PHILIPS Pro Wired Earbuds, Headphones with Mic, Powerful Bass, Lightweight-Complete Features/User Guide

PHILIPS Pro Wired Earbuds, Headphones with Mic, Powerful Bass,

Lightweight

Specifications

• BRAND: Philips
• COLOR: Black
• CONNECTIVITY TECHNOLOGY: Wired
• MODEL NAME: B07TDS4SG1
• FORM FACTOR: In-Ear
• PACKAGE DIMENSIONS: 6.81 x 3.78 x 1.06 inches
• ITEM WEIGHT: 1.6 ounces
• BATTERIES: 2 Lithium-Ion batteries

Introduction

High-resolution audio captures the music in its most natural state. High- resolution audio captures the music in its most natural state. High-Resolution Audio delivers superior audio quality, more authentically replicating original studio master recordings than 16bit/44 1kHz CD formats. High-Resolution Audio is the finest sound companion for music lovers because of its uncompromising quality. Fidelio headphones meet the strict requirements for the Hi-Res Audio quality seal. The smooth extended high frequencies of the Fidelio headphone range let you gain more from your music, whether you’re listening to your Hi- Res collection or a more traditional audio source.

HOW TO RESET

Turn off your Bluetooth device’s Bluetooth function. Return both earpieces to their charging cases. The white led in both earpieces’ flashes. Press and hold the function buttons on both earpieces for 4 seconds, or until the white led on the earpiece flashes twice.

HOW TO PAIR

Make sure the headset’s earpieces are both turned off. Press and hold the multi-function button on both earpieces for 3 seconds. The white LED in both earpieces flashes three times before changing to blue. Both earpieces are now turned on and connected to one another.

HOW TO USE

• Slowly open your mouth to loosen your jaw somewhat.
• Tilt your head one way or the other (say, to your right).
• Slowly insert the tip of the earbud into your ear canal on your left ear.
• Play music through your earphones.

HOW TO TURN ON

Press and hold the multi-function button on both earpieces for 3 seconds to turn on your Philips SHB4385 headphones. Note: If no Bluetooth connection is made after 15 minutes, your headphones will power off automatically.

HOW TO WEAR THE EARBUDS

• Slowly open your mouth to loosen your jaw somewhat.
• Tilt your head to one side (say, to the right) and slowly insert the earbud tip into your left ear canal.
• Play music using your earphones.
• Adjust the earbud’s position until you hear a more focused sound.

HOW TO FIX

Try the following if you’re having trouble pairing or connecting your Philips Bluetooth headphones to your smartphone.

• Check to see if the headset and smartphone are both fully charged.
• Remove the headset from the Bluetooth device list on your smartphone.
• Reset the headphone’s volume.

Frequently Asked Questions

• What is the best way to tell if my Philips earphones are charging?
  One end of the USB cable should be plugged into the charging case, while the other should be plugged into the power source. • The blue LED light on the front panel turns on when the charging case is fully charged, indicating that the charging process is complete. The charging process is confirmed by the presence of a white LED light on the earpieces.

• How long does it take to charge Philips earbuds?
  The earphones only take two hours to charge completely, but the case takes three hours. When the earbuds run out of juice, simply store them in the case and they’ll be ready to use in two hours. The portable charging case that comes with these earbuds has a capacity of 3350 mAh.

• Why is only one side of my headphone working?
  Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal.

• What’s the deal with my Philips Bluetooth headphones not connecting?
  Try the following if you’re having trouble pairing or connecting your Philips Bluetooth headphones to your smartphone. Check to see if the headset and smartphone are both fully charged. Remove the headset from the Bluetooth device list on your smartphone. Reset the headphone’s volume.

• What is the procedure for turning off my Philips Bluetooth earbuds?
  Operation of the Task Button Put your headphones on. Controls for on/off, music, and phone calls Hold the button down for 2 seconds. Remove the headphones. Controls for on/off, music, and phone calls Hold the button down for 4 seconds. The white LED is turned on and off.

• What is the best way to connect my Philips earbuds to my iPhone?
  Go to the Bluetooth menu on the phone and look for the headset.
  Once the headset has been detected, select it.
  Enter the passcode “0000” if prompted (4 zeros)
  The headset and phone are now connected. It is important to note that the cell phone must be Bluetooth enabled (i.e., equipped with the Bluetooth feature).

• What is the best way to charge Philips headphones?
  Connect the included USB charging cable to the headphones’ micro-USB charging slot and a computer’s charger/USB port. When the headphones are fully charged, the LED becomes white and then shuts off.

• When it comes to Philips headphones, how long do they last?
  With a single charge, you may listen to music for up to 4 hours. You can listen to music on the wireless headphones for an additional 8 hours if the charging case is fully charged.

• What’s wrong with my left wired earbud?
  The Earphone Cable should be tested and repaired. When your left earphone quits working, the first thing you should do is test the wire. Insert the earphone plug into your smartphone and perform numerous bends with your fingers to discover a likely cable break spot.

• What is the best way to connect both earbuds at the same time?
  Double-click each earpiece at the same time, make sure your phone’s Bluetooth is switched off, and they should link. Wait a few seconds, then turn your Bluetooth back on.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>