EASYSMALL P2 Automatic Control Device Instructions
- July 18, 2024
- EASYSMALL
Table of Contents
EASYSMALL P2 Automatic Control Device
INSTALLATION AND USE
EASYSMALL is a compact and cost-effective electronic control and protection device for single-phase domestic pumps with power up to 1.5 HP.
PRODUCT DESCRIPTION
- EASYSMALL features a pressure sensor and a flow sensor linked to an electronic system that automatically activates the pump when a faucet’s opening lowers the pressure below a specified level and deactivates it when the flow stops or dips under 2 l/min.
- EASYSMALL is also equipped with:
- a pressure gauge for immediate pressure readings;
- an integrated and inspectable check valve;
- Two outlets to fit existing systems and to allow for the installation of a small expansion tank, ensuring better operation (1SF).
EASYSMALL’s integrated electronics protect the pump from:
- Dry running
- frequent starts due to leaks in the system;
- lockout due to system inactivity.
DIMENSIONS AND WEIGHT
- Clean water
- Domestic use
TECHNICAL DATA
TYPE
Single- phase
| P2| Power supply| Continuous duty current
---|---|---|---
kW| HP| Volt| Hz
EASYSMALL| 1.1| 1.5| 230| 50/60| 10 A
PERFORMANCE RANGE
- Restart pressure : 1.5 bar
- Max load capacity : 120 l/min (7.2 m3/h)
APPLICATION LIMITS
- Liquid temperature up to +50 °C
- Ambient temperature up to +40 °C
- Maximum operating pressure 10 bar
- Protection rating: IP 65
ACCESSORIES
- 1SF 1 litre(1″ M) technopolymer tank
- GSR Special three-piece coupling with o-ring seal (1″)
PATENTS – TRADE MARKS – MODELS
- Registered Community Model No. 001774928
- EASYSMALL® registered trademark No. 0001511131
ADJUSTMENT
To avoid frequent restarts due to possible micro leaks in the system and for
greater energy savings, the 1SF tank should be installed with a precharge of
1.2 bar.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>