Monoprice Premium Hi-Fi DJ Style Over-The-Ear Pro Headphones-Complete Features/User Manual

Monoprice Premium Hi-Fi DJ Style Over-The-Ear Pro Headphones

Specifications

• BRAND : Monoprice
• COLOR : Black
• CONNECTIVITY TECHNOLOGY : Wired
• MODEL NAME : Pro Headphones
• FORM FACTOR : Over Ear
• PRODUCT DIMENSIONS: 9.3 x 9.2 x 3.5 inches
• ITEM WEIGHT: 15.8 ounces

Introduction

DJs can work long hours spinning records, so they require equipment that is both comfortable and durable enough to survive frequent use. These Monoprice Pro Headphones are for the professional sound mixer as well as the casual listener who wants the highest sound quality and endurance. These headphones have thick, comfy padding in the earpieces that keeps the music within and the noise outside. They may be swiveled up to 90 degrees and used as temporary speakers. The headphones include a 1.5-inch extension on each side and are wide enough to fit over a cap while keeping good contact with the ears. The inside of the headgear is similarly padded, and it’s constructed of flexible rubber, so it won’t break. There is no fixed wiring on the headsets. Instead, a 3.5 mm connector is located at the bottom of the left earpiece, which can be used to connect a conventional 3.5 mm audio patch cable. This means that if a wire breaks, you don’t have to toss the headphones away or undertake a messy repair; simply replace the cable and you’re ready to rock again! These ‘phones offer good volume and superb sound clarity at all frequencies thanks to their 50 mm drivers and 100 dB sensitivity.

Two gold-plated 3.5 mm male-to-male audio cables and a 3.5 mm to 1/4-Inch gold-plated adaptor plug are included in the kit. The thicker cable is nearly 11.5 feet long and is ideal for professional use as well as relaxing on your couch while listening to music. A thinner, lighter cable, measuring around 50 inches in length and better suited for more portable operations, is also included. High-fidelity audio, long-lasting durability, and maximum comfort.

HOW TO WEAR

Put on the in-ear headphones after ensuring proper orientation. Place each ear tip on the side of your head that corresponds to it. With the other hand, gently pull your earlobe to make enough space to gently slide the ear tip within your ear canal. Place the wire in front of or behind you, depending on your inclination.

HOW TO PAIR

To turn on the headphones, press and hold the MFB Button for three seconds while they are turned off. When the Bluetooth® LED flashes red and blue alternately, the headphones are in Bluetooth pairing mode.

Frequently Asked Questions

• What exactly is a hi-fi earphone?
  Simply, HiFi headphones are those that provide high fidelity sound. This implies that with hifi music headphones, you’ll be able to listen to a track exactly as it was recorded. As a result, the piece of equipment will play no less of a role in how you listen to music.

• What is a microphone-equipped headphone?
  Earphones or headphones are typically used in conjunction with headset microphones. A broad variety of headsets are available. Stereo sound is supported through headphones with two earcups and an arm-attached microphone, however ambient noise awareness is severely limited. A neckband is also available for these headsets.

• How many hours a day should you wear headphones?
  “As a general rule, you should only listen to MP3 players at 60 percent of maximum volume for a total of 60 minutes every day,” Dr. Foy advises. “The shorter your duration should be, the greater the volume.” You should only listen for around five minutes a day at maximum volume.”

• Are over-ear headphones superior to on-ear headphones?
  On-Ear vs. Over-Ear: What’s the Difference? Over-ear headphones are the second best for passive isolation, as they can block a substantial amount of ambient noise without using active noise cancellation. On the other hand, on- ear headphones do not perform as well. Ear cups that are normally smaller rest on the ears and do not always establish a good seal.

• What is the procedure for turning on Monoprice earbuds?
  By pushing the multi-function buttons on the left and right earphones for 4 seconds until the blue and white lights alternately flash, both earphones will be turned on at the same time. Both the left and right earphones will be linked together.

• What does it mean to have Hi-Fi sound quality?

• Hi-fi audio, commonly referred to as high fidelity audio, is simply high-quality audio. High accuracy in reproducing audible frequencies in audio and very low distortion in the original audio stream are two variables that contribute to this degree of quality. This is what “high fidelity” means in general.

• Is Hi-Fi a good sound?
  Many music fans regard hi-Fi audio equipment to be the gold standard. While some may consider professional-level sound to be too pricey, most audiophiles believe hi-fi equipment to be a wise investment.

• What’s the difference between a Hi-Fi system and a stereo system?
  Hi-Fi is a sound reproduction method that reproduces sound exactly as it was captured, with no compromises in sound quality. Stereo, on the other hand, is a technology that splits signals to produce distinct sounds. All sound- producing gadgets have two channels.

• What is the purpose of the button on headphones?
  This means that the device has a microphone incorporated into the wire of the headphones, allowing you to answer phone calls or utilize voice commands without having to remove your headphones.

• What exactly is the distinction between a headphone and a headset?
  A headset features a built-in microphone that allows you to speak. It is mostly used in video conferencing and video calls, whereas a headphone includes an integrated microphone that is not attached or visible and is primarily used to listen to audio files. Let’s take a look at the differences between headphones and headsets.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>