Rienok S1 Mini Portable Speaker User Manual

: June 5, 2024
: Rienok

Table of Contents

Rienok S1 Mini Portable Speaker
PACKAGE DETAILS
FUNCTION DESCRIPTION
OPERATION
INTERFACE CONNECTION
BLUETOOTH CONNECTING
TRUE WIRELESS STEREO
FCC Compliance Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Rienok S1 Mini Portable Speaker

PACKAGE DETAILS

Rienok-S1-Mini-Portable-Speaker-1

Bluetooth Version 5.3
Micro SD Card Maximum support 32GB TF card
Charging Voltage 5VlA
Technical Trumpet 50mm 2
Output 30WTHD1%
Transmission Frequency 2.4G~2.48G
File Formats MP3, WMA, WAV, FLAC, APE

FUNCTION DESCRIPTION

Rienok-S1-Mini-Portable-Speaker-3

OPERATION

Rienok-S1-Mini-Portable-Speaker-4

INTERFACE CONNECTION

Rienok-S1-Mini-Portable-Speaker-5

Data Access
Insert SD card when power off, use data cable connect to PC, short press Power button to enter SD card mode, then you can cope music files to Micro SD card.

Battery Level:
Double click Power button If the RGB light is green for 2 seconds, indicates the battery power is more than 65%, if the RGB light is orange, indicates 30-65% battery power, if the light is red, indicates the power is less than 30%, it need to be charged.

BLUETOOTH CONNECTING

Power on(long press Power button for 2 seconds, Step O the speaker is on) the Bluetooth indicator will flash, waiting for pairing.
Go to your device’s Bluetooth page, fond and Step 8 connect ” Rienok Sl mini”, the Bluetooth indicator will stay on when connected.
Play your musics. Step O Tip: The Bluetooth speaker will automatically connect your device next time

TRUE WIRELESS STEREO

True Wireless Stereo Connection
Turn on two Bluetooth speakers, and disconnect the previous Bluetooth device, both speakers are under disconnect enter status, the choose True Wireless of them Stereo and mode When at the same prompt time. the tone is When heard you hear again, a the prompt pairing tone, is successful. two speakers

Connect to Bluetooth Device
Turn on your device’s Bluetooth, find and connect” Rienok S1 mini”, when you hear a prompt tone, the connection succeeded.

Disconnect True Wireless Stereo
Choose one of speaker and press”+” and “-” at the same time, When you hear a prompt tone, the True Wireless Stereo is disconnected.

Tips:

When you use the True Wireless Stereo function, the first speaker you press”+'”‘-“, is the main speaker(left channel), the other one is following speaker (right channel)
Only support two Rienok Sl mini speakers under True Wireless Stereo connection.
They will keep the previous main/follow relationship and reconnect the True Wireless Stereo next time.
Once True Wireless Stereo is connected, the following speaker’s LED will stay on, the main speaker’s LED indicates play, pause, and the status of the Bluetooth connection.
Once True Wireless Stereo is connected, operate one of them, the other one will have a synchronous operation.

FCC Compliance Statement

Operation is subject to the following three conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.
This device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

AFTER-SALES SERVICE
Should you have any questions during use, please contact us via the email provided below.we will provide you the most satisfying solution and service.