FiiTii HiFiAir ANC Wireless Earbuds User Guide
- June 5, 2024
- FiiTii
Table of Contents
Operation guide
Pairing
Take out earbuds, wait for flashing on indicators on both sides after
automatically self-connection completes.
Pair FiiTii_HiFiAir with your device on Bluetooth.
Touch control
| L| R
---|---|---
Double-tap
| Answer / End call|
Double-tap
| Play / Pause music
Press for 2 sec
| Mild Noise cancelling
Transparency mode
Strong noise cancelling
Tap 5 times
| On / Off Low latency mode
Tap
| Volume down| |
Triple-tap
| Previous track
Tap
| Volume up| |
Triple-tap
| Next track
PS : The HiFiAir will automatically shut off if not be connected to a device after 10 minutes.
How to reset
- Under disconnected, tap 5 times separately to power off.
- Press for 10 sec separately to reset settings after you hear the notice.
PS: If single side doesn’t work or earbuds are under abnormal condition, please follow the steps to figure out whether earbuds work as ever.
The LED on the charging case
The battery indicator will light up for 3sec when earbuds are inserted into the charging case.
Full 70% remaining
30% remaining Please Charge
Warning and recommendation
Please read this operation guide in details for product safety and correct usage.
(1) Loud sounds may cause hearing loss. Maintain a safely listening volume and
duration. Consult your physician to understand the appropriate volume and
duration to avoid hearing loss.
(2) Please use earbuds and their different functions under proper and safe
environment to avoid safety issues.
(3) For better and stable connection, please don’t use the earbuds under heavy
electromagnetic interference or signal interference environment.
(4) Do not use this product while operating a vehicle or heavy machinery.
(5) Keep out of reach of children.
(6) Not rated for use in dishwasher, laundry machine, or other cleaning
devices.
(7) If ear pain or discomfort resulted from the use of this product, please
stop using and it immediately consult a physician.
(8) Do not store at temperatures below -15 degree C (5 degrees F) or above 55
degrees C (131 degrees F).
(9) Please clean the charging touch point and speaker driver net regularly to
avoid charging problem, diminishing audio caused by grime and earwax build up.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
FCC ID: 2ASHS-HIFIAIR
DESIGNED AND MADE BY
Mifo Technology Co.,Ltd.
support©fiitii.com
support@mifo.hk
www.fiitii.com
PN: HASOO1