Philips Performance PN402BK Wireless Bluetooth Earbuds-Complete Features/User Guide

Philips Performance PN402BK Wireless Bluetooth Earbuds

Specifications

• MUSIC TIME: 7 hours
• TALK TIME: 7 hours
• STANDBY TIME: 160 hours
• CHARGING TIME: 2 hours
• BLUETOOTH VERSION: 5.0
• COMPATIBLE BLUETOOTH PROFILES: HFP (Hands-Free Profile-HFP), A2DP (Advanced Audio Distribution Profile), AVRCP (Audio Video Remote Control Profile)
• SUPPORTED AUDIO CODEC: SBC
• FREQUENCY RANGE: 2.402-2.480 GHz
• TRANSMITTER POWER: < 10 dBm
• OPERATING RANGE: Up to 10 meters (33 feet)

Introduction

These headphones have an IPX4 water resistance rating, which indicates they can withstand prolonged dampness. With Rapid Charge, you can add additional 2 hours of talk time to your phone in just 5 minutes. When a call comes in, the neckband vibrates, guaranteeing that you don’t miss it, even whether you’re engrossed in your music or have the earbuds around your neck. You’ll always have a clear, uninterrupted connection with our acoustic echo cancellation. The neckband is slim. Even if you wear it all day, it’s comfortable.

The sound is quite detailed. Clear midrange frequencies and deep bass are delivered by the 12. 2mm neodymium speakers, which are ideal for music and conversations. When you turn on Bluetooth, the headphones are ready to pair. They recall the last device they were paired with once they’ve been paired.

WHAT’S IN THE BOX

• Philips Bluetooth in-ear headphones Philips TAPN402

• Replaceable rubber ear caps x 2 pairs

• USB charging cable (for charging only)

• Audio cable with USB plug

• Quick start guide

• Other devices

A mobile phone or device (e.g. notebook, PDA, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the headphone.

OVERVIEW OF YOUR BLUETOOTH WIRELESS HEADPHONE

• (Power On / Off / Pairing)
• Micro USB charging slot
• Volume / Track control button
• LED indicator
• Microphone
• Charge the battery

NOTE

• Before you use your headphone for the first time, place the headphones in the charging case and charge the battery for 3 hours for optimum battery capacity and lifetime.
• Use only the original USB charging cable to avoid any damage.
• Finish your call before charging the headphone, as connecting the headphone for charging will power the headphone off.

CHARGING CASE

Connect the supplied USB charging cable to:

• The micro USB charging slot on the headphones and;
• The charger/USB port of a computer.
• LED turns red during charging and turns off when the headphones in fully charged.

PAIR THE HEADPHONES WITH YOUR MOBILE PHONE

Before you use the headphones with your mobile phone for the first time, pair it with a mobile phone. A successful pairing establishes a unique encrypted link between the headphones and mobile phone. The headphones store the last 8 devices in the memory. If you try to pair more than 8 devices, the earliest paired device is replaced by the new one.

1. Make sure that the headphones are fully charged and turned off.

2. Press and hold for 5 seconds until the blue and red LED flashes alternately.
   The headphone remains in pairing mode for 2 minutes.

3. Make sure that the mobile phone is turned on and its Bluetooth feature is activated.

4. Pair the headphones with the mobile phone. For detailed information, refer to the user manual of your mobile phone.

The following example shows you how to pair the headphones with your mobile phone.

1. Activate the Bluetooth feature of your mobile phone, select Philips PN402
2. Enter the headphone password “0000” (4 zeros) if prompted. For those mobile phones featuring Bluetooth 3.0 or higher, no need to enter a password.

CONNECT THE HEADPHONE TO YOUR BLUETOOTH DEVICE

1. Turn on your mobile phone/ Bluetooth device.
2. Press and hold the on/off button to turn the headphones on.

• The blue LED flashes.
• The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device.

NOTE

• If the headphones fail to connect to any Bluetooth device within range in 8 minutes, it will switch off automatically to save the battery life.

WIRED CONNECTION

You can also use the headphones with the audio cable provided. Make sure the headphones turned on before using the audio cable. Connect the supplied audio cable to the headphones and external audio device.

MANAGE YOUR CALLS AND MUSIC

ON/OFF

MUSIC CONTROL

OTHER HEADPHONES INDICATOR STATUS

DECLARATION OF CONFORMITY

Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com.

Disposal of your old product and battery

Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused.

This symbol on a product means that the product is covered by European Directive 2012/19/EU.  This symbol means that the product contains a built-in rechargeable battery covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an official collection point or a Philips service centre to have a professional remove the rechargeable battery.

Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

REMOVE THE INTEGRATED BATTERY

If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones.

• Make sure the headphone is disconnected from the charging case before removing the battery.

COMPLIANCE WITH EMF

This product complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

Frequently Asked Questions

• What is the procedure for pairing my Philips Bluetooth earbuds?
  Make sure the headset is completely charged before using it.
  Remove both headsets from the charging case; the headsets will immediately turn on, input the pairing model, and the Right and Left headsets will be connected.
  Turn on your Bluetooth device’s Bluetooth capability.
  Connect the headset to your Bluetooth-enabled device.

• When my Philips headphones are fully charged, how do I know?
  There will be a voice prompt (“Battery low.”) when the headset’s battery level is low (about 30-minute usage remains).
  The white LED illuminates when charging is taking place.
  The LED turns off when the charge is finished.

• What are your thoughts on Philips earbuds?
  Slowly open your mouth to loosen your jaw somewhat.
  Tilt your head one way or the other (say, to your right).
  Slowly insert the tip of the earbud into your ear canal on your left ear.
  Play music using your earphones.

• What is the procedure for resetting my Philips earbuds?
  Turn off your Bluetooth device’s Bluetooth function. Return both earpieces to their charging cases. The white led in both earpieces’ flashes. Press and hold the function buttons on both earpieces for 4 seconds, or until the white led on the earpiece flashes twice.

• What is the procedure for turning on my Philips wireless earbuds?
  Press and hold the multi-function button on both earpieces for 3 seconds to turn on your Philips SHB4385 headphones. Note: If no Bluetooth connection is made after 15 minutes, your headphones will power off automatically.

• What’s the deal with my Philips Bluetooth headphones not connecting?
  Try the following if you’re having trouble pairing or connecting your Philips Bluetooth headphones to your smartphone. Check to see if the headset and smartphone are both fully charged. Remove the headset from the Bluetooth device list on your smartphone. Reset the headphone’s volume.

• How can you tell whether your Bluetooth headphones are fully charged?
  When the battery is charging, the indicator light will turn on. The light may take up to one minute to turn on. The indication light will turn off when the headset’s battery is fully charged (approximately 2-3 hours).

• What is the best way to charge my Philips headphones?
  Connect the included USB charging cable to the headphones’ micro USB charging slot and a computer’s charger/USB port. When the headphones are fully charged, the LED becomes white and then shuts off.

• What is the best way to charge my Philips Bluetooth speaker?
  A built-in rechargeable battery powers the speaker. Charge the built-in battery completely before using. The micro USB port is only for charging. Connect the USB connection to a USB port on your computer and the micro USB port on the speaker.

• How long does it take to charge Philips earbuds?
  The earphones only take two hours to charge completely, but the case takes three hours. When the earbuds run out of juice, simply store them in the case and they’ll be ready to use in two hours. These earphones come with a 3350 mAh portable charging case that also serves as a power bank.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>