kamody Melitta Aroma Elegance DeLuxe Filter Instruction Manual

: June 5, 2024
: kamody

Table of Contents

Safety notice
Before first use
Set water hardness
Making coffee
Brewing coffee
Cleaning and maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Melitta Aroma Elegance DeLuxe
Operating Instructions
1100110-08

kamody Melitta Aroma Elegance DeLuxe Filter - figer

A. START/Aroma Control button
B. Aroma Contro
C. TIMER button
D. H (hours)/M (minutes) buttons
E. display| F. recessed area to remove the water tank
G. water level display
H. water tank lid
I. handle to open the swivel filter
J. drip stop
---|---

kamody Melitta Aroma Elegance DeLuxe Filter -
Sicherheit
Dear customer,
Thank you for buying our AromaElegance ® filter coffee maker. We hope you will be very happy with it. If you need further information or if you have any questions please contact Melitta ® or visit us on the
Internet at www.melitta.co.uk

For your safety

****The appliance complies with all valid European guidelines.

The appliance has been tested and certified by an independent test institute.
Please read the safety notes and the operating manual in full. To avoid danger you must pay attention to the safety and operating instructions. Melitta ® is not liablefor damage caused by ignoring these instructions.

Safety notice

This appliance is intended for use in households and similar areas, such as

in kitchens for employees in shops, offices and other commercial areas
in agricultural establishments
in motels, hotels and other residential facilities and bed and breakfast establishments Any other use is considered to be improper use and may result in personal injury or damage to property. Melitta ® is not liable for damage caused by improper use. Please observe the following instructions to avoid injuries in case of misuse:
The appliance must not be placed in a cupboard during operation.
Connect the appliance only to a properly installed earthed socket.
The appliance must always be disconnected from the power supply when unsupervised and before assembly, disassembly or cleaning.
During operation, parts of the appliance such as the steam outlet at the filter become very hot. Avoid touching these parts and avoid contact with hot steam.
Do not open the filter holder during brewing.
The hotplate becomes very hot during use and remains hot for a long time after the brewing process. Contact with the hot plate can cause burns, so avoid touching it.
Make sure that the power cable does not touch the hot plate.
Do not use the appliance if the power cable is damaged.
Do not allow the power cable to come into contact with liquids.
Never immerse the appliance in water.
Do not use the jug in the microwave
Do not clean the parts that come into contact with food with aggressive cleaning agents or scouring cream. Remove detergent residues with clean water. Further information on cleaning can be found under “Cleaning and care”.
This appliance can be used by children from 8 years of age or older if they are supervised or have been instructed in the safe use of the equipment and have understood the potential hazards. Cleaning and maintenance must not be carried out by children unless they are 8 years or older
Hardness setting| I| II| |
---|---|---|---|---
°dH| <7°
DH| 7-14° DH| 14-21°
DH| >21°
DH
ONLY AromaElegance ® : LED flash rhythm (DECALC/HARDNESS button )| . …… …| … …… …| …… …| … …… …
ONLY AromaElegance ® DeLuxe: Display| 1| 2| 3| 4

and are supervised. Keep the appliance and the power cable away from children under 8 years of age.

The appliance may be used by persons with reduced physical, sensory or mental abilities or lack of experience and/or knowledge if they are supervised or have been instructed in the safe use of the appliance and have understood the potential hazards.
Children must not play with the appliance
Replacement of the power cable and all other repairs may only be carried out by Melitta ® Customer Service or by an authorized repair shop.

Before first use

Ensure that the power supply in your home corresponds to that on the model plate on the base of the appliance.
Connect the appliance to a power source. The unused cable can be stored in the base of the appliance1.
Only Melitta ® AromaElegance® DeLuxe: Set the current time using the H and M buttons 2.
This goes faster if you hold down the button. The appliance is only ready for use after setting the time. By simultaneously holding down the H and M buttons 2 for longer than two seconds, you can turn the display light on or off.
All appliances have been tested during production to ensure they work perfectly. Therefore there may be for example water deposits remaining. Rinse the appliance twice with the maximum amount of water and without a filter bag or ground coffee, in order to clean it.
For the best coffee enjoyment and convenient use, the appliance is equipped with various features. These features are explained below.

Set water hardness

Depending on water hardness limescale may build up in the appliance. This increases the appliance’s energy consumption as the lime scale on the heating element can prevent the water from heating effectively. To avoid damage the appliance must be descaled regularly. The descaling display helps you with this 3. If the red LED is permanently lit this
shows that the appliance needs to be descaled (see point 6).
The appliance is pre-set for a high level of water hardness (level 4). You can find out the level of water hardness in your area by asking your local water provider or by using water hardness measuring strips available in the shops. For softer water the descaling of the display can be adjusted to descale less often:

Melitta ® AromaElegance ®

Hold down the DECALC/HARDNESS button 3 for longer than two seconds. The red LED will start to flash. In the factory settings, the LED flashes four times with the following pauses (……).
You can set the water hardness at three other levels.
By briefly pressing the DECALC/HARDNESS button 3 the display changes flashing briefly once, twice, or three times, each time followed by a pause(… …, … …, … …).
The settings and display are shown in table 1.
Once you have set the desired level of water hardness, hold down the DECALC/HARDNESS button3again for longer than two seconds. The red LED will go off and our settings are saved. Melitta ® AromaElegance ® DeLuxe
Hold down the DECALC/HARDNESS button 3 and by briefly pressing the M button 3 set the desired level of water hardness. The hardness level will be shown in the display.
Once you have set the desired level of hardness let go of the DECALS/HARDNESS button 3. Your settings are now saved. Please note:
Water hardness cannot be programmed while brewing.
The last water hardness level chosen remains even after removing the power cable.

Setting the hotplate (ONLY Melitta ® AromaElegance
Keeping coffee e warm on the hotplate affects the tasteof your coffee. To avoid this you should enjoy your coffee fresh, by drinking it as soon after brewing as possible. Unnecessary warming also uses valuable energy. The factory settings for the appliance are for 40 minutes of warming. After this, the hotplate turns off automatically. This time can be changed as needed:

Simultaneously hold down the START button 4 and the TIMER button 5 and by briefly pressing the M button 2 set the desired warming time (20, 40 or 60 minutes). The current warming time is shown in the display.
Once you have set the desired warming time let go of the button. Your setting is now saved.
The last setting chosen remains even after removing the power cable.

Making coffee

For aromatic coffee flavor and the best fit for your filter bag in the filter holder, we recommend using Melitta ® filter bag 1x ®.

Brewing coffee

Ensure that the appliance is connected to a power source.
Remove the detachable water tank by holding the recessed grip and pulling it straight up 6.
Remove the water tank lid and fill it with the desired amount of fresh water from the tap. Using the water level indicator on the tank you can choose the correct number of cups. Small cup symbol = approx. 85ml coffee per cup, large cup symbol = approx. 125 ml coffee per cup 6.
Close the tank by replacing the lid and inserting the tank back in the appliance. Please ensure that you replace the tank upright in the appliance. The guide rails on the appliance (left of the tank) will help you with this 7.
Swivel the filter to the right and remove it from the holder 8.
You can now conveniently rest the filter on your kitchen worktop.
Fold a Melitta® filter bag 1×4 ® at the embossed seams and place in the filter holder. Press the filter bag into the filter holder by hand, to ensure the best fit 9.
Put the ground coffee into the filter bag. The amount depends on your personal taste. We recommend using 6 g of ground coffee per large cup.
Put the filter back into its holder. For this hang first the eyelet of the filter on the top of the swivel arm and afterward press the round base into the clip. An audible click tells you it is inserted properly 10.
Swivel the filter back into the appliance and place the glass pot with a closed lid in the appliance 11.
Turn the appliance on 4. The green LED lights up and brewing begins.
To fully develop the flavor of your coffee even when preparing less than 6 cups, the Melitta ® AromaElegance ® models are fitted with the Aroma Control feature as standard. So even when preparing small quantities of coffee you get the best aromatic coffee experience. When making 2-5 cups press the start button 4for longer than
two seconds. The green LED flashes and brewing begins.
After making the coffee the hotplate keeps it warm and turns off automatically after the time you have set (see point 4). This avoids the unnecessary use of electricity and saves energy. You can of course turn the appliance off manually at any time.
The drip stop prevents your coffee from dripping when you remove the pot from the appliance 12.
With the help of the detachable filter you can dispose of the coffee filter bag simply and easily 8.

5.2 Timer feature (ONLY Melitta ® AromaElegance ® DeLuxe)

The appliance is fitted with a timer. This allows you to set a time at which brewing will automatically begin.

Prepare the appliance as described in point 5.1. brewing coffee, but without pressing the START button.
To set the desired start time hold down the TIMER button 5 and press the H and M buttons 2repeatedly to set the desired start time. This goes faster if you hold down the H and M buttons. The first time you program it, the display will show 00:00.
After letting go of the TIMER button, the current time will show. The chosen start time is saved until you set a different time or remove the appliance from the power source.
By briefly pressing the TIMER button again, the timer feature is activated for the next brewing process. To show this, the white LED 5lights up and the programmed start time shows briefly on the display.
If you wish to activate the Aroma Control for the programmed brewing, then press the START button 4 for longer than two seconds. Now as well as the white LED, a green LED 4 will light up.
The appliance automatically starts to make the coffee at the time you have set.
By pressing the TIMER button again, the time feature can be deactivated at any time. The white LED goes off 5.
If you want to make coffee before the programmed start time then presses the START button 4. The timer feature will then be deactivated.

Cleaning and maintenance

External cleaning

The housing can be cleaned with a soft damp cloth.
The glass pot and lid, the filter insert and the swivel filter can be washed in the dishwasher.
When cold, the hotplate can be cleaned with a soft damp cloth.

Descaling
Based on the water hardness level you have set (see point 3) the descaling program should be run promptly after the DECALC/HARDNESS button 3lights up. The descaling program is only available when the descaling display lights up.

Follow the manufacturer’s instructions regarding amounts and pour the descaler into the water tank.
We recommend using Melitta ® “Anti Calc Liquid for Filter Coffee & Aqua Machines“.
Briefly press the DECALC/HARDNESS button 3.
The red LED begins to flash. In the display, the word “CALC” flashes (ONLY Melitta ® AromaElegance ® DeLuxe).
The descaling process will run automatically, it takes about 25 minutes.
Attention: Only by carrying out the descaling process completely, all limescale deposits will be removed and the red light on the DECALS/ HARDNESS button will go off. The descaling process should therefore not be interrupted before it has run for the full 25 minutes.
After the descaling process is completed the DECALC/HARDNESS button light will go off. The appliance will turn off automatically and go into standby mode.
At the end of the descaling process, the appliance should be rinsed twice through, using the maximum amount of water without coffee, in order to completely remove any remaining limescale deposits.

Notes on disposal

Appliances labeled with this symbol ****are subject to European guidelines for WEEE (Waste Electrical and Electronic Equipment).
Electric appliances do not go in the household bin.
Dispose of the appliance in an environmentally friendly way using suitable collection systems.
Packaging materials are raw materials and can be recycled. Please recycle them.

http://www.melitta.ru/

Shenzhen Melitta Household
Products Co. Ltd
No. 5, Xinglong Road.
Tongfuyu Industry Zone,
Tang Xia Yong Area,
Songgang Town, Baoan District,
518105 Shenzhen, Guangdong, China
www.melitta.ru