KUAREZ RD4000 LED Grow Light 2.4G Wireless Remote Controller User Manual

KUAREZ RD4000 LED Grow Light 2.4G Wireless Remote Controller User Manual

Important Safety Instructions

1. CAUTION: Do not look directly at the LED grow light when the lighting equipment is working.
2. CAUTION: The minimum required distance between adjacent led grow light is 4 inches(10cm) and between the led grow light and combustible materials is 40 inches(100cm) such as walls, ceiling, movable, partitions. Providing this installation limitations are needed to prevent overheating of led grow light or combustible materials within the installation environment.
3. The maximum temperature of the installed environment(ambient temperature) should ensure safe operation of the led grow light. So you will need to control the temperature within the installed environment. (Example: a mechanical ventilation or cooling system is required to maintain the temperature within the growing space below 104°F(or 40℃) when the led grow light is in operation).
4. Instructions to the installation of cords:
   • a. Do not conceal or extend cords through a wall, floor, ceiling, or other parts of the building structure,
   • b. Do not place cords above the suspended ceiling or dropped ceiling,
   • c. Do not permanently affixed cords to the building structure,
   • d. Are routed so that cords are not subject to strain and are protected from physical damage,
   • e. Make the cords are visible over their entire length during installation.
   • f. Cords should be used within their rated ampacity as determined for the maximum temperature of the installed environment specified in the instructions.
5. The led grow light is for indoor use only, avoid exposing the lamp to water for too long time.
6. CAUTION: For horticulture lighting structures, installation shall be performed by qualified personnel, and that the structures and intended for installation subject to approval by the authority having jurisdiction.
7. Set up your light in the operating environment that with adequate air circulation. Never push objects into the ventilation openings.
8. When using this light, there is no need for any extra ballast.
9. When cleaning the outside of your light and its components, you need to shut off your light firstly, then unplug the power cord. Using a clean, soft, lint-free cloth to wipe the light. Avoid getting moisture or damage on any openings.
10. CAUTION: Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. Maybe harmful to the eyes.

Wireless Remote Controller Usage Instructions

| Turn on     Turn off

Click OFF button to turn off the light for saving the current status of brightness, and then turn on the light, the previous brightness saved will be displayed by default.

---|---
| Click corresponding button to set the certain brightness, 10 levels of brightness for your choice as photo.

| All lights which were matched code to this remote controller will be selected.
E.g: press button ALL then press button OFF, all the lights matching code to this remote controller will be turned off.
| Group selecting buttons

1. Before grouping lights, the procedure of matching the code needs to be completed firstly.
2. Unplug the lights, keep pressing the group selection button, then plug the lights and 3-5s later the light will flash, release the group selection button to finish grouping. This procedure of grouping lights is suitable for lights under both status of ON and status of OFF.
3. This function aims to control the lights in different area separately, when you need to control the lights in same group, press the group selecting button firstly. E.g: press button 2 and set 30% intensity, then the intensity of all the lights grouping to Group 2 will be 30%.

| Matching the code for light

1. If the light is under the status of ON, unplug the light and long pressing the ‘ID’ button to keep the controller’s indicator on, then plug the light and release the ‘ID’ button after the light flashes, the code-matching succeed.
2. If the light is under the status of OFF, we need to wait for 15s firstly after unplug the light, then follow the next procedures of matching the code as above.

Kindly Note:

1. The light has a power-off memory function, it saves the last status before power off, includes the OFF status or any status of the brightness you chose. (When turn off the light, and unplug it, the light will keep the OFF status, then plug it, you need to click ON button to turn on the light.)
2. The setting defaulted by factory of the light is 100% of brightness, when plug the light, it will display 100% of brightness at the first time.
3. The barrier-free and interference-free distance between the light and the remote controller should be less than 25m, matching code for several lights simultaneously is available, then you can use one remote controller to control several lights.
4. The light and the remote controller which are in one package has completed code matching, if you would like to use this remote controller to control other lights(KUAREZ brand and RD series lights), firstly, you need to complete the code-matching between the controller and other lights.

Installation

How to install your LED grow light?
Note: Power off the light before installation

• RD1000 Installation Steps

  • 
  • 
  • • 

• RD2000 and RD4000 Installation Steps

  • 
  • 
  • 
  • 

• Step 1: Fix the lifting device(rope hanger) on suitable place.

• Step 2: Fix the hanging kits/chains on back of the light.

• Step 3: Connect the hanging kits/chains to the lifting device(rope hanger).

• Step 4: Connect the power cord, and then power on the light.

RD1000 Display

RD1000 Specification

LED Qty

| 318pcs SMD LEDs| Vegetative Coverage|

2.5×2.5ft at 18”

Actual Power Draw

| 100W±5%| Flowering Coverage| 2x2ft at 14”
Input Voltage| AC100-277V| Housing Dimensions|

11.8 x 10.6 x 2.3 inches

Frequency

| 50-60Hz| Item Wieght| 3.5 lbs
Working Temperature| -20-50℃| Lifespan|

_ 50,000 hours

Package Includes

|

1X RD1000 LED Lighting, 1XRemote Controller, 1X 6ft Power Cable, 1X Hanging Kit 1X Rope Hanger, 1X User Manual, 2 X 1.5V AAA Battery

Using Suggestions

RD1000

| Height (above plants’ canopy)| Brightness| Using Hours
---|---|---|---
3-5 days Acclimation Period| 24”-28”| 40%|

10 on /14 off

Seeding’s /Young Vegetative

| 20”-24”| 60%|

12 on / 12 off

Vegetative Stage

| 16”-20”| 100%| 18 on / 6 off
Flowering Stage| 12”-16”| 100%|

12 on / 12 off

RD2000 Display

RD2000 Specification

Cable, 2X Hanging Chain, 2X Rope Hanger, 1X User Manual, 2 X 1.5V AAA Battery

Using Suggestions

RD2000| Height (above plants’ canopy)| Brightness| Using Hours
---|---|---|---
3-5 days Acclimation Period| 28″-32″| 40%| 10 on / 14 off
Seedlings/Young Vegetative| 24″-28″| 60%| 12 on / 12 off
Vegetative Stage| 20″-24″| 100%| 18 on / 6 off
Flowering Stage| 16″-20″| 100%| 12 on / 12 off

RD4000 Display

RD4000 Specification

Cable, 2X Hanging Chain, 2X Rope Hanger, 1X User Manual, 2 X 1.5V AAA Battery

Using Suggestions

Friendly Reminder: Since different plants have different needs, there will be no perfect answer to the exact hanging height and brightness. Please always keep an eye on your plants reaction, and adjust the light to the suitable hanging height and brightness.

Warranty Terms

Your KUAREZ LED grow light is offered 36 months warranty time and the light is warranted against original defects in materials and workmanship for a period of 12 months from the date of purchase. This warranty provides all labor and any replacement product or part necessary to ensure your light is in proper operating condition during the warranty period. A dated proof of purchase is required at the time of warranty service. The replacement of any part of your product under warranty will not extend the period of the warranty. If there is any problem with the item, please kindly send email to us: SUPPORT@HI- KUAREZ.COM.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>