NOD Intro Portable FM-CD-USB-MP3 AUX Player with LCD Display User Manual
- June 5, 2024
- NOD
Table of Contents
NOD Intro Portable FM-CD-USB-MP3 AUX Player with LCD Display
INSTRUCTION MANUAL
Thank you for choosing our product. We hope you will enjoy using the appliance.
SYMBOLS IN THESE INSTRUCTIONS FOR USE
Important information for your safety is specially marked. It is essential to
comply with these instructions in order to avoid accidents and prevent damage
to the machine:
GENERAL NOTES
Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the receipt and, if possible, the box. If you give this device to other people, please also pass on the operating instructions.
SPECIAL SAFETY INSTRUCTIONS FOR THIS MACHINE
-
The appliance is designed exclusively for private use and for envisaged purpose. This appliance is not fit for commercial use
-
Use the appliance only on a level work surface.
-
To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, efc. Do not expose the appliance to naked flame sources (for example, lighted candles).
-
Keep it away from sources of heat, direct sunlight and humidity (never dip it into any liquid). Do not Use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
-
When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the affected áccessories.
-
Do not operate the machine without supervision.
If you leave the room you should always turn the device of. Remove the plug from the socket. -
The device and the main lead have to be checked regularly for signs of damage. If damage is found the device must not be used.
-
Do not try to repair the appliance on your own. Always contact an authorized technician or our customer service to avoid exposure to danger.
-
Never remove the enclosure. If the internal parts are touched, a serious electric shock might occur
-
In order to ensure your children’s safety, please keep all packaging of their reach
-
After long time of operation, the top and rear panels of the device are hot. Do not touch them! Let the device cool down. This does not show a malfunction of the device.
-
If an abnormal smell of smoke is detected, immediately tum the power OFF and unplug the appliance from the wall outlet. Contact your dealer.
-
The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
IMPORTANT OPERATING INSTRUCTIONS VENTILATION
Slots and openings in the cabinet are provided for ventilation, fo ensure reliable operation of and to protect the appliance from overheating.
CD TRAY
- Be careful when opening/closing the CD tray, keep your fingers away to avoid possible injury.
- Do not place any weight on top of the casing of the device in order to avoid accidents and prevent damage to the device.
- To prevent direct exposure fo laser beam, do not look directly inside the tray when opening/closing the CD lid.
- Take out any CD when device not in use.
- . Always furn off all input devices when you connect/ disconnect them to the device.
CD HANDLING PRECAUTIONS
- Hold the disc so that you do not touch the playing Surface
- Do not attach paper or tape to either the playing side or the label side of the disc.
- If there are fingerprint marks or foreign matter found on the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner.
- When a disc is not to be played for a long period of time, remove it from the player and store it in its case.
- During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent.
- Please do not Use discs which are not round because they may cause malfunction.
ELECTRIC CONNECTION
- Make sure the device is switched off.
- Connect the mains cable to a properly installed and earthed wall outlet.
CLASS 1 LASER PRODUCT
The marking of this product has been classified as Class 1. It means that there is no danger of hazardous radiation outside the product. Location: Rear panel
CLEANING
-
Before cleaning, always turn off the appliance and remove the mains plug.
-
Do not immerse the device in water. Otherwise this might result in an electric shock or fire.
CAUTION: -
Do not use a wire brush or any abrasive items.
-
Do not use any acidic or abrasive detergents. The exterior of the device should be cleaned if necessary with a slightly damp cloth – without any
additives.
STORAGE
- Clean the appliance as described and let it dry completely.
- For longer periods of non-use, we recommend storing the appliance in its original packaging.
- Always store the appliance in a well-ventilated and dry place out of reach of children.
BATTERY PRECAUTIONS
If you use the batteries incorrectly, the battery fluid will leak and the battery will become corroded.
Therefore, please operate correctly by following the instructions.
- Open the battery compartment which is at the bottom side of the device and insert the batteries. Pay attention to the correct polarity. Close the battery compartment.
- Do not charge non-rechargeable batteries, disassemble, or set fire to the battery.
- Do not use different battery models together or old with new batteries.
- Do not leave the damaged battery at the appliance.
- If battery fluid leaks, firstly clean the battery compartment and then replace them with new batteries.
OVERVIEW OF THE COMPONENTS AND CONTROLS
REAR AND BOTTOM PART
- Telescopic antenna
- Power input
- Ventilation openings
- Battery compartment
FRONT PANEL
- Handle
- CD compartment
- CD compartment opening handle
- Power on / off
- Tuning key (Previous] button CD/USB: Use to go back or skip to the next audio file. RADIO: Use go back or skip to the next preset radio station.
- STOP / REP /MEM button
- LCD screen
- Power indicator light
- Volume down button
- Volume up button
- LINE IN port
- LINE IN port
- USB port
- Sound mode button FLAT/ CLASS/ JAI.Z /ROCK/ POP Input mode button FM/ LINE/ CD / USB
- Tuning key (Next] button CD/USB: Use to fast forward/fast rewind a track. RADIO: Use to change radio frequency
- PLAY / PAUSE / P+ / SCAN button
- Left audio output
- Right audio output
- Anti-skid legs
ELECTRICAL CONNECTION
- Check whether the mains voltage that you want to use, corresponds with that of the appliance. You will find the information about it on the rating plate.
- Plug mains lead to the wall socket.
UNPACKING THE APPLIANCE
- Remove the appliance from its packaging.
- Remove all packaging materials such as films, filler material, cable clips and carton.
- Check the contents for completeness. In the event that the packaging content should be incomplete or if damages are noticeable, do not operate the appliance. Return it to the dealer immediately
Function| LCD disolav
---|---
CD (while opening the CD comnortment| OP
USB| USb
LINE IN connection of external device| AUX
Radio FM| FM selected rex: 89.71
Saved radio channels| P01-P20
VOLUME| UOO-U32
FUNCTION MODE| FM / LINE / CD /USB
SOUND MODE| FLA/ CLAS / JAZ.Z / ROC / POP
GENERAL OPERATION
ANTENNA FM
- Remove the telescopic antenna from its slot and unfold it to its full extent.
- Locate it in a position with good reception.
- CAUTION:
Be sure to fully extend the FM antenna cable. Keep the antenna away from the speaker cords, the AC power cord and the AUX cable to avoid picking up noise.
TUNING ON / OFF THE DEVICE
- Turning on: Press the Power on / off (4) button on the front panel to tum the device on.
- Turning off: Press again the Power on / off (4) button on the front panel to turn the device off.
- If the device is not used for a prolonged period, unplug it from power.
- VOLUME
- Turn the Volume down (9) / Volume up (10) button on the front panel to increase/ decrease the volume accordingly.
- NOTE:
- Set the volume of the external device to a proper audible level.
AUDIO PROFILE SETTINGS
- You can change the audio tone of each input function is performed each time on your player.
- The audio effect may vary depending on the audio source and each effect.
- Press the MODE button (14) to select the desired audio profile between FLAT/ CLASS/ JAZ.Z /ROCK/ POP.
SOURCE SELECTION
- Press repeatedly the MODE button (14) on the front panel to select one of the input sources: FM / LINE/ CD / USB.
- Press repeatedly the MODE button (14) again ones again to change to USB input.
CD FUNCTION
1. Open CD compartment using the handle (3). OP appears on the display.
2. Insert the CD with the printed side facing up.
3. Press repeatedly the MODE button (14) on the front panel until “Cd”
appears on the display.
4. “–” will appear on the screen for a short time.
5. The CD starts playback. The playing time of the current track is displayed
on the screen.
6. To remove a CD, press the STOP/REP/MEM button. “OP” appears on the
display. Eject the CD.
7. Close CD compartment.
DESCRIPTION OF CONTROLS IN CD FUNCTION
- You can pause and resume playback using PLAY/PAUSE/P+/SCAN button. The elapsed playing time will be shown in the display.
- With tuning buttons (5/15), (previous/next) you can go back or skip to the next audio file.
- With pressing repeatedly tuning buttons (5/15) you can fast forward or fast rewind a track.
- Press STOP/REP/MEM (6) button to stop the playback.
- In order to repeat your favorite song during playback, press repeatedly the STOP/REP/MEM (6) button.
RADIO FM FUNCTION
- Make sure the FM antenna is open to its full extent. (section “ANTENNA FM”)
- Press the MODE button (14)) on the front panel until FM frequency appears in the display.
AUTO PRESET
- To preset automatically the tunable radio stations of your area:
- Press repeatedly the PLAY /PAUSE/P+/SCAN (16) button.
- Automatic search function is performed between 87.0- 108.0 FM.
- Every station with a good reception is stored.
- A maximum of 20 stations being received will be preset.
MANUAL PRESET
- A station can also be tuned even when is not preset.
- You can press the tuning buttons (5/15) to go onwards or backwards by 0.1 Hz from the currently played station and find your desired frequency.
- For saving frequency press STOP/REP/MEM (6) button repeatedly and select the desired number of station.
- Saving will be completed after a while.
NOTE:
- You can perform again auto preset when you shift to another location whereby the broadcast station frequencies are different.
- If several stations are preset under the same number, the previous memory is replaced with the latest memory contents.
DESCRIPTION OF CONTROLS IN RADIO FUNCTION
Press the PLAY/PAUSE/P+/SCAN (16) button to go directly to select the desired stored station.
CONNECTION OF EXTERNAL DEVICES USB FUNCTION
- Press the MODE button (14) until “USb” appears on the display.
- Insert the USB into the corresponding port (13). The «- ” message will appear on the screen for a short time.
- Track starts playing. The playing time of the current track is displayed on the screen.
- Before removing the USB, use the MODE button (14) to switch to a different input source.
- NOTE:
All audio files are played on a queue, the system’s playback order may differ from the order in which folders are stored.
- NOTE:
DESCRIPTION OF CONTROLS IN USB FUNCTION
- You can pause and resume playback using the PLAY/PAUSE/P+/SCAN (16) button.
- The elapsed playing time will be displayed on the screen.
- You can scroll to the next/ previous track with the tuning buttons (5/15).
- You can fast forward or fast forward within a track by pressing tuning buttons (5/15) repeatedly to. Press the PLAY /PAUSE/P+/SCAN (16) button again to pause the search and playback from the desired point.
- Press the STOP/REP/MEM (6) button to stop playback.
- During playback to repeat your favorite song, press the STOP/REP/MEM (6) button repeatedly:
- Press once to repeat playback of the already playing song. “ONE” appears on the screen.
- Press twice to repeat playback of all songs in this folder (in USB mode). “FILE” appears on the display.
- Press three times to repeat playback of all tracks on the CD. “ALL” appears on the screen.
AUX / LINE IN jack function
- Press the MODE button (14) on the unit “AUX” appears on the display.
- Connect the audio output of a portable device (smartphone, tablet, MP3 player) to the LINE IN (11) input port on the front panel of the unit, with the supplied 3.5mm jack cable.
- Start playback from the external source.
- Before removing the connection cable, use the MODE button (14 button to switch to a different input source.
TROUBLESHOOTING
Problem | Cause | Solulfon |
---|---|---|
No function. | The appliance is not connected to the mains supply | Check the |
receptacle using another aooliance.
Securely connect the
mains olua.
No sound.| Volume is too low or
muted
| Increase the volume
from the panel or tum
mute off.
Input devices are not connected correctly| Connect to the correct ports or disconnect and
connect once again.
The CD or input device does not operate.| The CD or input device
includes unsupported file formats.
| Jump to the next audible files, of .mp3
.wma formats.
Poor sound quality| Radio signal too weak.| Try to adjust the antenna position and search again for radio
stations.
CD cannot be played
back.
| CD is not inserted or inserted incorrectly.| Ensure that the disc is
inserted with the label facina uowards.
CD jumps during
playback.
| Check the disc for
fingerprints, dirt or scratches.
| Clean the disc or insert
a different one.
GENERAL SPECIFICATIONS
Documents / Resources
| NOD
Intro Portable FM-CD-USB-MP3 AUX Player with LCD
Display
[pdf] User Manual
Intro Portable FM-CD-USB-MP3 AUX Player with LCD Display
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>