Dongguan TAC-117A Car Fast Wireless Charger User Manual
- June 5, 2024
- Dongguan
Table of Contents
Dongguan TAC-117A Car Fast Wireless
**Charger User Manual**
Please read the instructions carefully before using.
Pictures are for reference only, Specifications are subject to the physical
product
What is included:
Features:
- Car holder with wireless charging fuction, charges your phone conveniently when driving
- Power output 10W, compatible with all phones with QI standard.
- Full 360 degrees rotation for perfect viewing angle.
- Start charging once as the phone contact with the holder, no need cable anymore.
- Fix foot support to fit any size of phone, much convenient for use.
- QC 3.0 USB car charger included so you can start charging readily, with over temperature, over current, over voltage muti-safety protection.
Compatible devices:
-
Work well with:
Samsung Note 8, Note 9, iPhone XS MAS, Huawei P30 Pro, MIUI9, Samsung S10+, iPhone 8PLus, Samsung S9+, Samsung S8+, iPhone XR, Samsung S10, Samsung S7edge, Samsung S8, iPhone XS, iPhone X, Samsung S9, iPhone 8 -
Also work with all other Qi enabled devices.
-
Qi disabled devices with wireless receiver or wireless charging case.
（Require receiver compliant with WPC Qi standard to match).
Parameters:
Infrared Sensor Wireless Charger Holder
Air Vent Mount
There are three levels of locking for different size AC vent blades.
Product specification:
LED Mode:
Attentions:
- Please use the product correctly according to instructions
- Please do not disassemble the product or throw it to fire and water, to avoid leakage caused by electrical short circuit
- Please do not use wireless charger in high temperature, wet, corrosive environment, to avoid leakage from caused by damaged circuit
- Please do not put wireless charger close to cards with magnetic stripes or chips (ID card, credit card etc.) to avoid demagnetization
- Please keep wireless charger at least 20 CM distance away from implantable medical device (heart pacemaker, Implantable cochlea etc.) to avoid potential interferences
- Please do safekeeping, do not let your kids treat wireless charger as toy to avoid unwanted accidents
- The pictures only supplies the reference, please take the actual product as the standard
-
Insert the adjuster into the ball joint adapter.
-
Insert the ball into the socket at the back of bracket and tighten.
-
Insert the mount directly into the car air vent blade, set the locking switch to proper position.
-
Connect the cable micro head to your charge holder.
-
Connect the other end to car charger, then insert the car charger to car cigar lighter.
-
Press the switch which behind the bracket, open the bracket.
-
Press the clamping arm and the phone starts charging.
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC Radiation exposure limit set forth for
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>