Auverte FS101 PIR Motion Sensor User Manual
- June 5, 2024
- AuVerte
Table of Contents
Model: FS101
FS10x PIR Motion Sensor
User Manual
FS101 PIR Motion Sensor
Benefits
- Motion sensing as part of room occupancy detection solution
- Wireless communication to room automation equipment
- Simple to use – simple to maintain
- True IPv6 IoT connectivity to all devices
- Low cost
- Ten-year warranty
- Powered by CR2477 lithium coin cell battery lasting 5 years
- Designed for end-of-life product recoverability
Models
- Motion sensor
- Motion sensor with temperature and humidity sensor
- Black and white housing colors
The FS10x PIR (passive infrared) motion sensor from AuVerte is part of a
modern room automation solution and is a key element to determine the
occupancy status of an enclosed space. Tracking the passive heat given off by
building occupants and using encrypted wireless communication provides for a
high degree of data privacy. Battery-powered and utilizing wireless RF
communication, this sensor is simple to install and to maintain.
In a large or complex room layout, multiple FS10x motion sensors can be linked
together. All FS10x motion sensors store 90 minutes of motion history for
advanced data analytics and auto-configuration algorithms.
C5xx Ondur Thermostat| GK101 Optical Door/Window Sensor| GK104 Aux.
Temperature/Humidity Sensor
---|---|---
| |
Specifications
Sensors
| Motion Sensor | PIR (Passive Infrared) |
|---|---|
| Motion Sampling | Latching and sampled once per 1000 milli seconds |
| Low-battery sensor | Measures and reports battery voltage to support |
applications that signal low battery conditions.
Temperature sensor(FS102 model)| 10 °C to 35 °C, accuracy +/- 1 °C
Humidity sensor (FS102 model)| 0%RH to 100%RH non-condensing, accuracy +/- 2%
Radio
| Standard | IEEE 802.15.4 |
|---|---|
| Frequency band | ISM 2.4 GHz |
| Interference immunity | DSSS (Direct sequence spread spectrum) |
| Data rate | 250 kbps |
| Antenna | Build-in |
| Indoor range | Up to 50 m (150 ft) |
| Transmit power | +3 dBm |
| Receiver sensitivity | -95 dBm |
| Channels | 16 (11 to 26, default 25) |
| Protocol | AuVerte mesh |
IPv6 over 802.15.4 with forwarding error correction (FEC-ECC) via proxy
Software
| Encryption | AES128 |
|---|---|
| Routing | UDP over AuVerte Rf mesh and through an IPv6 proxy device |
| Cyber security | Packet authentication, configurable encryption keys with no |
backdoors
Motion history| 90 minutes
Device
Power| CR2477 3V/1000mAh coin-cell (not included) Approved battery vendors:
• Panasonic
• Mitsubishi
• Murata
---|---
Battery life| 5 years
Mounting| Surface mount, double-sided adhesive tape. Corner mount double-sided
adhesive tape or screwed.
Environmental and Physical Specification
| Dimensions | 48.8mm x 28.5mm x 19mm |
|---|---|
| Weight | 0.025 kg, 0.85oz (incl. battery) |
0.014 kg, 0.49oz (without battery)
Operating temperature| 10 °C to 40 °C (50 °F to 104 °F)
Storage temperature| -20 °C to 70 °C (–4 °F to 158 °F)
Operating humidity| 10 % to 95 %RH, non-condensing
Storage humidity| 5 % to 90 %RH, non-condensing
Electromagnetic emissions| FCC Part 15 Class A
EN 62311 (EMR)
ETSI EN 300 328 (2.5GHz ISM Band)
ETSI EN 301489 (EMC)
Safety approvals| EN 60950
Environmental| RoHS
Cleaning| Mild cleaning liquid, soft towel
Recycling| 7.5g ABS 6,5g electronics, 10.5g battery
Ordering Information
Part numbers| 003004.FS101 (motion only)
003004.FS102 (motion, temperature, and humidity sensor)
---|---
Package content| 6 FS101 (or FS102) motion detectors, and 6 corner mounting
holders.
Color Options|
- White
- Black
Options| None
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Version 1.02
- 28 May, 2020
- AuVerte AG
- Rothusmatt 14, CH-6300 Zug, Switzerland
- www.AuVerte.com
AuVerte AG
Rothusmatt 14
CH-6300 Zug
Switzerland
www.auverte.com
© AuVerte AG