VANTOP DC-V100 Dual Dash Cam User Manual
- June 10, 2024
- VanTop
Table of Contents
VANTOP DC-V100 Dual Dash Cam
Please read this user manual carefully before using it and keep it well for future reference.
NOTICE
- This unit should be connected to the car charger so that it would be constantly powered. No built-in lithium battery, will shut down when power is unplugged, does not support charging.
- Please use the original car charger provided.
- This unit is intended to be mounted on the front windshield. It must not be placed in a position where it may affect the deployment of airbags, and must not obstruct the driver’s view.
- Make sure the lens of the camera is dean and not blocked.
- We recommend that you perform a pre-installation test to ensure that this product is in good condition.
- This product must be securely mounted prior to driving the vehicle.
- DO NOT leave the product where the temperature may exceed 70° C (160° F) for an extended period.
- Free original 32G SD card has been pre-installed into the VlOO dash cam.(Max. support 256G) The formatting operation has been carried out, and it can be used directly after being connected to the power supply for the first time. If you need to replace the SD carcl, we recommend using a well-known brand {such as Samsung) of class 10, U3 card speed micro sd card. Please remember to format the new SD card before your first use.
WHAT’S IN THE BOX
-
Dash Camera
-
Car Charger (11.5ft}
-
User Manual
-
Electrostatic Sticker
-
Spare 3M Adhesive Pad
-
Easy Pry Tool
KNOW YOUR DASH CAMERA
Dash Camera
Note:
Function of the Power Button
- If you insert an unformatted card, the camera will prompt you of formatting it You can press this button once to format it.
- Press and hold the power button for 4 seconds until you hear a beep from the camera to power off the dash camera.
- Press and hold the power button for 8 seconds until you hear another 2 beeps from the camera to restore the camera to factory settings.
- Under video recording status, short press is to lock the video.
INSTALLATION INSTRUCTIONS
Step 1: Stop the engine of your vehicle, find an ideal location on the front windshield, then clean the front windshield and attach the Electrostatic Sticker to it.
Step 2: Peel off the 3M Adhesive Pad on the camera and attach it onto the Electrostatic Sticker.
Step 3: Connect the Micro USB connector of the Car Charger to the Micro USB Port on the camera, and connect another end to the Cigarette Lighter Receptacle in the vehicle.
Step 4: Start the engine of your vehicle to check whether the dash camera is installed correctly and works well.
Step 5: 32G SD card has been pre-installed into the V100 dash cam. If you need to replace the SD card, please remember to format the new SD card before your first use.
Tips:
-
If you insert an unformatted card, the camera will prompt you of formatting it Please press the Power Button once to format it There are also another two options to format the card.
Option 1: After connecting the your mobile device to the camera, install the memory card into the dash camera and go to the App > Camera Settings > Format to format the card. Option 2: Install the memory card into a card reader, then connect it to the computer to format it to FAT32. -
Due to the data rate of the video being recorded, a reputable Class 10 or a higher speed memory card must be used.
-
When the card you inserted can’t be read or has issue, the camera will prompt you of formatting. If the formatting fails, please replace the old card with a new one.
OPERATION GUIDE VIA THE APP
Connect the Dash Camera with the App
Step 1: Scan the QR code below or go to Google Play/App Store to search for ‘VeeCar” to download and install the App on your mobile device.
Step 2: Make sure the dash camera is powered on and the distance between your mobile device and the camera is within 5 meters.
Step 3: ( Launch the “VeeCar” App and grant the permissions required by the App (Option to skip the login or registration process first), then tap Add Camera to check the wizard and start connecting. )
Step 4: Go to the Settings > WL.AN of your mobile device to search for WiFi of 11V100_ ……. and enter the password 12345678 to connect to the camera’s hotspot.
Tips:
After connecting to the camera’s WiFi, if your mobile device pops up a window
asking ‘”The camera’s WiFi can’t access the Internet, are you sure to continue
the connection?’, please select “Yes’. Selecting ‘No” will disconnect the
camera’s WiFi.
Step 5: Go back to the App to wait for the connection, then tap Access Camera to enter the homepage.
Tips:
When you disconnect the camera’s wifi and exit the APP, the camera will
continue to record, and you will hear a voice prompting· wifi disconnected·.
Overview of the App
Homepage
Camera File
Tap Camera File on the homepage to check all the videos and photos. You can also delete or download files here.
- Loop: Standard Videos Snapshot: Captures Photos Locked: Locked Videos Parking: Video Recorded when Parking (An extra hardwire kit is needed)
- Tap Select on the upper right corner to select the file(s) to download into your mobile deivce or delete the file(s). After dowloading the file(s), then you can edit or directly share it(them) to socia media.
Settings
Tap Camera Settings on the homepage to check and change the settings of your dash camera.
Record Audio
Turn on or turn off the audio when recording videos.
Speaker Volume
Set the volume of the speaker for the camera. You can choose from Mute, Low, Medium, and High.
Resolution
Change the resolution of the dash camera. Options include 2.5K@30fps, and 1080P@30fps.
Video Length
Change the recording time of each video. The recording time is set to be 1 minute by default. You can choose from 1 minute, 2 minutes. and 3 minutes.
Time Stamp
Show or hide the date and time watermark on the recorded videos and captured photos.
Frequency
Tap to switch the frequency between 60HZ and 50 Hz .
G-Sensor
Set the different G-sensor sensitivity of collision detection when driving. You can select from Low, Medium, High, and Off as needed. If you select High(low), the camera would automatically lock the current video when your car encounters a minor(severe) collision. If the G-sensor is triggered to lock the video, the machine will make a voice announcement of ”The video is locked”. Indicating the camera is locking the current video. This video will not be overwritten.
Time-lapse
Set the frame rate of the video. After enabling this option, every 30 minutes of videos will be compressed to 1 minute and then be saved in the memory card.
Note:
An extra hardwire kit(not included) is required for using this function.
Please contact us for more information.
Wi-Fi Name
Check and change the camera’s WiFi name.
Wi-Fi Password
Check and change the camera’s WiFi password.
Firmware Version
Check the firmware version of the dash camera.
Format
Format the memory card.
Default
Restore the dash camera to the factory settings. When resetting, the dash camera will be restarted.
SPECIFICATIONS
Chipset | SA220C |
---|---|
Sensor | SC2336 |
Speaker | 1W |
Memory Card | Support up to 256GB (32G sd card included) |
Connection | Mirco usb Port and Memory Card Slot |
Resolution(Front Camera) | 2560•144op |
Video Format | .TS |
Photo Format | JPG |
Storage Temperature | -30°C- +75°C |
Working Temperature | -10°c- +65°C |
WARRANTY AND CUSTOMER SERVICE
- We provide a 12-month warranty for product quality issues and 45 days money back & return guarantee for all products.
- If you have any questions or need any help, please feel free to contactus in time. We offer 7*24H high-priority customer service response via Amazon Message.
TROUBLESHOOTING GUIDE
Q1. The dash camera can’t be used normally after the new sd card is
inserted, and it prompts that the card needs to be formatted.
To ensure normal video recording with the dash camera, it needs to format the
memory card first and check its speed before using it
Option 1: Press the power button as soon as you hear the voice prompt for
formatting the memory card.
Option 2: Go to the App > Settings > Format to format the memory card.
Q2. Too loud, too low, or repeated voice prompts.
Go to the App > Settings > Speaker Volume to mute the speaker or adjust the
volume as needed.
Q3. My mobile device can’t connect to the dash camera’s WiFi.
Go to the WLAN settings of your mobile device and find the WiFi of V100-~ ….
~. Then, input the right password 12345678. After a successful connection, the
WiFi icon on the display will turn green. Upon the success of the first
connection, the mobile phone will automatically connect for future use.
04. There is no sound when playing the recorded videos.
If the microphone icon on the display has been disenabled , the video has been
recorded without sound. To turn on the microphone, please go to the App >
Settings> Record Audio.
If the microphone icon on the display is normal , please go to App > Settings
Default and restore the dash camera to factory settings. (It’s normal for preview video to be without audio.)
Note:
In case the problem persists after resetting, please contact us directly.
Q5. The machine sometimes sends out a voice reminder of ·The video is
locked”, is it normal?
The voice reminder indicates that the current video is being locked and
recorded. It is a normal situation that the G-snsor function is triggered due
to sudden braking, collision or bad road conditions during the driving
process. You can go to App > Settings > G-sensor to adjust the sensitivity
level or disable this function.
Q6. Why can’t I see the live preview on the App?
- Make sure your mobile device has connected to the WiFi of the dash camera.
- The distance between your mobile device and the dash camera can’t exceed 5 meters.
Q7. Why can’t my mobile device receive messages via 4G/5G cellular data
after it connects to the WiFi of the dash camera?
If your mobile device is a single-channel phone, it will not be able to
receive 4G/5G information after connecting to the camera’s WiFi. However, it
will be able to receive calls.
QS. How to mute the sound of the dash camera?
After connecting to the camera’s WiFi, please go to App > Settings > Speaker
Volume to mute the speaker.
Q9. Can I use the dash camera without a power source?
No, you can’t. Since this camera has no battery built-in, it needs to be
powered while working.
Q10. Can I use the dash camera without my phone?
Yes, you can. Once you set up the dash camera with the App for the first time,
as soon as the dash camera is connected to the power supply in the future, it
will begin working.
011. How can I activate the Parking Mode function of the dash camera?
A hardwire kit is required to use this function. After the Hardwire Kit
installation and wiring are completed correctly, the machine has activated the
“Time-laspe” function by default, and the dash camera can guarantee 24H
continuous time-laspe recording to ensure the safety of your car.
012. When I cannot connect to the camera’s WiFi, my mobile phone can’t
recognize the WiFi, the camera’s WiFi is not listed, I can’t format the card,
and I can’t find the unconnected device, what should I do?
Please press and hold the power button for 10s until you hear two beeps to
restore the dash camera to the factory settings. After resetting, please
reconnect your mobile device to the camera’s WiFi. If the issue still exists,
please directly contact us.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT lYPE.
DISPOSE OF USED BATTERJES ACCORDING TO THE INSTRUCTIONS
⎓ The symbol indicates DC voltage
RECYCLING
This product bears the selective sorting symbol for Wast.e electrical and electronic equipment (WEE8.This means that this product must be handled pursuant to European directive2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/1V technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
ISED Statement
English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 0cm between the radiator & your body.