KEMI MOTO F0507-00102-BK Bluetooth Speaker Instruction Manual
- August 21, 2024
- KEMI MOTO
Table of Contents
KEMI MOTO F0507-00102-BK Bluetooth Speaker
Product Information
Specifications:
- SKU: F0507-00102-BK
- Estimated Installation Time: 20 minutes
- Bluetooth Speaker x1
Product Usage Instructions
Installation Tips:
- Remove the original screw [A] from the vehicle.
- Remove the original bracket and screws [B] on both sides.
- Remove the original screw [C].
- Thread the [1]-button panel through the middle of the front of the vehicle.
- Fix button [1] with the original screw [C].
- Unplug the original plug [D].
- Plug the [1] speaker plug into the original plug [D] and the vehicle light separately.
- Use the original screw [B] to attach [1] to the vehicle on both sides.
- Install the original vehicle shell with the original screw [A].
- Complete the installation process.
Functionality:
The product features various button functions:
- Volume Down
- Indicator Light Power Supply
- Volume Up
- Quick Volume Switching (0%, 50%, 100%)
- Pause
- Previous Song
- Next Song
Frequently Asked Questions (FAQ):
-
Q: What is the FCC Statement for this product?
A: The device complies with Part 15 of the FCC Rules. Operation is subject to specific conditions to avoid interference. -
Q: What are the FCC Radiation Exposure guidelines for this product?
A: The equipment should be operated with a minimum distance of 20cm between the radiator and the user’s body to comply with FCC radiation exposure limits.
SKU : F0507-00102-BK
BEFORE YOU BEGIN
- Please read the instructions carefully and verify that each item is in the list.
- Please retain these installation instructions for further reference and parts ordering information.
IMPORTANT
- Please read the installation instructions carefully before you start.
- If the vehicle is clean and free of other debris, it will be easy to install.
- For your safety and to ensure a satisfactory installation, please complete all the installation steps in the order shown below.
PRODUCT INFORMATION
- Bluetooth Speaker x1
Estimated installation time:
- 20 minutes
INSTALLATION TIPS
- STEP 1: Remove the original screw [A].
- STEP 2: Remove the original bracket, and then remove the screws [B] on both sides.
- STEP 3: Remove the original screw [C].
- STEP 4: Thread the [1]-button panel through the middle of the front of the vehicle.
- STEP 5: Fix button [1] with the original screw [C].
- STEP 6: Unplug the original plug [D].
- STEP 7: Plug the [1] speaker plug into the original plug [D] and the vehicle light separately.
- STEP 8: Use the original screw [B] to attach [1] to the vehicle, with both sides
- STEP 9: Install the original vehicle shell with original screw [A].
- STEP 10: Installation complete.
FUNCTION
Button function description.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.