DENON AVS-3 3 IN / 1 OUT HDMI SWITCHER Owner’s Manual

DENON AVS-3 3 IN / 1 OUT HDMI SWITCHER

Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference.

Confirming the accessories

Check that the following parts are supplied with the product.

• There are 5 types of supplied AC adapter plugs. Use the plug appropriate to the region you live in.
  

Inserting the batteries

1. Insert a coin or other item into the slot on the battery cover, turn counterclockwise, and remove the battery cover.
   

2. While pressing down on the battery cover from above, turn the coin or other item clockwise.
   

3. Confirm that the direction of the battery is correct and then insert the battery. Battery (CR2032)
   

NOTE

• If the battery should have a leakage, immediately replace and dispose of the battery. In this case, there is a risk of burn when the liquid comes in contact with skins or clothes, so a great care should be taken. If the liquid accidentally comes in contact, wash with tap water and consult a doctor.
• Remove the batteries from the remote control unit if it will not be in use for long periods.

Operating range of the remote control unit

Point the remote control unit at the remote sensor when operating it.

Part names and functions

Front panel

❶ Remote control sensor
This receives signals from the remote control unit. (v p. 6)
Point the remote control unit at this sensor when operating it.
❷ HDMI input indicators (HDMI INPUT 1 – 3)
The number of the HDMI input that is currently selected is lit.
This is lit as follows according to the power status of this unit:

• Power on: Blue

• Standby: Red

• The power of this unit is linked to the power status of the HDMI devices
  connected to HDMI connectors 1 to 3 and automatically turns on.

• When the HDMI CONTROL switch is OFF:
  Links to the power of the device that is connected to the currently selected
  HDMI input.

• When the HDMI CONTROL switch is ON:
  Links to the power of the devices that are connected to HDMI connectors 1 to

❸ Input switching button (INPUT)
This selects the HDMI input.
When the button is pressed, the HDMI input switches.

Rear panel

❶ Remote control jack (REMOTE CONTROL (FLASHER) IN)
This jack can be used to connect and control this unit externally with a separately sold IR repeater when this unit is positioned where the remote control signal cannot reach.
Refer to “Connecting an external control device” (v p. 14) for how to connect.
❷ HDMI input connectors (HDMI IN 1 – 3)
These connect game consoles, media players, or other HDMI source devices.
❸ HDMI output connector (HDMI OUT)
This outputs the selected HDMI input signal.
❹ DC input connector (DC IN)
This connects the supplied AC adapter.
Using an AC adapter other than the one supplied may cause fault.

NOTE

• This will disable remote sensor reception of this unit.

Side panel

❶ AVR control switch (AVR CONTROL)
You can use the remote control unit for your Denon AV receiver/AV amplifier to switch the HDMI input of this unit.
If using the HDMI control (CEC) function or the supplied remote control unit to change the HDMI input of this unit, keep this switch turned OFF.
If using the AVR control function, it is necessary to change the settings and connections from the AV receiver/AV amplifier in advance. Refer to “Operating with the AVR control function” (v p. 17) for more information.

❷ HDMI control switch (HDMI CONTROL)
If using the HDMI control (CEC) function, turn this ON. This links to devices compatible with HDMI control (CEC) and changes the HDMI input of this unit.
Refer to “Operating with the HDMI control (CEC) function” (v p. 15) for how to operate using the HDMI control (CEC) function.

Remote control unit

❶ HDMI input source select buttons (1 – 3)
These select the HDMI input.

Connections

Basic connections

1. Use separately sold HDMI cables to connect game
   consoles or other source devices to HDMI input
   connectors 1 to 3 of this unit.

2. Use the supplied HDMI cable to connect an 8Kcompatible HDMI input connector of an AV receiver/AV
   amplifier to the HDMI output connector of this unit.

3. Connect the supplied AC adapter.

• When connecting this unit to devices that are compatible with the 8K and 4K 120Hz video, use certified Ultra High Speed HDMI cables. If you use a different HDMI cable, the video may not be displayed or other problems may occur.

When mounting this unit to a wall

You can use the supplied wall-mount bracket to mount this unit to a wall.
To ensure your safety, ask a professional to mount it to the wall.

• When you mount this unit to a wall, use a commercially available IR repeater (separately sold) to receive signals from the remote control. Refer to “Connecting an external control device” ( v p. 14) for more information.

NOTE

• When you mount the wall-mount bracket to this unit, be sure to use the supplied self- tapping screws. Using screws other than those supplied may cause fault.
• To prevent people from accidentally pulling or tripping over the connector cable and causing this unit to fall over, be sure to fix the cable to a wall or other location. After mounting, be sure to confirm that it is safe. Also, perform regular inspections to confirm that there is no possibility of falling.
• Denon does not bear responsibility for any injuries or accidents due to inappropriate mounting locations or mounting methods.

1. Mount the wall-mount bracket to this unit using the supplied screws.
   Attach the wall-mount bracket with the side with the u mark facing outward.
   

2. Fix this unit to the wall using separately sold wallmount screws
   
   

Connecting an external control device

Even if you put this unit in a cabinet or another location where the remote control signal cannot reach, if you connect a commercially available IR repeater (separately sold), you can operate this unit using the remote control unit. This will disable remote sensor reception of this unit.

Operations

Operate using one of the following methods.

Operating with the HDMI control (CEC) function

1. Turn the HDMI CONTROL switch on the side panel of this unit ON.

2. Turn on the power of all source devices (such as game consoles) connected to this unit with HDMI cables, the AV receiver/AV amplifier, and the TV.

3. Enable the HDMI control (CEC) function for all devices.
   ● For source devices that have settings to link to other devices and turn them on when the source device power is turned on, enable those settings. Refer to the manual for each device for more information about the settings.

4. Turn the power of the TV to standby, and then confirm that the power of this unit, the source devices, and the AV receiver/AV amplifier also turn to standby.
   If the power is turned off for all source devices connected to this unit,
   the HDMI input indicators of this unit are lit in red.

5. Turn on the power of the source device you want to use, and then confirm that the power of this unit, the AV receiver/AV amplifier, and the TV turn on, and that the HDMI input switches correctly.
   The indicator for the selected HDMI input is lit in blue.

• If the source device has an auto standby function, it is recommended to enable the auto standby function so that the power turns off automatically when not in use.
• Depending on the specifications of the source device or TV that is connected, some functions may not be available.

Operating with the remote control unit

1. Turn on the power of the source device you want to use.

2. On the supplied remote control unit, press the HDMI input source select button (1 to 3) to perform playback.
   The indicator for the selected HDMI input is lit in blue.
   ● You can also select an HDMI input by pressing the INPUT button on the main unit.

3. Switch the input source for the AV receiver/AV amplifier to the HDMI input connected to this unit.

4. Switch the input for the TV to the HDMI input connected to the AV receiver/AV amplifier.

Operating with the AVR control function

If you have an 8K-compatible Denon AV receiver/AV amplifier, you can use the remote control unit for the AV receiver/AV amplifier to switch the HDMI input for this unit.
The 8K, GAME, and MEDIA PLAYER buttons on the remote control unit for the AV receiver/AV amplifier can be used to switch the HDMI input for this unit as follows.

Buttons on remote control unit for AV receiver/AV amplifier| Input selection on this unit
---|---
8K| HDMI 1
GAME| HDMI 2
MEDIA PLAYER| HDMI 3

NOTE

• This function cannot be used on the AVR-X8500H, AVC-X8500H, AVR-X8500HA, or AVC-X8500HA. It is recommended to use the learning function on the remote  control unit for the AV receiver/AV amplifier.

If you want to use the AVR control function, change the settings and connections for the AV receiver/AV amplifier according to the following procedure.

Positioning

1. Turn the AVR CONTROL switch on the side panel of this unit ON.
2. Position this unit close to your AV receiver/AV amplifier so that the remote control sensor on this unit can receive remote control signals from the AV receiver/AV amplifier.
   

Connecting

1. Connect the source devices connected to the HDMI input connectors for 8K, GAME, and MEDIA PLAYER on the back of the AV receiver/AV amplifier to HDMI input connectors 1 to 3 on this unit.
2. Connect the HDMI output connector on this unit to an8K-compatible HDMI input connector on the AV receiver/AV amplifier.

• The number of the 8K-compatible HDMI input connector varies depending on the specifications of AV receiver/AV amplifier. Connect after referring to the manual for AV receiver/AV amplifier.
• When connecting this unit to devices that are compatible with the 8K and 4K 120Hz video, use certified Ultra High Speed HDMI cables. If you use a different HDMI cable, the video may not be displayed or other problems may occur.

Configuring the settings for an AV receiver/AV amplifier

1. Open the “Inputs” – “Input Assign” settings screen from the menu for the AV receiver/AV amplifier.
2. Configure the settings to assign 8K-compatible HDMI connectors (6(8K) or 7(8K))z to the HDMI input connectors of the 8K, Game, and Media Player input sources.
   The 8K-compatible HDMI connectors vary depending on the specifications of your AV receiver/AV amplifier. Configure the settings according to the specifications of AV receiver/AV amplifier.
   

Operating

1. Press the 8K, GAME, or MEDIA PLAYER button on the remote control unit for the AV receiver/AV amplifier.
   The inputs for this unit and for the AV receiver/AV amplifier switch simultaneously. The HDMI input for this unit that corresponds to the signal received from the button is selected.
   

Troubleshooting

If a problem should arise, first check the following:

1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?

• If steps 1 to 3 above do not improve the problem, restarting the device may improve the problem.
  Remove and re-insert the power cord of the unit.

If this unit does not operate properly, check the corresponding symptoms in this section.
If the symptoms do not match any of those described here, consult your dealer as it could be due to a fault in this unit. In this case, disconnect the power immediately and contact the store where you purchased this unit.

Power does not turn on / Power is turned off

• Confirm that the AC adapter is plugged into the outlet.
• Check all connections to HDMI connectors.
• Check whether the adapter plug for the AC adapter is attached correctly to the AC adapter.
• Use the AC adapter supplied with this unit.
• Confirm that the power is turned on for the source device connected to the selected HDMI input. The power for this unit is linked to the power of the source device connected to the HDMI input connector, and automatically turns on or to standby.

Power automatically turns off

• This unit is linked to the power of the source device connected to the HDMI input connector, and automatically turns to standby.

Operations cannot be performed through the remote control unit

• The battery is used up. Replace it with a new battery (CR2032).
• Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°.
• Remove any obstacle between this unit and the remote control unit.
• The orientation of the coin type lithium battery (CR2032) is incorrect. Confirm that the q mark on the battery is facing upward.
• The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.
• This will disable remote sensor reception of this unit.

No video is shown on the TV

• Check the connections for all devices.
• Insert connection cables all the way in.
• Check whether you have mistaken the HDMI input connector for the HDMI output connector or vice versa.
• Confirm that the power of the source device is turned on.
• Confirm that the correct inputs are selected for this unit, the AV receiver/AV amplifier, and the TV.
• Confirm that the resolutions of the source device and the TV are correct.
• When enjoying content that is copyright-protected with HDCP 2.2 or HDCP 2.3, use a source device and TV that are compatible with HDCP 2.2 or HDCP 2.3.
• Use a certified Ultra High Speed HDMI cable to enjoy 8K or 4K 120Hz videos.

Inputs of this unit cannot be switched with the HDMI control (CEC)

function

• Check whether the HDMI CONTROL switch on the side panel of this unit is turned ON.
• Check whether the HDMI control function settings are enabled for all devices connected to this unit. In the settings for the connected source devices, if there are settings to link to and turn on other devices when the power is turned on, enable those settings as well.
• The specifications for HDMI control vary by device. If the source device has an auto standby function, it is recommended to enable the auto standby function so that the power turns off automatically when not in use.
• When you make connection related changes such as connecting an additional HDMI device, the link operation settings may be initialized. Turn off this unit and devices connected via HDMI, and turn them on again.
• Depending on the connected devices and settings, the HDMI control function may not work. If the problem is not fixed even after confirming the above, use the remote control unit to change the inputs for this unit directly.

The inputs for this unit change when this unit receives the signals of

the remote control supplied with the AV receiver/AV amplifier

• The AVR CONTROL switch on the side panel of this unit is turned ON. If you do not want to use it, turn the switch OFF.

Trademark information

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
HDR10+™ logo is a trademark of HDR10+ Technologies, LLC.

Specifications

Video

Resolution:| 480i, 480p, 576i, 576p, 720p 50/60, 1080i 50/60, 1080p 24/25/30/50/60/100/120 4K 24/25/30/50/60/100AB/120AB, 8K 24AB/25AB/30AB/50AB/60AB
Color:| Deep Color, x.v. Color, Adobe RGB, Adobe YCC601, sYCC601, BT.2020
HDR:| HDR10, HDR10+, Dynamic HDR, Hybrid Log-Gamma
HDMI features:| HDMI control (CEC), 3D, ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), QMS (Quick Media Switching), QFT(Quick Frame Transport)
Maximum data rate:| 40 Gbps
HDCP Compliance:| HDCP 1.4/2.3
Audio
Audio Format:| LPCM (2ch, 7.1ch) / Dolby Digital / DTS / Dolby Atmos / Dolby TrueHD / Dolby Digital Plus / DTS:X / DTS-HD Master Audio / DTS-HD High Resolution Audio / DTS Express / DSD / MPEG-2 AAC / MPEG-4 AAC / MPEG-H (Works with all audio formats supported by the connected AV receiver/AV amplifier)
AC adapter
Manufacturer:| CUI INC
Address:| 20050 SW 112th Ave. Tualatin, OR 97062
Model identifier:| SMI5-5-V-I38-C9
Input voltage:| AC 100 – 240 V
Input AC frequency:| 50/60 Hz
Output voltage:| 5.0 V
Output current:| 1.0 A
Output power:| 5 W
Average active efficiency:| 75.5 %
Efficiency at low load (±10 %):| 74.3 %
No-load power consumption:| 0.075 W
General
Operating temperature:| 41 °F – 95 °F (5 °C – 35 °C)
Power supply:| AC 100 – 230 V, 50/60 Hz

Dimensions (Unit : in. (mm))

When mounting a wall-mount bracket

Weight: 0.7 lb (300 g) (When not mounting a wall-mount bracket)

www.denon.com
520 10816 00AD
©2021 Sound United. All Rights Reserved.

References

• AVS-3
• support.denon.com/
• denon.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>