Wilo Plavis Condensate Pump Instruction Manual

: June 5, 2024
: wilo

Table of Contents

Wilo Plavis Condensate Pump
Dimension
Parts
Operation
About this document
Safety
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wilo Plavis Condensate Pump

Wilo-Plavis-Condensate-Pump-product

Dimension

Wilo-Plavis-Condensate-Pump-fig-1

Wilo-Plavis-Condensate-Pump-fig-2

Parts

Wilo-Plavis-Condensate-Pump-fig-3

Operation

Wilo-Plavis-Condensate-Pump-fig-5

Wilo-Plavis-Condensate-Pump-fig-6

Wilo-Plavis-Condensate-Pump-fig-7

About this document

The language of the original operating instructions is English. All other languages of these instructions are translations of the original operating instructions. These installation and operating instructions are an integral part of the product. They must be kept readily available at the place where the product is installed. Strict adherence to these instructions is a precondition for the proper use and correct operation of the product. This installation and operating instructions correspond to the relevant version of the product and the underlying safety standards valid at the time of going to print. EC declaration of conformity: A copy of the EC declaration of conformity is a component of these operating instructions. If a technical modification is made on the designs named there without our agreement, this declaration loses its validity.

Safety

These operating instructions contain basic information which must be adhered to during installation, operation and maintenance. For this reason, these operating instructions must, without fail, be read by the service technician and the responsible specialist/operator before installation and commissioning. It is not only the general safety instructions listed under the main point “safety” that must be adhered to but also the special safety instructions with danger symbols included under the following main points. General danger symbol Danger due to electrical voltage Note

Personnel qualifications
The installation, operating, and maintenance personnel must have the appropriate qualifications for this work. Area of responsibility, terms of reference, and monitoring of the personnel are to be ensured by the operator. If the personnel are not in possession of the necessary knowledge, they are to be trained and instructed. This can be accomplished if necessary by the manufacturer of the product at the request of the operator.
The danger in the event of non-observance of the safety instructions
Non-observance of the safety instructions can result in a risk of injury to persons and damage to the environment and the product/unit. Non observance of the safety instructions results in the loss of any claims to damages. In detail, nonobservance can, for example, result in the following risks:
- Danger to persons from electrical, mechanical, and bacteriological influences,
- Damage to the environment due to leakage of hazardous materials.
- Property damage
- Failure of important product/unit functions
- Failure of required maintenance and repair procedures
Safety consciousness on the job
The safety instructions included in this installation and operating instructions, the existing national regulations for accident prevention together with any internal working, operating, and safety regulations of the operator are to be complied with.
Safety instructions for the operator
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- If hot or cold components on the product/the unit lead to hazards, local measures must be taken to guard them against touching.
- Guards protecting against touching moving components (such as the coupling) must not be removed whilst the product is in operation.
- Leakages (e.g. from the shaft seals) of hazardous fluids (which are explosive, toxic, or hot) must be led away so that no danger to persons or to the environment arises. National statutory provisions are to be complied with.
- Highly flammable materials are always to be kept at a safe distance from the product.
- Danger from electrical current must be eliminated. Local directives or general directives [e.g. IEC, VDE, etc. and local power supply companies must be adhered to.
Safety instructions for installation and maintenance work
The operator must ensure that all installation and maintenance work is carried out by authorized and qualified personnel, who are sufficiently informed from their own detailed study of the operating instructions. Work on the product/unit must only be carried out when at a standstill. It is mandatory that the procedure described in the installation and operating instructions for shutting down the product/unit be complied with. Immediately on the conclusion of the work, all safety and protective devices must be put back in position and/or recommissioned.
Unauthorized modification and manufacture of spare parts Unauthorised modification and manufacture of spare parts will impair the safety of the product/personnel and will make void the manufacturer’s declarations regarding safety. Modifications to the product are only permissible after consultation with the manufacturer. Original spare parts and accessories authorized by the manufacturer ensure safety. The use of other parts will absolve us of liability for consequential events.
Improper use
The operating safety of the supplied product is only guaranteed for conventional use in accordance with Section 4 of the operating instructions. The limit values must on no account fall under or exceed those specified in the catalog/datasheet.