Sunco WP_BR-3050K LED Wall Pack User Manual

Sunco WP_BR-3050K LED Wall Pack

Specifications

• Voltage: *Not all options are applicable to all models
• CCT: 3000K, 4000K, 5000K
• Frequency: N/A
• Beam Angle: N/A
• Weight: N/A
• Housing Material: N/A
• Dimmable: Yes
• Average Lifetime: 50000 hrs
• Lumens: 8600 LM
• Moisture Rating: IP65
• CRI: 80+
• Usage: Outdoor
• Power Factor: >90
• Warranty: 7 Years

Product Usage Instructions

Before You Start

Safety Information: To reduce the risk of fire, electric shock, or physical injury, please review all instructions carefully prior to installation.

Quickstart Guide:

1. Open fixture and remove cover.
2. Drill through fixture’s mounting holes as desired.
3. Connect the corresponding wires.
4. Adjust the constant current, CCT, and wattage to desired levels.

Whats in the Box?

LED Wall Pack Get Your Gear

Before You Start

Safety Information
To reduce the risk of fire, electric shock, or physical injury:

• Turn off the switch and circuit breaker before installing this LED light fixture.
• This product should be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
• Use safety precautions and abide by related regional and local laws or regulations.
• Proper grounding is required to ensure safety.
• Suitable for use in wet environments.
• Do not use outdoors or mount near gas or electric heaters.
• Equipment should be mounted in locations and at heights where it will not be subject to tampering by unauthorized personnel.
• Check for damage during shipping prior to install. If the product is damaged, do not use it.
• To ensure efficient light, regularly clean the light panel. Do not clean with harsh solvents.
• Not compatible with occupancy sensors.
• Not compatible with third party sensors.
• Not compatible with timing devices.

WARNING:
Cancer & Reproductive Harm- www.P65Warnings.ca.gov

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.

Quickstart Guide

Installation Guide

STEP 1

• Turn off the circuit breaker for the location where the wall pack will be installed. Make sure the area is well lit by sunlight if the dawn to dusk sensor is going to be used.
• Install a compatible junction box (optional, not included).

STEP 2

• Unscrew the top three screws from the lens, allowing you to remove it. The lens may spring forward.

STEP 3

• Drill (b)out the holes you will be using to connect the wall pack to the junction box. If you are not using a junction box, drill out the top two outer holes in the circle.
• Use the bubble level to ensure the up arrow is properly aligned with the ground.

STEP 4

• Thread the cables through the cable ports and connect the wall pack wires to the wall power.
• Before mounting the wall pack, unscrew a cable port. There is one above the junction box and one on either side.

STEP 5

• Secure the wall pack to the junction box or wall using conduit for protection. Thread the cables through the cable ports. Connect the wall pack wires with the wall power: black (live) to black, white (neutral) to white, and yellow/green (ground) to green. If a 0-10V dimmer is used, connect the violet (+) to violet and pink (-) to pink. ( Dimming wire does not apply to WP_DD-BR)

STEP 6

• Adjust wattage and color temperature to your liking.

  • Junction box:
    Secure the wall pack to the junction box.

  • Non-junction box:
    Secure the wall pack to the wall. We recommend using conduit for wall packs to protect the cables with a water resistant seal.

STEP 7

• Adjust wattage and color temperature to your liking (options vary by model). You may want to restore power for this step, but be careful of the bright LEDs.

• Reattach the lens by hooking it under the metal loops and then installing the screws.

Product Details

Recommended Dimmers

WP_DD_60SW-BR-3050K Specifications

WP_DD_80W-BR Specifications

WP_DD_120SW-BR-3050K Specifications

WP_BR-3050K Specifications

WP_DD-BR Specifications

| Voltage| 120V-277V| Average Lifetime| 50000 hrs|
---|---|---|---|---|---
| Country of Origin| Vietnam| Moisture Rating| IP65|
| Frequency| 50/60 Hz| CRI| 80+|
| Weight| 5.06 lbs| Usage| Outdoor|
| Housing Material| Aluminium Alloy| Power Factor| >90|
| Dimmable| 0-10V| Warranty| 7 Years|

Common Troubleshooting

Feeling in the dark about an issue with your product? No worries! Our troubleshooting section is here to shed some light and provide you with easy- to-follow solutions for any problem. If you still need some assistance, please feel free to contact us with any questions. Our team of lighting experts are happy to help brighten your day.

Light Distribution Angle

Lighting distribution angle refers to the spread of light emitted from a light source. It is an important factor to consider when selecting a fixture or bulb, as it affects the way it will illuminate an area.

There are two main types of lighting distribution angles: A symmetric lighting distribution emits light evenly in all directions, creating a cone- shaped pattern that provides a pool of light. This type of lighting is ideal for general lighting and illuminating large areas. Common applications for symmetric lighting include general area illumination, security lighting, and perimeter lighting. Symmetric lighting is also used to a certain degree in up- lighting. An asymmetric lighting distribution angle, also known as beam angle, creates a pattern that focuses light in a specific direction. This type of lighting is ideal for task lighting as it reduces glare and light spill in other areas. Common applications include task lighting in spaces such as landscape settings, retail stores, museums, and much more. It is important to note that the lighting distribution angle can also be affected by other factors such as the reflector design of the light source, the type of lens used, and the distance between the light source and the surface being illuminated.

Customer Support

Warranty Policy
This product is covered by our industry leading 7 year warranty. It gets even better – scan the QR code for 2 extra years of protection!

30 Day Return Policy
At Sunco, we value our customers and stand by the quality and performance of our products. If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date.

Customer Service
Our Los Angeles team of lighting experts is here to assist you with all your needs!

Contact us at:

• Email: support@sunco.com
• Call or Text: 844-334-9938

Frequently Asked Questions (FAQ)

Q: Is the LED Wall Pack dimmable?
A: Yes, the LED Wall Pack is dimmable.

Q: What is the average lifetime of the LED Wall Pack?
A: The average lifetime of the LED Wall Pack is 50000 hours.

Q: What is the warranty period for the LED Wall Pack?
A: The LED Wall Pack comes with a warranty of 7 years.

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>