Dongguan G02RX G02 Wearing game headphones User Manual

Operating Instruction
Wearing Instruction
G02

Earphone specification

Model…………………………………………… G02
Earphone battery capacity……………… lithium battery 3.N/1500mA
Working hours………………………………… about 17 hours (70% volume)
Charging duration……………………………. about 4 hours
Standby time……………………………………. 200 hours
Input charging standards…………………. USB-TYPE-C, DC5V/2A
Frequency response………………………….. 201-lz-20KHz
Sensitivity ………………………………………….100±3dB@lkHz
M IC sensitivity………………………………….. 38±3dB@IkHz (single directivity)
Effective distance………………………………….. Direct transmission distance of about 10m

Wear instructions

Stretch and adjust wearing position

Overview

A. Earphone
B. The button for startup and shutdown
C. TYPE-C interface
D. Location hole
E. Charging hole
F. 3.5mm microphone interface
G. Audio cable interface
H. Microphone mute button
I. Volume adjustment
J. Removable microphone
K. TYPE-C charging line
L. Audio cable
M. Adaptive emitter
N. Charging

*Operating Manual of Adaptive Emitter Insertion

Earphone charging

We suggest full charging of earphones before first use; LED light on earshield would display charging state upon connection of charging line.

• Charging method 1
  Charging time: Normal charging time of the battery lasts for about 4 hours; Charging indication: The Red indicator light is constantly on upon charging of earphone; The Red indicator light is off after full charging of the earphone.
  Put earphones in the charging seat for charging
  * Charging method 2

ON/OFF
Starting up : When the earphone is in a shutdown state, keep a long press of the startup & shutdown button for 3s. Blue status lamp flashes after hearing the startup prompt tone.
Shutdown : When the earphone is in startup state, keep a long press of the startup & shutdown button for 3s. The blue status lamp is off after hearing the startup prompt tone.

Earphones pairing

Earphone and USB wireless adapter can be used after pairing and delivery. If the earphone isn’t paired, manually pair again as per the following steps (suggest contacting technical personnel before re-pairing to judge whether it is necessary to implement this operation)

1. Switch off earphones;
2. Unplug USB wireless transmitter for reinsertion;
3. Switch on earphones again as per the startup method;
4. The blue LED of the adapter is constantly on, indicating a successful connection.

Earphone connection (wired)
The earphone can be used as a wired earphone together with an attached 3.5mm audio cable. Earphones shall be used in wired earphone mode:

1. Connect 3.5mm earphone line to earphone port.
2. Insert a 3.5mm earphone line into the device.

Precautions: Wireless connection is off when inserting a 3.5mm earphone line, and the earphone terminal is at a shutdown state.
Earphone connection (PC)
How to connect the wireless earphones to a PC:

1. Insert the wireless emitter into the USB connector of the PC. The status lamp of the wireless receiver would flash, indicating waiting for a connection.
2. Keep a long press of the earphone’s power button for 3s to switch on.
3. The status lamp of the wireless transmitter and the blue lamp on the earphone ear shield is constantly on, indicating the earphone has been connected smoothly.
4. If you use this earphone for the first time, you need to set earphones as the pre-defined input and output devices.

Connection of charging seat (PC)

How to connect charging seat to PC:

1. Insert the USB plug of the charging seat into the USB port of the PC. The status lamp of the wireless receiver would flash, indicating waiting for a connection.
2. Remove the earphone, and keep the long press of the earphones’ power button for 3s to switch on.
3. The status lamp of the wireless transmitter and the blue lamp on the earphone ear shield is constantly on, indicating the earphone has been connected smoothly.
4. If you use this earphone for the first time, you need to set earphones as the pre-defined input and output devices.

*Earphone usage method 2

Earphone Windows

If you use earphone for the first time, earphone shall be set as the default input and output device.

1. Right-click the loudspeaker icon on the taskbar, then select the “play device”.

2. Right-click the “SIBERIA -G02 device”, then select ” set as the default device” and then the G02 wireless earphone can be used

3. Right-click the “SIBERIA -G02 device”, then select ” set as the default device” and then the G02 wireless earphone can be used

Connection and configuration of earphones (PS4′” and PS4T”Pro)
Use earphones and PlayStation”14 “PS4.””” under wireless status.

1. Open your PS4TM game machine
2. Connect the wireless adapter to the USB port on P54TM. The wireless adapter status lamp would flash, indicating it is waiting for a connection.
3. Keep a long press of the power button on the earphone for 3s to open it.
4. The status indicator lamp of the wireless adapter and ear shield LED of the earphone are constantly on, indicating the earphone has been connected.

After detecting the “G02 wireless earphone” device, configure PS4 as per the following steps

1. Navigate to the “setup” menu and select it.
2. Highlight the “device” menu option and select it.
3. Scroll down to “audio device” and select it.
4. Set “input device” as XIBERIA-G02 wireless earphones.
5. Set “output device” as XIBERIA-G02 wireless earphones.
6. Select “output to earphone” and “all audios”.

www.xiberia.net

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Pan 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– – Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>