Etymotic Research EVO Three Driver Earphones Operational Manual

Etymotic Research EVO Three-Driver

SPECIFICATION

• BRAND Etymotic Research
• MODEL NAME EVO
• COLOR Blue
• FORM FACTOR In Ear
• CONNECTIVITY TECHNOLOGY Wired
• PRODUCT DIMENSIONS 6 x 5.04 x 3.03 inches
• ITEM WEIGHT 1 ounces
• IMPEDANCE 50 Ω
• SOUND SIGNATURE Tonal Neutrality
• MICROPHONICS Very low

WHAT’S IN THE BOX

• Etymotic EVO Earphones
• Estron Linum BaX T2™ Cable
• Aluminum Case
• Cloth Bag
• 2 Flange, 3 Flange, and Foam Eartips
• Replacement Filters
• Filter replacement tool

INTRODUCTION

With deep roots in acoustic research and the hearing aid industry, Etymotic invented insert earphones in 1984. The first versions were used for diagnostic testing and precision auditory research (ER-1, 2, 3). Etymotic engineer, Steve Iseberg, produced the first noise-isolating high-fidelity in-ear earphone using balanced armature drivers, the ER-4 (1991), which became the basis of all subsequent in-ear earphones and in-ear monitors worldwide. Thus creating an entire category of consumer electronics, and established these speakers as the gold standard for high definition in-ear earphones. The ER-4 earphones are still produced and channel-balanced to within 1 dB in Etymotic’s labs in the US.
Innovation, education and hearing preservation are central to Etymotic’s mission. Etymotic’s products are used by university researchers, hearing practitioners, hearing-impaired consumers, professional and amateur musicians, and others who demand superior sound quality.

THREE BALANCED ARMATURE DRIVERS

• Two-Way Crossover DesignCreating a Tight, True Low-end Sub Bass
• Molded Stainless Steel Body to Craft Geometrically Complex Curves

Featuring strong | linum BaX T2

Premium Detachable 50-inch Reference Cable

Extra strength and tangle free double-twisted cable with T2TM connector and 3.5mm angled mini jack plug. Conveys music with supreme precision, impact and dynamics.

TECH SPECS

• FREQUENCY RESPONSE 20 Hz – 16 kHz
• TRANSDUCERS Three balanced armature drivers
• IMPEDANCE 47 ohms
• SENSITIVITY 1khz – 99 dB SPL at 0.1V
• CROSSOVER 1 highs & mids / 2 lows

CARE AND MAINTENANCE

• Remove the rubber earbuds and clean them out with a damp towel.
• Then, use a toothpick dipped in water to remove all the wax, dead skin cells and dust from the inner areas of your earbud.
• Also, gently clean through the wires if it has accumulated dust.
• Inspect your device for dirt and grime regularly.

FEATURES

• 3-drivers, two-way configuration with dual bass drivers.
• Stainless steel housing with metal injection molding
• Sensitivity: 1khz – 99 dB SPL at 0.1V & Impedance : 47 ohms
• Delivers a true and transparent sound across the entire frequency spectrum.
• With Estron Linum BaX T2 Cable

Note:  Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.

Warranty & Support

If you’d like a copy of the manufacturer’s warranty for a product found on Amazon.com, you can contact the manufacturer directly or visit their website for more information. Manufacturer’s warranties may not apply in all cases, depending on factors like the use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.

Frequently Asked Questions

How do you pair the Etymotic Research EVO headphones?****

The first time you remove both earphones from the charging case, the headphones will turn on and connect to your Bluetooth device. At all other times, simply take the earphones out of the charging case, and your phone will be immediately connected.

How can charging and volume issues be resolved?****

Wipe the mesh, eartips, and charging contacts with an alcohol pad to get rid of any dust or earwax that might be hindering charging or sound volume.

Without a phone connection, how can I unlock the Etymotic Research EVO earbuds?****

When the headphones are turned off, the touch sensors on both earphones vanish. Press and hold the button for three seconds in order to turn it on. (The green light is on for a brief moment)

How long can you use the wireless Etymotic Research EVO earbuds?****

The 60%/60-minute rule, which specifies that no music, video game, or movie should be played at more than 60% of its maximum loudness, is one that doctors advise following. No more than 60 minutes should be spent using earbuds at once.

What is the proper way to wear Bluetooth Etymotic Research EVO earbuds?****

To wear the headphones, insert the earbud tips into your ear canal and twist the headphones into place. Pull up on the top of your ears gently to do this. This makes it easy to make sure the headphones are firmly and accurately positioned in the ear canal.

When not in use, where should Etymotic Research EVO wireless earphones be stored?****

Keep your devices as often as you can at room temperature instead than storing them outside, wearing them in a sauna, or leaving them in a hot or cold automobile. (If the temperature bothers you, there’s a strong chance your earbuds do too.)

Etymotic Research EVO wireless earbuds: How secure are they?****

Since Bluetooth is a non-ionizing EMR, it generally has no negative effects on people. In fact, Bluetooth’s low specific absorption rates (SAR) provide more evidence of its user-friendliness.

How are Etymotic Research EVO earbuds to be used safely?****

Lower the volume. The greatest way to protect your hearing while listening to music is to lower the volume. Utilize headphones with noise cancellation. Use headphones instead of earbuds. obey the 60/60 principle. Set a volume limit.

Can one Etymotic Research EVO earbud be used simultaneously?****

However, if you only want to wear one earbud, you can listen to music in mono. Both earphones are in use, and the case is open. The left or right earbud is being utilised after the shell is opened.

How can I prevent the Etymotic Research EVO earbuds from coming unplugged?****

If the earbud tip continues falling off, try wiping it down with alcohol to get rid of any leftover oil or wax. This can occasionally be enough to restore proper tip grip. But if that doesn’t work, you might consider using the tried- and-true Teflon tape or superglue technique to keep them firmly in place.

Do Etymotic Research EVO earbuds allow for sleep use?****

There is no risk in wearing headphones while attempting to catch some shut-eye as long as your earphones are comfortable enough to keep you from being disturbed as you sleep. By listening to peaceful music or a calming podcast before bed, you can lower your heart rate and stop your mind from thinking about your everyday stresses.

How can I prevent my wireless Etymotic Research EVO earbuds from falling out?****

Ear hooks or over-the-ear/around-the-ear designs that clasp around your ears are what keep them in place. If you want to wear headphones while participating in activities that need a more secure fit than other types of earphones, they are the best since they offer a better and more steady hold.

How are the wireless Etymotic Research EVO earbuds charged?****

After inserting the earbuds, close the charging case’s lid. When the lid of the charging case is open, the battery LED within displays the colour of the earbuds’ current battery: red, yellow, or green. About two hours are needed to fully recharge the earbuds.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>