VANTOP Performance V700 Native 1920x1080p Projector User Manual

June 5, 2024
VanTop

vantop logo

VANTOP Performance V700 Native 1920x1080p Projector User Manual

VANTOP Performance V700 Native 1920x1080p Projector User Manual
PRODUCT

Thank you for choosing VANKYO.
If you have any questions or need any help, please feel free to contact us at support@ivankyo.com

WHATS INCLUDED PRODUCT OVERVIEW

PRODUCT OVERVIEW 02 POWER ON OFF

images Adjustment

  1. Rotate rectangular. the Keystone Correction Ring to correct the vertical keystone distortion until the image Is evenly rectangular.
    IMAGE ADJUSTMENT 01

  2. Press the focus buttons an the remote to sharpen the Image focus until the blurry Image becomes clearIMAGE ADJUSTMENT 02
    TIP: You can also press and hold the OK button on the projector to enter the focus interface, then press the UP and Down buttons on It to adjust the focus.

  3. Go to Homepage!” Setting> Picture Setting> Image Scaling to enlarge or reduce the image size.
    IMAGE ADJUSTMENT 03

Homepage Overview

The projector will enter the homepage after you power iton and set the language for the first-time use. Pres,; the Down button to show more options as below.
HOMEPAGE OVERVIEW

  • submenu for input, source multimedia
  • input source HDMI 1,input source HDMI 2
  • Bluetooth Connection Status /Bluetooth Setup
  • USB Disk Status ,WIFI Connection Status /WIFI Setup
  • Setting, input Source-Multiscreen

PROJECTDR CONNECTION AND INPUT SOURCE
Connect your device to the projector correctly, then press @) on the remote to access the page below and select the right input source, or directly select the right input source on the homepage.

USB Connection

USB CONNECTION 01

  • Photo Format supported
  • Audio Format Supported
  • Video Format Supported
  • Text Format Supported
  • BM P/JPG/PNG/GIF/JPEG
  • Af:.3//>,K,/M P2/M P3/PCM/FLAC/WMA
  • AVI/MP4/MKII/FLV/MOV/RMVB/3GP/MPEG2/l-l 264/XIIID TXT

Screen Mirroring

SCREEN MIRRORING

HDMI Connection

This option is for connecting a device with an H DMI output port.
HDMI CONNECTIONHDMI”, the HDMI” logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Wired Speaker and Headphones Connection
This option is not required to select any input source.
SPEAKER AND HEADPHONE CONNECTION
Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

SCREEN MIRRORING

For iOS System

Screen Mirroring via Router’s WIFI

  1. Go to Homepage Input Source, select MULTISCEEN as the input source to enter the CAST interface.

  1. Select Cast Settings> WIFI Setting to search and connect the projector to your router’s WIFI.
    SCREEN MIRRIRING 02 Tip: You can also go to the homepage,, and select the icon “if, or go to setting > Other Setting > WIFI -setting to canned the projector to your router’s WIFI.

  2.  Enter WIFI settings of your iOS device and connect it to the same router’s WIFI.

  3. Return the screen back to CAST interface, then select iOS Cast to enter the Fi. Following interface.
    SCREEN MIRRIRING 03

  4. Activate Screen Mirroring/Airplay Mirroring In the Control Center of your iOS device and search fort he projector.

  5. Select V700W-XXXX-(icast) from the searching list to connect.
    SCREEN MIRRIRING 04

  6. The contents on your i05 device will be mirrored to the wall/screen after a successful connection

Tip: To activate screen mirroring function of your MacBook, please follow the below steps,

  • Click Control Center icon in the menu bar al the top of the Mac screen
  • Click Screen Mirroring to search for the projector.
  • Select V700W-XXXX-(icast) to connect.

TIP

Screen Mirroring via a Lightning Cable

  1. Go to Homepage> Input Source, select MULTISCEEN as the input source to enter the CAST interface.

  2. Select IOS cable Cast to enter the following Interface.
    SCREEN MIRRORING VIA A LIGHTING CABLE

  3. Connect your iOS mobile device to the USB Port l of the projector using the ORIGINAL lightning cable. 0

  4. Select Trust in the pop-up window of Trust This Computer.

  5. The contents on your iOS device will be mirror to the wall/screen after a successful connection. For Android System

 FOR ANDROID SYSTEM

To activate this function, please make sure your Android device supports Multi-screen/Wireless display, Names may differ from one Android device to another.

  1. Tum on the WIFI switch on your Android device
    Note: Successful WIFI connection Is not a must. but please make sure the WIFI switch on your Android device Is ON.

  2. Go to Homepage > Input Source, select Multiscreen as the input source In enter the CAST interface.

  3. Select Miracast to enter the following interface.
    FOR ANDROID SYSTEM

  4. Activate Multi screen function on your Android device and search for the projector,

  5. Select Performance V700W-JOO(l( from the searching list to conned

  6. The content on your Android device will be mirrored to the wall/screen after a successful connection.

For Windows 10 System

To activate this function, your Windows lO device must support the Miracast features.

  1. Turn on the WIFl switch on your Windows IO device.
    Note: Successful WiFi connection is not a must, but please make sure the WiFi switch on your Windows 10 device is ON.

  2. Go to Homepage> Input Source, select MUL71SCEEN as the lnput source to enter the CAST Interface.

  3.  Select Windows Cast to enter the following interface.

  4. FOR ANDROID SYSTEMPress the “Windows Logo+ P” key combination on your keyboard to ‘enter PRO.JECT interface, then select “Connect to a wireless display” to search the projector.

  5. Select Performance V700W-)OO()(from the searching list to connect.

  6. The contents on your Windows 10 device will be mirrored to the wall/screen after a successful connection.

Notes:

  1. The fluency of screen mirroring will be affect«! by the network environment. A bandwidth of lOOM bitor more is recommended when using screen mirroring.
  2. Make sure your mobile device Is close to the projector when using wireless connection. A distance within 3ft is recommended.
  3.  Some mobile device.,, may not support screen mirroring due In the compatibility.
  4. Due to copyright restrictions of Hulu, Netflix,, and similar services, the contents on these streaming services CAN NOT the mirrored or cast.
  5. If the projected image Freezes, please reboot the projector, then go to Homepage , Input Source. MULTISCEEN > Cast Settings > Restore Factory Default and selected Confirm to do a reset on screen mirroring module.

SCREEN CASTING

  1. Connect your mobile device and the projector to the same router WIFI.

  2. Go to Homepage> Input Source, select MUL71SCREEN as the input source to enter the CAST interface.

  3.  Select DLNA to enter the following interface.
    SCREEN CASTING

  4. Launch a video player APP on your mobile device and select a video to play.

  5. Tap to search for the projector.

  6.  Select Performance V700W-JO(XXX. (dlna) to connect.

  7. The contents on your device will be cast to the wall/screen.
    NOTE: When you cast a video from your mobile device, the video will only be displayed on the projected screen and you can still use your mobile device without interrupting the video or showing any of your other content.

BLUETOOTH CONNECTION

Use as A Bluetooth Speaker
You can connect your mobile device with this projector via Bluetooth connection and use it as a Bluetooth Speaker.
Step l: Press the power button to enter the interface below, then press > to change to amplifier mode.
BLUETOOTH CONNECTION TIP: panel off means that the projection screen is off when the projector Is playing audio; panel on means that the projection screen is on when the projector is playing audio.
Step 2: Go to the Bluetooth setting of your mobile device to turn on the Bluetooth, then search for V700w from the searching list to pair the mobile device with the projector.
BLUETOOTH CONNECTION STEP

STEP 3: Press the back button to exit this mode.

Connect to An External Bluetooth Speaker

Except for the wired 3.5mm audio output port connection, you can also connect a Bluetooth speaker or a pair of Bluetooth headphones to this projector vide the Bluetooth connection.
Step 1: Turn on your Bluetooth device and make it ready for a Bluetooth connection_
Step 2: Go to the homepage and select the icon :t , or go to Setting> other Setting > Bluetooth to enter the interface below.

BLUETOOTH CONNECTION STEP 02

Step 3: Press the or Right buttons to turn on or off the Bluetooth of the projector.

TIP: It takes about 3 seconds to tum off the Bluetooth; please wait patiently.

Step 4: Select Find Bluetooth and press OK to start searching fur available Bluetooth devices.
Step 5: Select your Bluetooth device and pair it with the projector.

SETTINGS
The settings include Picture Setting, System Setting and Other Setting.

Picture Setting:
Flip the Image, adjust the Image size/Image color/aspect ratio/picture mode.
System Setting:
Set the language of the projector, update the software of the projector with a USB disk, restore the projector to factory settings and set the lime duration for the projector to power off automatically.
Other Setting:
Set the lime duration for a pop-up window to disappear, conned the projector WIFI and Bluetooth.

PROJECTION DISTANCE & SIZE

PROJECTION DISTANCE SIZE

The recommended projection distance varies with different projection contents. Please adjust the distance between the wall screen and the projector as needed.

  • Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

specificationUnit Dimension          290″220″93mm (Ll.4″8.7″3. 7 inch)               Unit Net Weight                2.23kg{4. 921bs)

TROUBLESHOOTING GUIDE


  • The contents from Hulu, Netflix, and similar services can not be mirror or cast.
    Due to the copyright restriction from Hulu, Netflix, and similar services, the contents CAN N07 be mirror or cast

  • What should I do if I want to watch the content from Hulu, Netflix, and similar service. via the projector7
    Please prepare a Fire TV stick, Roku stick or Chromecast” [not included), then connection the projector.

  • Blurry Image
    Adjust focus ring/keystone.
    Projector and screen/wall must be in effective distance,

  • Remote Unresponsive
    Make sure remote points at IR receiver directly.
    Do not cover id receiver
    Try a new pair of AAA batteries.

  • Upside Down Images
    Go to Homepage> Setting> Picture Setting> Projection Mode to fiip the projection image.

Factory Reset

  • Reset the screen mirroring module to the factory settings
    Go to Homepage> Input Source> MULTISCEEN > Cast Settings> Re>tore Factory Default, then select Confirm to do a reset

  • Reset the projector the factory settings
    Go to Homepage> Setting> System Setting> Restore Factory Default or press @ on the remote in any interface to access system Setting and enter Restore Factory Default. then select Confirm to reset the projector to default settings.

FCC Statement
Any Changes or modifications not expressly approved by the party responsible fur compliance could 110id the user’s authority In operate the equipment. This device com plies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1.  This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to mm ply with the limits for a Class B digital device, pursuant to part l5of the FCC rules. These limits are designed to p=ide reasonable protection against harmful interferent in a residential Installation. This equipment generates, uses and can radiate radio frequency energy and, IF not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferent a to radio or television reception, which can be determined by turning the equipment off and on, the user is enraged to try to correct the Interference by one or more of the following measures:

  • Reorient or reload<a the recement antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experience-d radio/JV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals