JLAB IFCHJKSTUDIOGRYBLU6 Jbuddies Bluetooth Headphone User Guide
- June 5, 2024
- JLab
Table of Contents
JLAB IFCHJKSTUDIOGRYBLU6 Jbuddies Bluetooth Headphone
CONTROLS
-
BLUETOOTH PAIRING:
When power is off, PRESS&HOLD 10 SECONDS (Blue and red lashing lights will indicate JBuddies Studio Wireless are ready to pair to Bluetooth device) -
POWER ON/ OFF: PRESS & HOLD 3 SECONDS
(Slow blinking blue light indicates power is on) -
PLAY/ PAUSE / ANSWER / HANG UP CALLS: 1 CLICK
-
ACTIVATE sIRI(OS) OR “OK GOOGLE” (ANDROID): 2 CLICKS
-
RE-PAIRING AND ADDITIONAL DEVICES:
When power is off, PRESS & HOLD 10 SECONDS -
VOLUME UP/ VOLUME DOWN: 1 CLICK
-
TRACK FORWARD/TRACK BACKWARD: 2 SECOND HOLD
SHARE MODE
Connect the included AUX CABLE to either side to another JBuddies Studio or any other wired headphone/earbud for Share Mode.
CHARGINNG
Connect the Micro USB cable to computer or USB 5V 1A (or less) output device.
GO WIRED
Connect the AUX CABLE to a device for a wired connection.
US Compliance
FCC Information
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. Ihis equipment generates, uses and can radiate radio
trequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interterence to radio communications. However,
there Is no guarantee that interference wil not OCCur in a particular
instalation. if this equipment does cause harmful interterence to radio or
television reception, which can be determined by turming the equipment oft and
on, the user is encouraged to try to correct the interterence by one or more
of the following measures:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/IV technician for help.
lf you cannot eliminate the interference, the FCC requires that you stop using
your product. Changes or modifications not expressly by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
PEAG LLC
dba JLab Audio hereby declares that this device is in compliance wIth the
essential requirements and other relevant provisions of the RED directive. A
copy of the EU Declaration of Conformity is available at
jlabaudio.com/compliance
JLab Audio
2281 Las Palmas Drive, Suite 101, Carlsbad, CA 92011, USA
The symbol above indicates that this product and/or battery should not be
disposed of with household waste. When you decide to dispose of this product
and/or its battery, do so in accordance with local environmental lawS and
guidelines.
Battery Caution & Disposal Information
Please take care of your battery. Do not; disassemble, burn, puncture, crush
or bend your battery. Improper operation of the battery may product smoke. In
such an event, ventilate the area. Extinguish any flames with carbon dioxide,
dry-powder fire extinguisher, or cover with
sand or mud. Take care to avoid conditions of excessive moisture for prolonged
periods and do not immerse. Do not expose to temperatures above 50°C/122°F.
Charge battery fully before storage or if stored for longer than three months.
Disposal
At the end of its life, please take care to dispose of this product responsibly. Electronic products and batteries contain materlals that Can De narmrui to tne environment. FIease do not dispose to unsorted waste. Take your electronic waste to a designated collection or recycling facility to be recycled properly. Your local council authority will be able to tell you where your nearest tacilities are. Ihere may be one at your local supermarket.
Contact Us
If you’re unsatisfied with your purchase, please contact us and we’ll take care of you! You can contact our US based customer support team:
- Website: jlabaudio.com/contact
- Email: support@jlabaudio.com
- Phone U.S.: +1 405-445-7219 (M-Th 8am-5pm, F 8am-3pm PT)
- Phone U.K.: +44 (20) 3884 3322 (M-Th 1600-0100, F 1600-2300 GMT)
Visit jlabaudio.com/warranty to initiate a return or exchange
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>