operation Manual for Sharp’s toll-free service number and address. Please call or write if you have inquiries about your Smart Combi-Steam Oven product and/ or need to order parts.

MODEL AND SERIAL NUMBER LOCATION
The model number and serial number are printed on the nameplate. To access the nameplate, open the drip tray door and remove the drip tray. The nameplate is located to the left of the reservoir.

CARE, CLEANING AND MAINTENANCE
Refer to the Operation Manual for cleaning instructions.

SHARP ELECTRONICS CORPORATION
• 100 Paragon Drive
• Montvale, New Jersey 07645
• USA
SHARP ELECTRONICS OF CANADA LTD
• 335 Britannia Road East
• Mississauga, Ontario
• L4Z 1W9
TINSKB265MRR1