YUSING 2AHGMSMARTBULB Smart Bulb User Manual

YUSING 2AHGMSMARTBULB Smart Bulb

Download and install the APP

• Scan the QR code above or search “Tuya Smart” in the application market to download and install the App.

Sign in App

1. Sign in with your mobile phone number + verification code. Select your country code, enter the phone number, and tap “Get” to get a message containing the verification code. Enter the verification code in the message and tap “Login” to log in to the App.
2. Sign in with social media account.

Add device

When installing the lamp, please reset it to enter the networking state. The steps are: On OFFONuntil it flashes rapidly. Switch time interval shall not exceed 10 seconds. Then tap”+” at the upper right corner of the “Devices” interface and pick the Lighting to connect the APP

Note

1. Connect light bulbs only via WiFi and Bluetooth for the first time, please make sure that the light is quickly flashing, and the WiFi password you inputted is correct. (The connection process may take several minutes, please be patient.)
2. After the first connection, you can use a new WiFi or mobile data traffic to control lights anytime at anywhere.

Control device

After the device is connected successfully, tap “Devices” at the bottom. The device name of the smart lamp shows in the list. Tap it to enter the control panel of the smart lamp.

1. White mode: Adjust the brightness and color temperature of white light.
2. Color mode: Adjust color, brightness, and saturation of colorful light.
3. Scene mode: Eight scene modes(4 static & 4 dynamics)

• “Night” (Orange light helps to sleep)
• “Reading” (Bright white light helps to concentrate)
• “Party” (Orange-red light creates a vivacious atmosphere)
• “Leisure” (Light blue light is relaxing)
• The 4 modes above are not adjustable
• “Soft” (Light changes from dim to bright)
• “Rainbow” (6 colors rotate in sequence with flashing)
• “Shine” (Disco light)
• “Gorgeous (6 colors rotate smoothly in sequence)
• Colors, flashing frequency, and brightness can be specified in the 4 modes above.

1. Timer setting
2. Create a group: If you got two or more lights please tap. at the upper right corner of the control panel and create a group. The smart lamp group will realize synchronous switch, color changes, the scene mode selection, timer, etc. (Group control is limited to the same model of the bulb)

Profile

1. Device Sharing:  Could type in a new member’s mobile phone number and share the device with him. The new member can control the device with his own account.The list shows all members who are added by your account. You can delete the member and cancel the sharing by sliding to left.
2. Integration: Connect Amazon echo & Google home instruction manual. At present, there’re only 3 orders available in Amazon Echo and Google home: color changing. Brightness setting and switch on or off the light.

Note

1. one key sharing function enters the phone number and shares immediately, the number to be shared is unlimited (The shared number must be a registered number of Tuya App)
2. After sharing, new equipment and new settings will be shared with the receiver, but the lamp group won’t be shared.
3. Third-party registration accounts are temporarily unable to connect to Amazon echo, limited to the mobile phone registered accounts.

Note

1. After you power off the light and power it back on, you have to connect the first WiFi to control the light.
2. only supports WLAN in 2.4GHZ, Android 4.1 above, and ios 8.0 above. Do not apply to 5G WiFi.
3. When you connect multiple WIFI bulbs, don’t let both bulb too close, it may cause signal interference.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>