OMPHOBBY M2-V2 Helicopter for adults Instruction Manual

OMPHOBBY M2-V2 Helicopter for adults Instruction Manual

Thank you for buying OMP HOBBY products .The M2 is the latest technology in Rotary RC mldels .Please read this manual carefully before assembling and flying the New M2 helicopter. We recommend that you keep this manual for future reference regarding and maintenance.

INTRODUCTION

Thank you for buying OM PHOBBY Products. The M2 Helicopter is designed as an easy to use,full featured Helicopter R/C model capable of all forms of rotary flight. Please read the manual carefully before assembling the model, and follow all precautions and recommendations located within the manual. Be sure to retain the manual for future reference, routine maintenance, and tuning.

The M2 is a new product developed by OMPHOBBY. lt features the best design available on the Micro-Heli market to date, providing flying stability for beginners,full aerobatic capbility for advanced fliers, and unsurpassed reliability for customer support.

WARNING

Mishandling due to failure to follow these instructions may result in damage or injury.

CAUTION

Mishandling due to failure to follow these instructions may result in danger.

FORBIDDEN

Do not attempt under any circumstances

IMPORTANT NOTES

R/C helicopters, including The M2 are not toys.R/C helicopter utilize various high-tech products and technologies to provide superior performance. Improper use of this product can result in serious injury or even death. Please read this manual carefully before using and make sure tobe conscious of your own personal safety and the safety of others and your environment when operating all OM PHOBBY products.Manufacturer and seller assume no liability for the operation or the use of this product . Intended for use only by adults with experience flying remote control helicopters at a legal flying field. After the sale of this product we cannot maintain any control over its operation or usage.

We recommend that you obtain the assistance of an experienced pilot before attempting to fly our products for the first time, A lcoal expert is the bestway to properly assemble, setup, and fly your model for the first time .M2 Helicopter requires a certain degree of skill to operate, and is a consumer item. Any damage or dissatisfaction as a result or accidents or modifications are not covered by any warranty and cannot be returned for repair or replacement. Please contact our distributors for free technical consultation and parts at discounted rates when you experience problems during operation or maintenance.

SAFETY NOTES

CAUTION

Fly only in safe areas,away from other people. Do not operate R/C aircraft within the vicinity of homes or crowds of people .R/C aircraft are prone to accidents,failures,and crashes due to a variety of reasons including,lack of maintenance,pilot error, and radio interference. Pilots are responsible for their actions and damage or injury occurring during the operation or as of a result of R/C aircraft models.

Precautions before use

FORBIDDEN

LOCATE AN APPROPRIATE LOCATION

R/C helicopters fly at high speed ,thus posing a certain degree of potential danger .Choose a legal flying field consisting of flat,smooth ground without obstacles.

Do not fly near buildings,high voltage cables ,or trees to ensure the safety of yourself,others and your model

For the first practice,please choose a legal flying field and can use a training skid to fly for reducing the damage .Do not fly your model in inclement weather,such as rain,wind snow or darkness.

FORBIDDEN

R/C models are composed of many precision electrical components.

It is critical to keep the model and associated equipment away from moisture and other contaminants.The introduction or exposure to water or moisture in any form can cause the model to malfunction resulting in loss of use,or a crash .Do not operate or expose to rain or moisture

FORBIDDEN

PREVENT OPETATION

Please use the replacement of parts on the manual to ensure the safety of instructors.
This product is for R/C model,so do not use for other purpose.

WARNING

OBTAIN THE ASSISTANCE OF AN EXPERIENCED PILOT

Before turning on your model and transmitter,check to make sure no one else is operating on the same frequency.Frequency interference can cause your model,or other models to crash.

The guidance provided by an experienced pilot will be invaluable for the assembly,tuning,trimming,and actual first flight.
(Recommend you to practice with computer-based flight simulator.)

WARNING

SAFE OPERATION

Operate this unit within your ability.Do not fly under tired condition and improper operation may cause in danger.

CAUTION

ALWAYS BE AWARE OF THE ROTATING BLADES

During the operation of the helicopter,the main rotor and tail rotor will be spinning at a high rate of speed .The blades are capable of inflicting serious bodily injury and damage to the environment.Be conscious of your actions,and careful to keep your face,eyes,hands,and loose clothing away from the blades.Always fly the model a safe distance from yourself and others,as well as surrounding objects.Never take your eyes off themodel or leave it unattended while it is turned on.Immediately turn off the model and transmitter when you have landed model.

CAUTION

KEEP AWAY FROM HEAT

R/C models are made of various forms of plastisc.Plastic is very susceptible to damage or deformation due to extreme heat and clod climate .Makesure not to store the model near any source of heat such as an oven,or heater.lt is best to store the model indoors ,in a climate-controlled,room temperature environment

EQUIPMENT REQUIRED FOR ASSEMBLY

When you see the marks as below,please use glue or greae to ensure flying safety.

Specifications

• Lenght： 410mm
• Height： 130mm
• Main Blade： 173mm
• Main Rotor Diameter： 400mm
• Tail Rotor Diameter： 71.5mm
• Flying Weight： 300g

Features

• Direct drive main and tail rotor design with dual brushless motor
• All metal 7075 aluminum alloy material flybarless head design
• Airframe all carbon fiber lightweight design
• Streamlined low wind resistance hood design
• 4 in 1 OFS control system
• Attitude stabillization mode and 3D lock mode switch freely

step 1

CAUTION

Thrust braring and washer for radial bearing are wear items,and thus should be inspected for replacement after every 20 flights.

For flights with high head speed ,the inspection interval should be reduced to ensure flight safety

CAUTION

Thrust bearing

step 2

step 3

step 4

step 5

step 6

step 7

step 8

step 9

step 10

tep 11

step 12

step 13

Flight parameter Setting Introduction

General Flight Model

Throttle| Screw Fetch
5| 60| 100| 11°
4| 60| 65| 5.5°
3| 60| 15| 1.8°
2| 60| -5| -0.6°
1| 0| -20| -2.4°
IDLE 1 model

Throttle| Screw Fitch
5| 65| 100| 11°
4| 65| 50| 5.5°
3| 65| 5| 0.6°
2| 65| -50| -5.5°
1| 65| -100| -11°
IDLE 1 model

Threottle| Screw Fitch
5| 80| 100| 11°
4| 80| 50| 5.5°
3| 80| 0| 0°
2| 80| -50| -5.5°
1| 80| -100| -11°
Attitude mode/ 3D mode

Modes| CH5| Flight LED control
Attitudes Mode| 75-100| | Blue LED stready lit
| Red LED stready lit
3D modes| 0-25| | Blue LED stready lit
| Red LED slow Flash
Power On Self Test / Binding

Status| Flight Control LED
Power On Self Test| | The M2 should be placed on the ground to be energized. After power on,the blue and red Led flash quickly and wait for 3 seconds until the blue Led is steady lit.
Before Binding| | Blue LED Slow Flash
After Binding| | Blue LED Steady Lit

Servo Neutral Position Adjustment

Please disconnect the main tail motor power cord before debugging to avoid potential safety hazards!

1. Tum on the remote control and power on the aircraft.After the aircraft self-testthe servo can be normally controlled;
2. Put the throttle stick to the lowest position and push the elevator roker to the highest until the flight control LED flashes red quickly;
3. Push the throttle stick to the hight position through the aileron, lift and direction rocker respecively.
4. Push the throttle stick to the lowest position,and push the elevator stick to the highest until the red Led flashes slowly or conatanly ,and the servo neutral position is saved.

Spare parts picture

Package: Hang tag +PE bag

Model: OSHM2001

Model: OSHM2002

Model: OSHM2003

Model: OSHM2004

Model: OSHM2005

Model: OSHM2006

Model: OSHM2007

Model: OSHM2008

Model: OSHM2009

Model: OSHM2010

Model: OSHM2011

Model: OSHM2012

Model: OSHM2013

Model: OSHM2014

Model: OSHM2015

Model: OSHM2016

Model: OSHM2017

Model: OSHM2018

Model: OSHM2019

Model: OSHM2020

Model: OSHM2021

Model: OSHM2022

Model: OSHM2023

Model: OSHM2024

Model: OSHM2025

Model: OSHM2026

Model: OSHM2027

Model: OSHM2028

Model: OSHM2029

Model: OSHM2030

Model: OSHM2031

Model: OSHM2032

Model: OSHM2033

Model: OSHM2034

Model: OSHM2035

Model: OSHM2036

Model: OSHM2037

Model: OSHM2038

Model: OSHM2039

Model: OSHM2040

Model: OSHM2041

Model: OSHM2042

Model: OSHM2043

Model: OSHM2044

Model: OSHM2045

Model: OSHM2046

Model: OSHM2047

Model: OSHM2048

Model: OSHM2049

Model: OSHM2050

Model: OSHM2051

Model: OSHM2052

Model: OSHM2053

Model: OSHM2054

Model: OSHM2055

Model: OSHM2056

Model: OSHM2057

Model: OSHM2058

Model: OSHM2059

Model: OSHM2060

Model: OSHM2061

Model: OSHM2062

Model: OSHM2063

Model: OSHM2064

Model: OSHM2065

Model: OSHM2066

Model: OSHM2067

Model: OSHM2068

Model: OSHM2069

Model: OSHM2070

Model: OSHM2071

Model: OSHM2072

Model: OSHM2073

Model: OSHM2074

Model: OSHM2075

Model: OSHM2076

Transmitter description

• (Product Model)：T6
• (Diameters)：L165W98H180
• (Radio Frequency)：2.413GHz–2.453 GHz
• (Transmit Power)：< 20 dBm
• (Weight)：345g
• (Modulation Mode)：GFSK
• (Spread Spectrum Mode)：FHSS
• (Working Voltage)：3.7V
• (Remote Distance)：800m
• (Charge Interface)：Micro
• (Low Voltage Alarm)：3.4V
• (Battery Type)：Lithium Polyer Battery
• (Battery Capacity)：2500mAh 3.7V
• (Coach Interface)：Yes

References

• Radioactive - environment.Be is mogelijk beschikbaar.
• OMPHOBBY | manufacturer of RC Airplanes,Helicopters, RC models

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>