M4 MAX OMPHOBBY OMP Heli PNP Orange 420 Helicopter Instruction Manual
- June 17, 2024
- OMPHOBBY
Table of Contents
- M4 MAX OMPHOBBY OMP Heli PNP Orange 420 Helicopter
- Product Information
- Product Usage Instructions
- INTRODUCTION
- IMPORTANT NOTES
- Precautions before use
- Self-provided tools
- Specifications
- Installation steps
- Operation settings
- Spare parts Pack
- Servo & Motor Spec
- Accessories package
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
M4 MAX OMPHOBBY OMP Heli PNP Orange 420 Helicopter
Product Information
Specifications:
- Model: M4 Max
- Designed by: Jonas Wackershauser
- Country of Origin: Germany
- Product Type: Rotary wing RC model
Introduction:
The M4 Max is the latest technology in rotary wing RC models. It is
designed by Jonas Wackershauser and manufactured by OMPHOBBY. This product
provides an exciting and immersive flying experience. Please read this
assembly manual carefully before assembling and flying your new M4 Max
helicopter. We recommend that you keep this manual for future reference.
Product Usage Instructions
Precautions before use:
Before using the M4 Max helicopter, please take the following precautions:
- Locate an Appropriate Location: Ensure that you are flying the helicopter in a safe and suitable area, away from homes or crowds of people.
- Prevent Moisture: R/C models are sensitive to moisture. Keep the model and associated equipment away from water or moisture in any form. Operating or exposing the model to rain or moisture can cause malfunctions and result in loss of control or crashes.
- Maloperation: Use only genuine replacement parts listed in the manual to ensure correct operation. The use of non-standard or damaged parts can void the product warranty and pose a danger. This product is designed for leisure R/C modeling and should not be used for other purposes.
Assistance of an Experienced Pilot:
It is recommended to seek the guidance of an experienced pilot before
operating the M4 Max helicopter. This assistance can be valuable for assembly,
setup, tuning, trimming, and the first flight. Additionally, practicing with a
computer-based flight simulator beforehand is also recommended.
Safe Operation:
When operating the M4 Max helicopter, keep the following in mind:
- Operate within Your Ability: Fly the helicopter within your skill level and capabilities. Do not attempt maneuvers that exceed your abilities.
- Avoid Perception-Altering Substances and Sleep Deprivation: Do not operate the helicopter under the influence of drugs, alcohol, or when sleep deprived. Such conditions may lead to dangerous situations or injury.
- Be Aware of Rotating Blades: Always exercise caution around the rotating blades of the helicopter to avoid injury. Keep your hands and other body parts clear of the blades during operation.
- Avoid Heat: R/C models are susceptible to damage from extreme heat. Store the model indoors in a climate-controlled environment. Avoid storing it near direct sunlight or a heater.
Self-provided Tools:
Before assembling the M4 Max helicopter, make sure you have the following
tools:
- Cutter Knife
- Scissors
- Needle Nose Pliers
- Diagonal Cutting Pliers
- Philips Screw Driver
- Hex Driver (1.5mm, 2mm, 2.5mm)
- Viscous Grease
Frequently Asked Questions (FAQ):
-
Can I fly the M4 Max in any weather conditions?
The M4 Max should not be operated in rain or other forms of moisture. It is best to fly in dry weather conditions. -
Can I use aftermarket parts for the M4 Max?
No, it is recommended to use only genuine replacement parts listed in the manual to ensure proper operation and maintain the product warranty. -
What should I do if I encounter a problem with the helicopter during flight?
If you experience any issues during the flight, immediately land the helicopter safely and inspect for any visible damage or malfunctions. Follow the troubleshooting guide provided in the manual or contact OMPHOBBY customer support for assistance.
Thank you for choosing OMPHOBBY products. The M4 MAX is the latest technology in rotary wing RC models, designed in Germany by Jonas Wackershauser. Please read this assembly manual carefully before assembling and flying your new M4 Max helicopter. We recommend that you keep this manual for future reference.
INTRODUCTION
Thank you for choosing OMPHOBBY products. The M4 MAX Helicopter is designed as an easy-to-use, fully-featured Helicopter R/C model capable of all styles of rotary flight. Please read this manual carefully before operating the model and follow all precautions, limitations and recommendations in the manual. Be sure to retain the manual for future reference, routine maintenance, and tuning. The M4 MAX is a new product developed by OMPHOBBY. lt features the best design available on the Mini-Heli market to date, providing high flight stability for beginners, full aerobatic capability with virtually unlimited control power for advanced pilots, as well as unsurpassed reliability for all customers.
WARNING LABEL LEGEND
- WARNING Mishandling of the helicopter and failure to follow these instructions may result in damage, injury or death.
- CAUTION Mishandling due to failure to follow these instructions may result in danger.
- FORBIDDEN Do not attempt under any circumstances.
IMPORTANT NOTES
R/C helicopters, including the OMPHOBBY M4 MAX, are not toys. R/C helicopters utilize various high-tech components and technologies to provide superior flight performance. improper use of this product can result in damage to property, serious injury or even death. Please read this manual carefully before using it and make sure to be conscious of your safety, the safety of others and your environment when operating OMPHOBBY products. Manufacturer and seller assume no liability for the operation or the use of this product. The OMPHOBBY M4 MAX is intended for use only by adults with experience flying remote-controlled helicopters at a legal flying field. After the sale of this product, OMPHOBBY cannot maintain any control over its operation or usage.
RC Helicopters require skill to operate. We recommend that inexperienced
pilots obtain the assistance of an experienced pilot before attempting to fly
our products for the first time. Local expert assistance is the best way to
assure proper assembly, setup, and safe flight of your model. Any damage or
dissatisfaction as a result of crashes, incorrect setup, modifications or lack
of necessary user skill are not covered by any warranty and cannot be returned
for repair or replacement.
Please contact our distributors for technical support and parts supply if you
experience problems.
SAFETY NOTES
CAUTION Fly only in safe areas, at a safe distance from other people. Do not operate R/C aircraft within the vicinity of homes or crowds of people. R/C aircraft may suffer accidents, failures,and crashes due to a variety of reasons including, but not limited to: Lack of maintenance, pilot error and radio interference. Pilots are responsible for their actions, as well as damage or injury occurring during the operation of their R/C aircraft models.
Precautions before use
LOCATE AN APPROPRIATE LOCATION
To ensure the safety of yourself, others and your model, do not fly near
airports, buildings, roads, crowded areas or high-voltage cables. R/C
helicopters can fly at high speed and have rotor blades spinning at high RPM,
thus posing a certain degree of potential danger during operation. Choose a
legal and safe flying field consisting of flat, smooth ground without
obstacles, other people, animals etc. For the first flights, please choose a
legal flying field with ample clear space. Flying over long grass reduces
damage in the event of a crash. Consider the use of a training landing gear.
Do not fly your model in inclement weather, such as rain, wind, snow or
darkness.
PREVENT MOISTURE
R/C models are composed of many precision mechanical and electrical
components. It is critical to keep the model and associated equipment away
from moisture and other contaminants. The introduction or exposure to water or
moisture in any form can cause the model to malfunction, resulting in loss of
control or a crash. Do not operate or expose the model to rain or moisture.
MALOPERATION
Please use only genuine replacement parts listed in the manual to ensure
correct operation. Use of non-standard or damaged parts voids the product
warranty and may cause danger. This product is designed for leisure R/C
modelling, do not use the model for other purposes.
WARNING OBTAIN THE ASSISTANCE OF AN EXPERIENCED PILOT.
Before turning on your model and transmitter, check with other RC model users
in the area that it is safe to fly. For inexperienced pilots, the guidance
provided by an experienced pilot can be invaluable for the assembly, setup,
tuning, trimming and first flight. (It is recommended to practice with a
computer-based flight simulator beforehand.)
WARNING SAFE OPERATION.
Operate this helicopter to your ability. Do not fly under the influence of
perception-altering substances, as well as when you’re sleep-deprived. It may
result in danger or injury.
CAUTION ALWAYS BE AWARE OF THE ROTATING BLADES.
During the operation of the helicopter, the main rotor and tail rotor will be
spinning at very high rotation speeds. Rotor blades are capable of inflicting
serious to lethal bodily injury and damage to the environment. Be conscious of
the hazards posed by the spinning rotor blades and maintain a safe distance
from the helicopter at all times. Always fly the model a safe distance from
yourself and others,as well as your surroundings. Never take your eyes off the
model or leave it unattended while it is turned on. Immediately turn off the
model and transmitter and remove the battery after you have landed the model.
CAUTION KEEP AWAY FROM HEAT.
R/C models are made of various forms of plastics. Plastic is very susceptible
to damage or deformation due to extreme heat and cold. Make sure not to store
the model near any source of heat, such as direct, strong sunlight or a
heater. It is best to store the model indoors, in a climate-controlled, room-
temperature environment.
Self-provided tools
When you see the marks as below, please use glue or grease to ensure flying safety.
Specifications
- Length: 830mm
- Height: 226mm
- Main Blade: 420mm
- Main Rotor Diameter: 945mm
- Tail Rotor Diameter: 190mm
- Flying Weight: 1500g
Features
- Large pitch range main rotor design for extreme control power in any situation.
- Highly compact flight mechanics design.
- Lightweight carbon fiber and aluminium airframe design.
- Streamlined low wind resistance canopy design.
- Frame mounted XT60 connector for easy battery connection.
- Open frame design for easy wiring and serviceability.
Installation steps
Operation settings
Collective pitch and rotor speed recommendations
Flying Style| Recommended RPM Range| Recommended Collective Pitch
Range
---|---|---
Hovering| 1400-1800RPM| -5°
+12°
Low RPM 3D| 1500-1900RPM| ±16°
Sport| 1600-1900RPM| ±13°
Aerobatics| 2000-2300RPM| ±13°
Soft 3D| 2300-2600RPM| ±13°
Hard 3D| 2600-2850RPM| ±13°
Tareq Alsaadi| 3000RPM| ±12°
- Maximum Rotor Speed: 3000RPM
- Maximum Collective Pitch below 1900RPM: ±16°
- Maximum Collective Pitch below 2850RPM: ±13°
- Maximum Collective Pitch above 2850RPM: ±12°
- Recommended Rotor Blades: RotorTech 420mm Ultimate, OMPHOBBY APEX 420mm.
Spare parts Pack
| Model| Quantity
---|---|---
Screw| Socket cap screw M2x4mm| 2
Socket cap screw M2.5x5mm| 2
Socket cap screw M2.5x6mm| 2
Socket cap screw M2.5x8mm| 1
Socket cap screw M2.5x10mm| 1
Countersunk head hexagon socket screw M2x3mm| 2
Countersunk head hexagon socket screw M2.5x5mm| 2
Washers| Washers Φ2xΦ4.3×0.5mm| 2
Washers Φ2xΦ8×0.2mm| 2
Washers Φ3xΦ4.5×0.2mm| 4
Washers Φ5xΦ6×0.5mm| 2
Washers Φ2xΦ3.2×0.5mm| 2
Washers Φ8.05xΦ10×0.2mm| 3
Motor specifications
Servo & Motor Spec
Servo Spec
OMPHOBBY M4 Micro Tail Servo
Model| 2312T| Operating Voltage：| 4.8V-8.4V
Working pulse length：| 500-1000us| Max Freq：| PWM max.560Hz
Connector：| 3P Dupont| Wire length：| 220mm
Servo Arm：| 25T| Operation Angle：| 140 Deg
Item：| Spec
Operating Voltage：| 7.4V
Dead Band：| 2u
Stall Current| 1.7A
Operating Speed(no load)：| 0.053sec/60°
Torque：| 3.5kg.cm
Stall Torque：| 7kg.cm
Weight| 21g
OMPHOBBY M4 Max Micro cyclic Servo
Model| 2312C| Operating Voltage：| 4.8V-8.4V
Working pulse length：| 800-2200us| Max Freq：| PWM max.333Hz
Connector：| 3P Dupont| Wire length：| 220mm
Servo Arm：| 25T| Operation Angle：| 140 Deg
Item：| Spec
Operating Voltage：| 7.4V
Dead Band：| 2u
Stall Current| 1.7A
Operating Speed(no load)：| 0.073sec/60°
Torque：| 4.9kg.cm
Stall Torque ：| 9kg.cm
OMPHOBBY M4 Max Mini Tail Servo
Model| 3515T| Operating Voltage：| 4.8V-8.4V
Working pulse length：| 500-1000us| Max Freq：| PWM max.560Hz
Connector：| 3P Dupont| Wire length：| 220mm
Servo Arm：| 5mm 25T| Operation Angle：| 140 Deg
Item：| Spec
Operating Voltage：| 7.4V
Dead Band：| 2u
Stall Current| 3.4A
Operating Speed(no load)：| 0.051sec/60°
Torque：| 4.5kg.cm
Stall Torque：| 9.5kg.cm
Weight| 43g
ESC 85A Specification
| Continuous/Peak current | 85A/120A |
|---|---|
| Input voltage | 3-6S Lipo HV |
| BEC | 6V/7.4V/8.4V*, 10A |
| Input/output wire | Black & Red 12AWG Silicon wire / Black 14AWG Silicon wire. |
| Size/Weight | 67x33x20mm / 66g |
Wire Connections
- Throttle signal/BEC output wire (Black, Red, White): Plugs into the receiver throttle channel. The white wire carries the throttle signal, the red wire and black wire carry the BEC voltage and ground.
- RPM signal wire (Yellow): Plug into the RPM input port. (If applicable).
Throttle calibration procedure
(Important: Please make the throttle calibration for the first time using
ESC!!!)
Accessories package
Zhuhai Edge Smart Drive Technology Co., Ltd
www.omphobby.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>