altice SOUNDCUP Bluetooth speakers User Manual

SOUNDCUP Bluetooth speakers
User Manual

BLUETOOTH CONNECTION

Step 1 Power On
Long press master and sub-master “ simultaneously for 25, you will hear a prompt tone of power on. Then the speakers will be connected automatically with a beep sound and the indicator light of the sub-master will keep blue, the master indicator light will keep flashing.

Step 2 Choose the device
Find “2 in 1 Altice speaker” in your Bluetooth list and select it

Step 3 Pairing Success
The LED indicators on both speakers will keep blue once Bluetooth is paired and a beep sound will be heard. You can play music now.

TWS CONNECTION

Operation Instructions

1. Long press master and sub-master “ simultaneously for 2S to power on. Then the speakers will be connected automatically with a beep sound and the indicator light of the sub-master will keep blue, the master indicator light will keep flashing. (Please turn off Bluetooth on your device before TWS paired)

BASIC OPERATION

CD Power Button/Multi-function Button

• Long press 1 for 2s to Power On/ OFF
• Short press 1 to play/pause during music playing
• Short press 1 on the master speaker to answer/end an incoming call
• Short press 1 twice on the master speaker to reject a call
• Short press 1 twice to disconnect Bluetooth
• Short press 1 three times to disconnect TWS

Volume Button

• Short press 2 to turn the volume up/Long Press 2 to the next track
• Short press 3 to turn the volume down/Long press 3 to the previous track
• Short press 2 3 simultaneously to turn on/off flashing white LED during music playing

Note: Both speakers can be controlled mutually after being paired.
If you are not able to connect two speakers successfully, long press 2 3 simultaneously of each speaker for 3S to connect quickly.

INTERFACE INSTRUCTIONS

It will be powered off automatically if Bluetooth is unconnected for more than 10 minutes.

PRODUCT SPECIFICATION

FREQUENTLY ASKED QUESTIONS

Q: What kind of charger should we use for the speaker?
A: All common USB chargers can be used, while we suggest the ones above 5V/0.8A.

Q: What if there is noise or discontinuous sound when playing?
A: The speaker can be normally used within 10 minutes under a no obstruction environment.
If it is over 1 Om or with obstruction, there might be noise or discontinuous sound.

Q: Why will the speaker shut down automatically when it is working?
A: When there is no Bluetooth pairing for 10 minutes, the speaker will shut down automatically to reduce power consumption.

Q: The speaker cannot connect the once-paired cellphone.
A: First, remove the speaker’s pairing name from the cellphone’s Bluetooth list and then short press the power button twice quickly to restart paring mode.

Q: The speaker cannot be started up in a normal situation.
A: Please plug in the charger and try in a few minutes.

This speaker supports mobile phones and tablet PCs etc. Here this User Manual is illustrated based on mobile phones.

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,  the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which
  the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>