Lesenz LZ Alert UV Disinfection Lamp Wireless Charger Instruction Manual

Lesenz LZ Alert UV Disinfection Lamp Wireless Charger

Function Buttons

Functions

Power Connection

1. 1lug the USB-A end of the cable into the power adapter while plugging the Type-C end into the product.
2. The product will be ready and stand by after all indicators are on.

Wireless Charging

1. Output: 10W
2. Indicator Display: Power connection successful – blue light flashes once

• Standby – light off
• Charging – blue light on
• Charged – light off
• FOD – blue light flashes continuously

Alarm Clock Functions

1. Four Buttons: Alarm, +, -, Light.

Time System Setting

• Double click the Alarm button to set up the 12-hour time system and 24-hour time system. AM and PM will display while the 12-hour time system is set.

Time Setting

1. Click the Alarm button once to enter the minute setting, and adjust the value with +/-;
2. Click the Alarm button once after the minute setting, to enter the hour setting, adjust the value with +/-;
3. Click the Alarm button a third time to finish the time setting.

Alarm Setting

1. Press “+” 3 seconds to activate or deactivate Alarm 1; Press “-” 3 seconds to activate or deactivate Alarm 2. The alarm indicator is on while the Alarm is activated;
2. While activated, press the Alarm button 3 seconds to enter the alarm minute setting, adjust the value with +/-;
3. Click the Alarm button once after the alarm minute setting, to enter the alarm hour setting, adjust the value with +/-;
4. Click the Alarm button a third time to finish the alarm time setting;
5. The alarm bell rings 3 minutes before automatic switch-off while no operation.
6. Touch any button to enter Sleep Mode when the bell rings. Bell will ring 3 more times after 5 minutes. The indicator flashes and the Alarm button is out of function during the Sleepy Mode. If a time setting is needed, please long press “+” to stop alarm 1 or long-press “-” to stop alarm 2. All buttons will function normally;
7. Time display brightness is automatically adjusted by 3 grades. Max brightness during 7 am-5:59 pm. Mid brightness from 6 pm to 12 am. Min brightness during 12am-6:59am;
8. Time display brightness can also be adjusted manually to 3 grades (Min/Mid/Max). “+” and “-” can be used to adjust display brightness manually. The default grade is maxed brightness when power is connected. Single click “-” too dark the display one grade.
9. The display brightness goes dark for the last grade and goes bright automatically at 7 am the next day. All manual adjustments will be synchronized to automatic adjustments.

UV Disinfection Lamp Setting

1. Click the “LAMP” button once to turn on or off the UV disinfection lamp.
2. Click to turn on the UV lamp, the alarm will sound for 5 seconds after the UV lamp counts down for 1 minute;
3. Press and hold the “LAMP” button for 3 seconds to turn on the UV disinfection lamp, the UV lamp will work continuously;

Support the function of Hall element

• when the clock body and the base magnet are closed, the UV lamp works;
• when the clock body and the base magnet are separated, regardless of whether the disinfection command is completed, the UV lamp needs to stop working immediately, the countdown ends and the light indicator turns off;

Anti-mistouch “Setup” button design

• when the clock body and the base magnet are separated, all the buttons have no setup function in the first 30 seconds, and the function is restored after 30 seconds;
• when the clock body and the base magnet are closed, other buttons except the “Lamp” button do not function for 3 seconds, and the function is restored after 3 seconds.

Eco-power function

1. The button cell inside is only for time keeping.
2. All functions are out during power disconnection. Functions are restored when power is connected.

Note

1. Attention: In order to function alarm, wireless charging, UV light, and USB output altogether, power shall be connected by a QC2.0 or QC3.0 adapter. If connected by a 5V adapter, only wireless charging and alarm can work together.
2. Do not squeeze or collide.
3. Do not disassemble or put into the fire, or water, to avoid short-circuit leakage.
4. Do not use wireless chargers in severe high temperatures, humidity, or corrosive environments to avoid leakage of damaged circuits.
5. Do not place too close to magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips to avoid magnetic card failure.
6. Keep more than 20cm between the implanted medical device (pacemaker, implantable cochlea, etc.) and the wireless charger to avoid potential disruption to medical devices.
7. Keep children from the product in case they play with the wireless charger as a toy to avoid accidents.
8. Keep the wireless charger and receiver device away from water and other liquids.
9. To clean the charger, make sure the power supply is disconnected.
10. Usage temperature: 0-45℃.
11. Usage humidity: 20-85% (40℃)

• The pictures in this manual are all illustrations. The final product is subject to fact.
• Inside package: alarm charger, charging cable, manual.
• the power adapter is not included. Please purchase otherwise or use the phone’s original adapter.

Specification

• Input: 5V/2A, 9V/2A
• Output power: 10W (MAX)
• Charging efficiency: 73%
• Charging distance: ≤8mm
• Frequency: 110-205KHz
• Size: 145x116x73mm

Applicable Devices

Products qualified with Qi standard.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>