Shenzhen Shadow Crown Technology YG231 LED Projector User Manual

YG231 LED Projector

NN

NN

1 Safety notice
1.1. Please read Manual carefully before you use the projector.
1.2. To ensure stable power supply, please use national standard power cable and power cord with grounding.
1.3. Please use the same power voltage as the projector marked.
1.4. Please do not open the projector, other wise the supplier will not afford warranty service.
1.5. Do not look directly at the projector lens while the machine is working to avoid damage your eyes.
1.6. To avoid clog of the projector vent, please do not cover with cloth, carpet and other materials.
1.7. This projector does not have waterproof function, please keep it away from rain,moisture and other items containing liquid such as vase, cup, etc.
1.8. To avoid electric please keep the projector away from rain or water or moisture.
1.9. And cut off the power supply if do not use this project for a long time.
1.10. Use the originally foam or other unit-shock material to protect projector, if you need transport this projector.
1.11. If you find the projector have problems, please contact with the supplier, do not repair by yourself.
1.12 To extend the projector life span and protect your eyesight, we suggest you may have a break after 3-4 hours using.
Maintain Indication: 1-year warranty from factor y, for more warranty information, please contact with supplier (warranty service is not including the frame, manual, package, and some subjective idea about the video, sound, image aspects).

2 Interface introduction

1HDMI input slot 2USB input slot 3IR receiver 4DC Power input

5AV input slot 6Earphone slot 7Micro USB(5V/2A) 8Switch of battery’s power 9Micro SD card slot

Left Down Right OK

Power Return switch

Lens

Manual focus

3 Remote control introduction

Power FR UP
Left OK Return Vol-
Menu/ shortcut

Play/Pause Mute FF
Right Down Signal Source Vol

4 Media connection
4.1. Media input slot connection Connect the USB/Micro SD drive with the content to the projector USB/Micro SD por t, select “Media”, you can select movies, music, photo, text on the list.
MultiMedia Input Source Setting

Movie

photo

*NOTE: 1. To avoid power shortage, please do not mix use the
old and new battery at the same time. 2. To avoid batter y leakage corrosion, if do not use remote
control for a long time, please take the battery out. 3. When using the remote control, please align the remote
control signal transmitter to the projector ‘ s infrared signal reception position.

Music

Text

Audio support MP3/WMA/OGG/AAC/FLAC/APE/WAV

Multi- Photo support

JPEG/BMP/PNG

media

Video support

3GP/AVI/MKV/FLV(FLV)/MOV/MP4/MPG/ VOB/MPG/RMVB/RM

Text support

TXT

4.2. HDMI equipment connection HDMI slot could connect to computer and all the device with HDMI slot. As connected, choose the option HDMI.

4.3 AV video equipment connection Use 3 in 1 cable video convert cable, connect projector AV slot, the connection method like the picture, as connected, choose the signal source video.

Suppor t formatNTSC / PAL

5 Miracast connection
Select the “miracast” in the channel interface and connect the phone to the Cast SSIDNETLNNK-E179Scan the QR code to access the home page of the miracast, or press “OK” on the remote control for three seconds to enter the WIFI setting interface. Also available: http://192.168.203.1, Set up the network and start using it. Af ter connecting to the WIFI router, the miracast will automatically switch to the miracast mode.
MultiMedia Input Source Setting

MultiMedia Input Source Setting

HDMI

MultiScreen AV

MultiMedia Input Source Setting

HDMI

MultiScreen AV

4.4 3.5mm audio device connection Could connect 3.5mm earphone and speaker equipment.

HDMI

MultiScreen AV

Cast SSID:NETLINK-E179
Non-LAN Cast Mode:Miracast/AirMirror

Password:12345678

QR code

WIFI Config Step1Phone connect to NETLINK-E179 Step2Scan the QR code
You can press the”OK”button for 3 seconds to enter the WIFI setting interface or Browserhttp://192.168.203.1 Step3Setting Cast and easy sharing

Android Phone-Miracast Guide
1.Enable miracast feature in Phone 2.Searching Cast SSID and connect
Windows10 PC-Miracast Guide 1.Enable Projector feature 2.Connect to wireless display 3.Searching Cast SSID and connect

IOS-AirPlay Guide
1.IPhone/MacBookconnect to WIFI router SSID
2.”Enable AirPlay 3.Searching Cast SSID and connect

TV CastDLNA-Guide
1.Phone Connect the WIFI router SSID 2.Open APP which supported TV cast 3.Enable TV castsearching Cast SSID 4.Connected and enjoy the vide

FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF exposure warning:
This equipment must be installed and operated
in accordance with provided instructions and
the antenna(s) used for this transmitter must
be installed to provide a separation distance
of at least 20 cm from all persons and must
not be co-located or operating in conjunction
with any other antenna or transmitter.
End-users and installers must be provide
with antenna installation instructions and
transmitter operating conditions for satisfying
RFexposure compliance.

5.1 Android mirroring Connect the phone to the Cast SSID:NETLINNK-E179 Enter- into the mirroring function of the mobile phone, search the mirroring device, directly connect to Cast SSID, and the mirroring is successful. Please ensure that the phone and projector are on the same network (the projector displays the Cast SSID in different names here, subject to the actual display).
5.2 IOS miracast Enter into the control center on the IOS deviceclick “miracast” Select the corresponding miracast SSID, click the SSID and connect. After successful connection, the screen is projected onto the same screen and the connection status is displayed on the phone. Please make sure that the iOS device and the projector are on the same network, or connect the projector to the wifi inter face of the iOS device to Cast SSID: Netlinnk-E179 (the Cast SSID of the projector is different here, depending on the actual display).
5.3 Windows10 mirroring Computer WIFI connect to Cast SSIDNETLINNK-E179 Find “Projection” in the computer function list and click “Connect to wireless monitor”, search for Cast SSID of this screen and click “Connect”. * Please ensure that the computer and projector are on the same network (the projector displays the Cast SSID in different names here, depending on the actual display).

6 Projector connection introduction
6.1 Connection introduction

6 Setup menu
6.1 Picture setting Open the home page–“Setting”,find the picture setting, you can set up the projection mode, image scaling, aspect ratiopicture mode of the projector.

MultiMedia
Picture Setting

Input Source

Setting

Projection… Image scaling Aspect Ratio System Setting

Picture Mode

OSD Language Software Up… Factory Reset… Auto Sleep

6.2 System setting Open the home page–“Setting”,find the system setting, you can set up the OSD language,software update, factor y restore,auto sleep of the projector.

MultiMedia
Picture Setting

Input Source

Setting

Projection… Image scaling Aspect Ratio System Setting

Picture Mode

OSD Language Software Up… Factory Reset… Auto Sleep

7 Image focus
Put the projector vertical to the projector screen or white wall, adjust the keystoneuntil the image clearly enough,then the focus is finished.During the focusing,you could display video the menu while adjust the focus.
Manual focus

9 Built-in battery power supply (Available for models with built-in battery only)
Fiddle with the button to “on”, then projector will be charged by built-in batter y. In this situation, projection brightness will be a little lower. Battery symbol will appear on projection screen to indicate the remained power volume. *It takes about 3 hours for charging.
10 Switch of battery’s power
This switch is only available for the battery built-in version.

*Could connect multi-device and applications.

11 Technology Features

11.1 Basic parameters

Imaging technology Resolution Hightest resolution Light Operation mode Projection distance Projection ratio Aspect ratio
Power supply
Input Output Net weight Unit size

TFT LCD 640360 19201080 LED Manual operation 1.5–5M 1.62:1 16:9

Standard

Adapter:12V-2.5A

Adapter:12V-3A

Built in battery

Lithium battery:7.4V/1600mAh

HDMI/USB/Micro SD/AV/Micro USB

Earphone

0.5kg

117.8133.494.9mm

User Manual
Due to continuous improvement, actual product may different from the manual, manual is for reference only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>