DOMO DO703BL 1500 Millilitres Glass Blender Instructions
- June 3, 2024
- DOMO
Table of Contents
DOMO DO703BL 1500 Millilitres Glass Blender
Read all instructions carefully – save this instruction manual for future reference.
WARRANTY
Dear client ,
- All of our products are always submitted to a strict quality control before they are sold to you. Should you nevertheless experience problems with your device, we sincerely regret this.
- In that case, we kindly request you to contact our customer service.
- Our staff will gladly assist you.
- PH: +32 14 21 71 91
- EMAIL:info@linea2000.be
- Monday – Thursday: 8.30 – 12.00 and 13.00 – 17.00
- Friday: 8.30 – 12.00 and 13.00 – 16.30
- This appliance has a two year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party.
- The guarantee is issued with the original till receipt. All parts, which are subject to wear, are excluded from the warranty.
- If your device breaks down within the 2-year warranty period, you can return the device together with your receipt to the shop where you purchased it.
- The guarantee on accessories and components that are liable to wear-and-tear is only 6 months.
- The guarantee and responsibility of the supplier and manufacturer lapse automatically in the following cases:
- If the instructions in this manual have not been followed.
- In case of incorrect connection, e.g., electrical voltage that is too high.
- In case of incorrect, rough or abnormal use.
- In case of insufficient or incorrect maintenance.
- In case of repairs or alterations to the device by the consumer or non-authorised third parties.
- If the customer used parts or accessories that are not recommended or provided by the supplier / manufacturer.
SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be taken, including the following:
- Read all instructions carefully. Keep this manual for future reference.
- Make sure all packaging materials and promotional stickers have been removed before using the appliance for the first time.
- Make sure children cannot play with the packaging material.
- This appliance is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance can be used by children aged from 16 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 16 and supervised.
- Keep the appliance and its cord out of reach of children younger than 16 years.
- The appliance must be disconnected from its power source when not in use, during service and when replacing parts. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- CAUTION: In order to avoid a hazard this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Never leave the appliance unattended while it is functioning.
- Do not use or store this appliance outdoors.
- Do not use this appliance for other than intended use.
- Check carefully that the voltage and frequency of the power net match the indications on the rating label of the appliance.
- The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local standards and requirements.
- Only use the utensils delivered with the appliance.
- Do not operate this appliance with a damaged cord or plug or in the event the appliance malfunctions or has been damaged in any manner. Return the appliance to the DOMO Service Department or its service agent for examination, repair, or electrical or mechanical adjustment. Do not try to repair the appliance yourself.
- To protect against electrical shock or burns, do not immerse unit, cord, or plug in water or other liquid.
- Do not operate the appliance with wet hands.
- A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. DO NOT USE WITH AN EXTENSION CORD.
- Unwrap the cord completely to prevent overheating of the cord.
- Do not let the power supply cord hang over the edge of a counter, or touch hot surfaces.
- Do not allow the power cord supply to run underneath or around the unit.
- Do not use the appliance if there is any water in it or the parts are still wet after cleaning.
- Do not use the appliance without ingredients.
- Handle with great care when using sharp accessories like knives. Only touch the accessories when they stopped moving inside the appliance.
- Failure to maintain this appliance in a clean condition could adversely affect the life of the appliance and possibly result in a hazardous situation.
- Any injury or damage caused by failure to comply with these rules are at your own risk. Neither the manufacturer, importer, or the supplier may be held liable.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
PARTS
- Measuring cup
- Lid
- Glass jar
- Sealing ring
- Blade assembly
- Motor unit
- Speed knob with pulse function
BEFORE THE FIRST USE
Assemble the appliance following these steps:
- Position the seal on the blade assembly. Hold the glass container upside down. Screw the blades clockwise onto the glass container.
- Turn the measuring cup clockwise into the lid. Now place the lid on the glass container so that the pouring spout and the shape of the lid match.
- Position the container with lid on the motor block. Turn the glass container one-quarter turn to the left so that the container is locked onto the motor block. The blender is now ready for use.
USE
-
Make sure that the speed regulation button is at “0”.
-
Put the plug in the outlet and position the glass container on the engine block.
-
Fill the glass container with the desired ingredients, between the minimum (0.5 l) and maximum (1.5 l) indication lines.
-
Position the lid with measuring cup on the container and turn the speed regulator to the desired speed:
- Position 1: for light liquids
- Position 2: for thicker fluids and solid foods
-
For quick and accurate blending, turn the speed knob to the pulse function (to the left of 0) and hold for a few seconds. When you release the knob, it will automatically reset itself to the 0 position. You can do this a few times in a row, until the desired consistency has been reached.
-
If you want to add ingredients while you are blending, remove the measuring cup from the lid and put the extra ingredients into the jar through this fill opening.
-
When crushing ice or blending hard foods, keep 1 hand firmly onto the lid.
-
Turn off the blender by setting the speed knob to 0.
-
Unplug the blender after use.
Caution:- For each use, the consecutive operation time should not exceed 3 minutes. Between two continuous cycles at least 10 minutes resting time should be maintained. The appliance needs to cool down to room temperature before starting the next blending cycle.
- Never use boiling liquids or do not use the blender when the jar is empty.
CLEANING AND MAINTENANCE
-
Pour some warm soapy water into the jar and turn the speed knob for a few seconds to the pulse function. Empty the jar.
-
Unplug the blender before continuing with cleaning.
-
Always clean the blender immediately after us for easy cleaning. Do not let food dry in the jar or the blade assembly, this will make them harder to clean.
-
Disassemble the removable parts. Remove the lid from the container and the measuring cup from the lid. Place the container upside down and unscrew the blades counter-clockwise.
-
Clean the measuring cup, the lid and the jar by hand.
-
Clean the blades with some warm soapy water and rinse under the tap. Do not touch the blades and be extra careful. Do not immerse the blade assembly in water. Let the blade assembly dry upside down, out of reach of children.
-
Wipe the motor unit clean with a damp cloth and dry thoroughly.
Caution:- Never immerse the motor unit in any liquid to avoid the risk of electrical shock.
- Do not use any rough scouring pads or cleaners on the parts or on the finish of the appliance.
ENVIRONMENTAL GUIDELINES
- This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it must be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
- The packaging is recyclable. Please treat the packaging ecologically.
ORDER
the original Domo accessories and parts online at: webshop.domo-
elektro.be
ABOUT COMPANY
- LINEA 2000 bvba
- Dompel 9
- 2200 Herentals
- Belgium
- Tel: +32 14 21 71 91
- Fax: +32 14 21 54 63
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>