Haining Zhongyuan Plastic ZYPS-R004 LED String Light Instructions
- June 5, 2024
- Haining Zhongyuan Plastic
Table of Contents
Haining Zhongyuan Plastic ZYPS-R004 LED String Light Instructions
Remote control and button functions
Remote control panel
Function Description
-
8 static modes:White,red,orange,green,cyan,blue,purple,pink.
-
5 thematic modes:
Red,white;Red,white;Red,white;…(Representing Victory Day); White,red,purple,pink;White,red,purple,pink;…(Representing Easter); Orange,purple;Orange,purple;Orange,purple;…(Representing Halloween);
Red,green;Red,green;Red,green;…(Representing Christmas); White,red, orange, green, cyan,blue,purple,pink;White,red,orange,green,cyan,blue purple,pink;…(Representing eight Colors) -
The MODE key has 4 modes:static,flashing,breathing and horse-racing,which can be cycled through in a selected monochromeor
theme mode. -
Brightness adjustment: stepless adjustment;dynamic and static both support brightness adjustment.
-
Timing function: 3H,6H,9H.3 kinds of timing options,automatically turnoff when the timing is up;clear the timing when the switch state changes.
-
Code matching: If the two buttons and the “ON” key of the remote control
are pressed simultaneously and long press until the green light
flashes,which represents successful matching. -
Timer key: When the timer key is pressed successfully,the green light flashes, otherwise it means the setting has failed. The timer will be cleared when the switch state changes.
-
When the button is pressed,the red LED1 indicator lights up, and the transmitter part of the controller works and sends out a wireless 433 signal. When the button is released, the LED1 indicator light is off,and the wireless signal stops transmitting.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However,there is no guarantee that interference will not accor in a particular installation.if this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.