KINVOCA EG13A Wireless Controller for NS User Manual

KINVOCA EG13A Wireless Controller for NS

Notice
Don’t touch the Joystick when connecting, or it’ll appear drifting.If drifting, please make the calibration.

FEATURES

Product Highlights

Playing Modes

• Attach on the console and play hand held.
• Attach on the frame to play wirelessly as a remote pro controller.
• Detach from the console/frame. left and right separated but still work as one controller.
• Use as two separated controllers in multiplayer Joy Con supported games.

Programmable Buttons

Two programmable function buttons, one on each side of the Joy Pad that could be mapped to a button on its side accordingly.

Turbo

Adjustable turbo speed levels allow you to fire rapidly up to 20 shots/s without tiring.

Motion Control

Support the motion control functions in every playing mode listed above with the built-in 6- axis Gyro for each side of the Joy-Pad.

Wake-up and One click Connection

Press the HOME button and easily wake up the console remotely.

Dual Motor Vibration

Built-in motor for vibration on each side of the Joy Pad.

Connection Method

Face up with the Joy Pad. The Joy Pad with the  button on the upper position is installed on the left side of the NS host. The Joy Pad with the + button on the upper position is installed on the right side of the NS host.

Connect the Joy Pad to Switch devices

Following and + side, slide Joy-Con from the top down along the sliding rails on both sides of the Switch console until it clicks.

Detach the Joy Pad on the device

Find out the release button on the upper back of Joy-Pad. Hold down the release button and slide Joy-Pad from bottom to top until Joy Pad is completely detached from the device, and then release the button. The pairing information is NOT deleted when the Joy Pads are detached. You can now use them as wireless controllers.

CD First Connection

Notice: Please do not touch joysticks during the initial pairing. A host can connect 7 control devices which are equivalent to each other.
Wired Connection lnsert and slide down Joy-Pad along game console’s sliding rails until it clicks. After the first successful connection you can detach the Joy-Pad to use, and the Joy Pad will automatically connect to the host. Wireless Connection: Turn on the screen select Controllers Change Grip /Order, hold SYNC Button until signal lights flashing.

Re connection

Wired Connection: Attach your Joy-Pads to the console directly. Press the HOME button to wake up the console. Wireless Connection Turn on screen, press the screenshot button or HOME button until signal lights flashing.

Wireless Connection

Step 1
Press the host power button to access the host interface, click on Controllers

Step 2
Click on Change Grip/Order

Step 3
Press the SYNC button on the two Joy-Pad for more than 2 seconds for connecting at this time, the 4 LED will flash. After it connects successfully,the corresponding Player LED indicator is always on. And then press the L +R button to use it.

Note
The method of connecting the Switch Lite host for the first time is the same as Wireless Connection method of connecting the Switch host.2,lf the above connection methods do not work Please press the reset button on the back of Joy-Pad for more than 5 seconds until the Joy Pad turns off and resets. If you want to reconnect it again please refer to Re connection method of connecting the Jon-Pad for the first time.If it still doesn’t work, please contact Customer Service for a replacement.

Automatic sleep mode

When Joy-Pad is installed on the host, the Joy Pad will automatically into sleep mode if the host screen turns off. You can press the HOME button to wake up the host. When Joy-Pad and the host are separated. Joy-Pad will go into sleep automatically if there is no operation within 5 minutes.

Turbo Function

1. Manual turbo :  hold TURBO Button and press AB/X/Y/UR /ZL/ZR
2. Automatic turbo:  hold TURBO Button and press NB/X/Y /UR/ZUZR again.
3. Tum off turbo: hold TURBO Button and press AB/X/Y/L/R /ZLZR the 3rd time.

Notice

• Turbo function of specific button is independent to each other.
• You may verify turbo function in below route system settings-controllers and sensors-test input devices- test controller buttons.
• Turbo function of left and right joy pad are not interoperable.
• It only controls its own half.

Programmable Macro Function

Supported Buttons NB/X/YLZL/R/ZR/D Pad

• Keep controllers connected. Hold MACRO Buttons 3s until the indicator light flashing slowly.
• Press buttons that need setting in turn and the programming button will record every button’s time interval.
• Eg Press A Button first-wait 1 second and press B Button-wait 3 seconds and press X button press MACRO
• Button to save setting.
• When you press “MACRO” Button, it will input A 1s,B.3s.X
• Clear setting, Keep controller connected. hold MACRO Button for 6 seconds until indicator light flashing quickly.

Notice
You may verify the combination and interval time in below route: system settings- controllers and sensors- test input devices- test controller buttons.  Macro function of left and right joy-pad are not interoperable. It controls its own controller. Macro function can be memorized. If the controller is disconnected and then connected to the console again, the previous programming setting is still available.

Vibration Intensity Adjustment

There Are Four Levels of Vibration Intensity: None, weak, medium, strong.

Press and hold the Turbo button and push the joystick up to increase the motor vibration; pull down the joystick to decrease one grade of turbo speed. Please Note: Vibration settings will be retained when the controller turns into sleep mode or is powered off.

Joystick Calibration

Press the HOME button > System Settings > Controllers and Sensors> Calibrate Control Sticks. Follow the on screen instructions to verify the controller functionality.

Motion Control Calibration

Press the HOME button > System Settings > Controllers and Sensors> Calibrate Motion Controls> Calibrate the Controllers > Put the controller on a horizontal plane and hold or + on the controller you want to calibrate.
Please Note
When using the wireless controller for the first time, it is recommended to have both the Controller Sticks and Motion Controls calibrated before usage. If the calibration fails, please press the Y button to restore the settings and press the X button to repeat the calibration steps. Power off the controller once the calibration is finished, then restart the controller and console.

Charging Instruction

When the Joy-Pad’s battery is low, the main screen will show the message prompting to charge. There are two ways to charge:

1. Attach the Joy-Pad on the console to charge.
2. The battery icon on the main screen will display green by checking on HOME> Controllers.
3. Attach the Joy-Pad on the frame and charge using the cable provided in the package.
4. The 4 LED indicators flash slowly when charging, LED indicators will go off when fully charged.
5. These Joy-Pads DO NOT support high wattage fast charging. To ensure safe usage and best performance, when charged on the frame, please use the provided cable and 5V 1A power source.

Product Specification

• Joy Pad size: 13011147.4 mm
• Weight: 68 ± 5g (single)
• Material: ABS
• Connection Method: Wireless or Wired Connection
• Input Voltage and Current: DC 5V, 210mA
• Battery Capacity: 300mAh
• Charging time: 2H
• Usage time: 8H

Attention

Our products do not have the NFC function, and the Joy-Pad is not equipped with an infrared camera. It’s not suitable for games that require such functions. The vibration experience may be different in some games. Our products are compatible with Switch OLEO, Switch Previous Models, and Switch Lite. Our Joy-Pads can replace the original Joy Con, but they may not be suitable for the accessories correspond­ing to the original Joy Con.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>