ZEBRA MC33 Rechargeable Li-Ion Battery with BLE Beacon User Guide
- June 5, 2024
- ZEBRA
Table of Contents
ZEBRA MC33 Rechargeable Li-Ion Battery with BLE Beacon
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2021 Zebra Technologies Corp. and/or its affiliates. All rights reserved.
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to the following model number: 3PTY-RFID-TC7X
All Zebra devices are designed to be compliant with the rules and regulations
in the locations they are sold and will be labeled as required.
Local language translation
Any changes or modifications to Zebra equipment not expressly approved by
Zebra could void the user’s authority to operate the equipment.
Declared maximum operating temperature: 50°C
For use only with Zebra approved and UL Listed mobile devices, Zebra approved, and UL Listed/Recognized battery packs.
Regulatory Markings
Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc.
Safety in Hospitals and Aircraft
NOTE: Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircraft’s operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments.
RF Exposure Guidelines Safety Information
Reducing RF Exposure Use Properly
Only operate the device in accordance with the instructions supplied.
The device complies with internationally recognized standards covering human
exposure to electromagnetic fields. For information on international human
exposure to electromagnetic fields, refer to the Zebra Declaration of
Conformity (DoC) at zebra.com/doc.
Use only Zebra tested and approved headset, belt-clips, holsters, and similar
accessories to ensure RF exposure compliance. If applicable, follow the
instructions for use as detailed in the accessory guide.
The use of third-party belt clips, holsters, and similar accessories may not
comply with RF exposure compliance requirements and should be avoided.
For further information on the safety of RF energy from wireless devices,
refer to RF exposure and assessment standards section at
zebra.com/responsibility.
Handheld or Body-Worn Devices
To satisfy RF exposure requirements, this device must be hand-held only and,
where applicable, use only with Zebra tested and approved accessories.
Marking and European Economic Area (EEA)
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with
Directives 2014/53/EU and 2011/65/EU.
Any radio operation limitations within EEA countries are identified in
Appendix A of EU Declaration of Conformity. The full text of the EU
Declaration of Conformity is available at: zebra.com/doc.
EU Importer: Zebra Technologies B.V Address: Mercurius 12, 8448 GX Heerenveen,
Netherlands
Waste Electrical and ElectronicEquipment (WEEE)
For EU and UK Customers: For products at the end of their life, please refer
to recycling/disposal advice at: zebra.com/weee.
United States and Canada Regulatory
Radio Frequency Interference Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference Requirements – Canada
Innovation, Science and Economic Development Canada ICES-003 Compliance Label:
CAN ICES-3 ([B])/NMB-3([B])
This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
RF Exposure Requirements -FCC and ISED
The FCC has granted an Equipment Authorization for this device with all
reported SAR levels evaluated in compliance with the FCC RF emission
guidelines. SAR information on this device is on file with the FCC and can be
found under the Display Grant section of
fcc.gov/oet/ea/fccid.
United Kingdom Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with the
Radio Equipment Regulations 2017 and the Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
Any radio operation limitations within UK are identified in Appendix A of UK
Declaration of Conformity.
The full text of the UK Declaration of Conformity is available at:
zebra.com/doc.
U K Importer: Zebra Technologies Europe Limited
Address: Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF
Warranty
For the complete Zebra hardware product warranty statement, go to: zebra.com\warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s
network and run your applications.
If you have a problem running your unit or using your equipment, contact your
facility’s Technical or System Support. If there is a problem with the
equipment, they will contact Zebra support at zebra.com/support.
For the latest version of the guide go to:
zebra.com\support.
Software Support
Zebra wants to ensure that customers have the latest entitled software at the
time of device purchase in order to keep the device operating at peak
performance levels. To confirm that your Zebra device has the latest entitled
software available at the time of purchase, go to zebra.com/support.
Check for the latest software from Support > Products, or search for the
device and select Support > Software Downloads.
If your device does not have the latest entitled software as of your device
purchase date, e-mail Zebra at
entitlementservices@zebra.com and
ensure you include the following essential device information:
- Model number
- Serial number
- Proof of purchase
- Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the latest version of software, as of the date you purchased your device, you will receive an e-mail containing a link directing you to a Zebra Web site to download the appropriate software.
Product Support Information
- For information on using this product, see the User Guide at zebra.com/support.
- To find quick answers to known product behaviors, access our knowledge articles at supportcommunity.zebra.com/s/knowledge-base.
- Ask your questions in our Support community at supportcommunity.zebra.com.
- Download product manuals, drivers, software, and view how-to videos at zebra.com/support
- To request a repair for your product, go to zebra.com/repair.
Zebra Technologies | 3 Overlook Point |
Lincolnshire, IL 60069 USA
www.zebra.com
Documents / Resources
|
ZEBRA MC33 Rechargeable Li-Ion Battery with BLE
Beacon
[pdf] User Guide
RFIDTC7X, UZ7RFIDTC7X, 3PTY-RFID-TC7X, MC33, Rechargeable Li-Ion Battery with
BLE Beacon, MC33 Rechargeable Li-Ion Battery with BLE Beacon
---|---