TOA BDA012AYMJ Chentech LLC Pendant Speaker 2AYM User Manual

BDA012AYMJ Chentech LLC Pendant Speaker 2AYM
User Manual

GETTING STARTED

1. Make sure all items listed in the BOX CONTENTS are included in the box.
2. READ SAFETY INSTRUCTIONS BEFORE USING THE PRODUCT.!
3. MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE BATTERY PRIOR TO FIRST USE FOR MAXIMUM BATTERY LIFE.

Go to www.playwithyourproxy.com for product registration.

BOX CONTENTS!

• Proxy
• Wristband
• Micro USB Cable
• Power Adapter

BUTTON FUNCTIONS

| Power On:
Power Off:
Launch Siri/S-Voice:
Cancel Siri/S-Voice:| Press and hold the button for 4 seconds to power on.
Press and hold the button for 2 seconds to power off.
Press the button to activate Siri/S-Voice.
Press the button to cancel Siri/S-Voice.
---|---|---
| Lower Volume:
Previous Song/Video:| Press and hold the button to lower the volume.
Press the button to play the previous song/video.
| Answer:
Hang-up Call:
Ignore Incoming Call
Play Song/Video:
Pause Song/Video:
Connect Proxy:
Disconnect Proxy:| Press the button to answer the incoming call.
Press the button to hang up the call.
Press and hold the button for 1 second.
Press the button to play a song/video.
Press the button to pause the song/video.
Press button (Must already be paired).
Press and hold the button for 3 seconds.
| Increase Volume:
Next Song/Video:| Press and hold to increase the volume.
Press the button to play the next song/video.

PAIRING A BLUETOOTH DEVICE

1. Press and hold the power button for 4 seconds. The Proxy’s Red and Blue LEDs will blink rapidly.

2. Navigate to your Bluetooth device’s setup screen, find.
   “The Proxy” and connect.

3. If your device asks for a password or pin, skip or cancel. the password or pin input screen.
   Note: The next time you approach The Proxy with your Bluetooth device, it will automatically re-pair.

4. To pair a new device, press and hold the phone button for 3 seconds to break the current connection. The red and blue LEDs will flash repeatedly. Repeat Step 2.

5. If your Bluetooth device is not able to pair to The Proxy, hold the phone button for 3 seconds to break previous Bluetooth connections and power the Proxy off, then back
   Note: If you experience trouble pairing or playing music update your device’s OS.

PROXY-LED ACTIVITY

• Blinking Red and Blue LEDs
  Not Paired/No Connection!

• Blinking Blue LED
  Paired and Connected!

• Solid Red LED
  Charging

• Blinking Red and Blue LEDs
  In Broadcast Pairing Mode

• No LED activity
  No Powered on/Sleep Mode

Safety Information

IC
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC ID: 2AYMJ-BDA01

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>