Gude KLS 18-0 Accumulator Air Pump Instructions

KLS 18-0/58427
Translation of the original
instructions

KLS 18-0 Accumulator Air Pump

Please read the instructions carefully before starting the machine.
Scope of delivery

AP 18-20, AP 18 -30, AP 18 -40

|
---|---
|
|
|

Technical Data

Noise details
Sound pressure level LpA| 80,5 dB (A)
Measured sound power level LWA| 91,5 dB (A)
Guaranteed sound power level L| 92,0 dB (A)
Measured according to EN ISO 12100:2010;| Uncertainty K =1,5 dB (A)
Wear ear protectors!|
Vibration details|
Vibration total values (triaxial vector sum) determined according to EN 60335|
Vibration emission value ah| 1,527 m/s²
Uncertainty K = 1,5 m/s|

Damage to health arises from vibrations to hands and arms if the device is used for a long time or if the device is not guided and evaluated properly.
Vibration damping systems are no guaranteed protection against white finger disease or carpal tunnel syndrome. Therefore, it is necessary to carefully check the state of your fingers and wrist if you have regularly used the appliance for a long time. If any symptom of the disease above appears, seek medical advice immediately. To reduce the white finger disease risk, keep your hands warm and take regular breaks during your work.
Read and understand the operating instructions before using the appliance. Familiarise yourself with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under the supervision of the trainer during occupational education.
In case of any doubts about connection and operation refer please to our customer center This appliance has not been designed to be used by persons (including children) with reduced physical, sensory or mental capabilities or with a lack of knowledge or experience.
Children must be supervised in order not to play with the machine.

Specified Conditions of Use

The compressor may only be used to generate compressed air for household and hobby use. – Respecting technical data and safety precautions.
The compressed air produced by the unit cannot be used in the pharmaceutical, food or hospital sectors and must not be used to fill diving gas cylinders.
The appliance must be used in suitable rooms (well-ventilated, with a room temperature between +5° and +40°C), never in the presence of dust, acids, vapors, explosive or flammable gases.
Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.
Please note that our equipment has not been designed for commercial, craft or industrial use. If the equipment is used in commercial, craft, or industrial operations or for similar activities, we cannot assume any liability.
The machine may only be used in a technically perfect condition and taking into account all safety information.
Residual Risk
Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm
and calm them down.
If you seek help, state the following pieces of information

1. Accident site,
2. Accident type,
3. Number of injured persons,
4. Injury type(s)

Requirements for operating staff

This appliance has not been designed to be used by persons (including children) with reduced physical, sensory or mental capabilities or with a lack of knowledge or experience. Qualification: Apart from the detailed instructions by a professional, no special qualification is necessary for appliance use.
Minimum age: : Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under the supervision of the trainer during occupational education.
Training: Using the appliance only requires corresponding training by a professional or the Operating Instructions. No special training is necessary.

General Power Tool Safety Warnings

WARNING Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future reference. The term „power tool“ in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
Work area safety
a) Keep the work area clean and well-lit.  Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.  Power tools create sparks that may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

1. Electrical safety
   a) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators.  There is an increased risk of electric shock if your body is earthed or grounded..
   b) Do not expose power tools to rain or wet conditions.  Water entering a power tool will increase the risk of electric shock.

2. Personal safety
   a) Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.  A moment of inattention while operating power tools may result in serious personal injury.
   b) Use personal protective equipment. Always wear eye protection.  Protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries.
   c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up, or carrying the tool.   Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
   d) Remove any adjusting key or wrench before turning the power tool on.  A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times.  This enables better control of the power tool in unexpected situations.
   f ) Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
   g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.  The use of dust collection can reduce dust-related hazards.
   h) Do not let familiarity gained from the frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

3. Power tool use and care
   a) Do not force the power tool. Use the correct power tool for your application.  The correct power tool will do the job better and safer at the rate for which it was designed.
   b) Do not use the power tool if the switch does not turn it on and off.  Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
   c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.  Such preventive safety measures reduce the risk of starting the power tool accidentally.
   d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.  Power tools are dangerous in the hands of untrained users.
   e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
   f ) Keep cutting tools sharp and clean.  Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
   g) Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.  Use of the power tool for operations different from those intended could result in a hazardous situation.
   h) Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

4. Battery tool use and care
   a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
   b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
   c) When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
   d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

5. Service
   Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety Warnings

WARNING! Electric shock! There is a risk of an injury caused by electric shock!
Check the voltage. Technical data given on the type label must correspond with the electric network voltage. The compressor must not come into contact with water or other liquids. In addition, the liquid jet coming out of the tools connected to the compressor must never be directed at the compressor itself The appliance is live and electric shocks or short circuits could occur.
Do not operate the appliance barefoot or with wet hands and feet.
**** Compressed air is a potentially dangerous form of energy, therefore it is essential to exercise caution when using the compressor and its accessories.
This appliance is not intended for use by persons (including children) with limited physical, sensory or mental capabilities or insufficient experience and/or knowledge unless they are supervised by a person who is responsible for their safety or has been instructed by them in the safe use of the appliance.
Children should be supervised to ensure that they do not play with the appliance. Instruct children and unauthorized persons to keep away from the appliance at all times.
Never operate the compressor unattended.
Never direct the compressed air/liquid jet at people, animals, or yourself.
Never hold the air jet in body orifices, this can cause fatal injuries!
Keep the work area tidy at all times.
Protective goggles should be worn while using the compressor to protect the eyes from foreign bodies thrown up by the compressed air jet.
If possible, wear protective clothing when using pneumatic accessories.
Always keep a safe distance of at least 4 meters between the compressor and the work area.
Always carry the compressor by the handle only.
Never leave the appliance exposed to adverse weather conditions (rain, sun, fog, snow).
Do not use the compressor outdoors in rain or bad weather!
Do not place flammable objects or objects made of nylon and fabric near and/or on the compressor.
Do not cover the air intake openings on the compressor.
Store unused machines and tools safely in a dry place, out of the reach of children.

Symbols

Read the operating instructions to reduce the risk of injury.
Wear ear protectors! Wear eye protective goggles!
Take the replaceable battery from the appliance before any extension, cleaning or servicing works.
Keep dry at all times. Never expose the tool to rain.
Keep children and other persons including animals at a safe distance when using the appliance.
Protect against cold
Safety class III
Any damaged or disposed of devices must be delivered to appropriate collection centers.
CE marking

Maintenance

Take the replaceable battery from the appliance before any extension, cleaning, or servicing works.
Never clean the machine and its components with solvents, flammable or toxic liquids. Use only a damp cloth making.
Oil-free
No need to fill up with oil for operation
Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
Repairs and works specified in these Instructions may only be performed by qualified authorized staff.
Use only original accessories and original spare parts. Keep the device, in particular the air vents, clean at all times. Never spray water on the device’s body!
Do not clean the plastics with solvents, or flammable or toxic fluids. For cleaning, use a damp cloth only.
Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
If necessary, a list of spare parts can be found at www.guede.com.
Transportation and Storage
Secure the device against shifting and toppling during transport.
Handling equipment is to be used only when handling the machine.
The machine is to be stored in a dry place.
Disposal
Any damaged or disposed of devices must be delivered to appropriate collection centers.
Transport packaging disposal The packaging protects the machine against damage during transport. Packaging materials are usually chosen based on environmental aspects and waste treatment principles and are therefore recyclable. Returning the packaging into material circulation saves raw materials and reduces waste production. Parts of packaging (e.g. foils, styropor®) can be dangerous for children. Risk of suffocation!
Keep parts of the packaging out of reach of children and dispose of them as soon as possible.

Guarantee

The warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.
The guarantee solely covers inadequacies caused by material defects or manufacturing defects. An original payment voucher with the date of the sale needs to be submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorized use such as appliance overloading, use of violence, or damage as a result of any unauthorized interference caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.
Important information for the customer
Please note that returns within or outside the warranty period should always be in the original packaging. This measure effectively avoids unnecessary transport damage and any associated disputed ruling. Your equipment is optimally protected only in the original box, and keeping it in that box will ensure smooth processing.
Service
Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you without needles bureaucracy on our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label.
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
Email: support@ts.guede.com

Failure removal

battery and charge occasionally
The safety valve blows off| The tank pressure is higher than the set cut-out pressure| Have the pressure switch readjusted/replaced by a qualified person (Gude Service)
| The safety valve is defective| Replace the safety valve or contact Gude Service
The compressor unit becomes too hot| The supply of air is not sufficient| Ensure sufficient ventilation (minimum distance from the wall 40 cm).
The compressor unit is overheated and| The compressor unit is overloaded 4| Notify Gude Service
the compressor switches off| The compressor unit is defective| Notify Gude Service
| Undervoltage present at the com- pressor unit| Charge the battery

Translation of the EC-Declaration of Conformity
We, hereby declare the conception and construction of the below-mentioned appliances correspond – at the type of construction being launched – to the appropriate basic safety and hygienic requirements of
EC Directives.
In case of any change to the appliance is not discussed with us the
Declaration expires.
Compressor and air pump set

Appropriate EU Directives

Annex IV

Type Ex. Cert.-No.:
97/68/EC_&2016/1628/EU
Emission No.:
2000/14/EC_2005/88/EC
Method of compliance assessment
Annex VI
Harmonized standards used
EN 60335-1:2012/A13:2017
EN 62233:2008
EN ISO 12100:2010
EN 1012-1:2010
EK9-BE-88(v2):2020
EK9-BE-91(v4):2020
AfPS GS 2019:01 PAK
EN 55014-1:2017
EN 55014-2:2015
Guaranteed sound power level

Measured sound power level

Wolpertshausen,
13.04.2021

Managing Director
Authorized to compile the technical file

GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Deutschland
Tel.: +49-(0)7904/700-0
Fax.: +49-(0)7904/700-250
eMail:info@guede.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>