AIERBOZ YL-58A Electronic Lock User Manual
- June 12, 2024
- AIERBOZ
Table of Contents
AIERBOZ YL-58A Electronic Lock
OVERVIEW
FEATURES
- Can store up to 20 fingerprints for users
- Support Tuya APP Bluetooth acceptance,can share users
- Backlit keypad for use in low light
- Mechanical key open
- Deadlatch assembly with adjustable backset
- DIY installation (instructions included)
- Keyhole in front for more convenient use
LOCK COMPONENTS
- A : Outside knob
- B: Inside knob
- C: Latch assembly
- D: Power cable
- E: Mounting screw
- F: Battery cover
- G: Mounting screw
- H: Fingerprint collector
- I: Battery box
- J: Strike plate
- K: Wrought box
INSTALLATION INSTRUCTIONS
NOTE: We highly recommend watching the homepage video to installation.
Step 1. Mark Door
Using template, mark hole on both sides of door at required backset, then mark
latch hole on door edge. (Fig.1)
Step 2. Drill Holes
Bore a 2.13in hole on the door face, then drill 0.98 hole in the door edge to
intersect with the center of 2.13in hole. (Fig.2)
Note: Drill 2.13in the hole from both sides of the door to stop wood splintering
Step3. Install Latch
Insert the latch into the hole and mark a line around the edge of the latch
plate and remove the latch. Chisel approx. 0.12in deep or until the latch
plate sits flush with the door edge. (Fig.3a)
Note: The latch length can be adjusted. As shown in the figure, hold the position of the latch square hole and pull it back horizontally to select 2.36in or 2.75in. (Fig.3b) Insert latch then drill 0.8in x0.16in holes for mounting screws and fasten latch. (Fig. 3c)
Step4. Install Strike
Close the door and mark the horizontal center of the latch on to door frame.
Mark the vertical line where the door edge meets the frame and measure in half
of the door thickness to find the vertical center. (Fig. 4a) Extend both lines
until they intersect and drill a 0.98in hole to 0.6 in depth. Position the
strike plate and mark it around the edge. Chisel frame to approx 0.06 in-depth
or until strike sits flush. Drill 0.8in x 0.1 6in screw holes and fix strike
to frame. (Fig, 4b)
Step 5. Install Outside Knob
Feed the power cable through the latch and guide the spindle through until
outside rose sits flush.(Fig. 5)
Step 6. Install Inside Knob
Feed power cable through the hole in knob and guide spindle into the handle.
(Fig.6a) Screw the inside knob to the outside knob using mounting screws.
(Fig. 6b)
Step 7. Install the battery
Install 4 pieces LR3 / 1.5v/ AAA alkaline batteries into the battery box, and
install the † /-batteries in strict accordance with the arrow as shown in the
figure. The wrong installing + / – battery will make the product unable to
work, and will also lead to destructive malfunction.(Fig. 7)
Step 8. Install the battery cover
- Plug the power cord into the power socket as shown in the figure.
- Recycle the excess power cord into the hole.
- Install the battery cover in the orientation position and fasten 2 mounting screws. (Fig. 8)
RESET THE LOCK TO THE FACTORY DEFAULT
Method 1 Press the reset button
As shown in the picture, the reset button is located in the small hole on the
rear cover of the battery. Press and hold the reset button for 5 seconds with
something like a toothpick until ten beeps are heard. The product will be
restored to factory Settings, put into debugging mode. All data are cleared,
need to bind the phone again.
Method 2 Reset with Smart life / Tuya APP
User can reset the lock by removing the device on Smart Life or Tuva APP enter
the Smart Life or Tuva home page, choose “..” and then click “Device
Management” Last choose “Remove Device’. (Fig.1, 2)
SETTING UP WITH TUYA / SMART LIFE APP
The product does not have a password when it leaves the factory: can input any fingerprint (optional) to unlock before it binds to the mobile phone’s app. After the installation, please set up the lock according to the following instruction.
Steps to set up with Tuya or Smart Life APP
(1)Step 1 – -Search “SMART LIFE’ or ‘TUYA SMART APP. download, register, and
log in. Or by scanning the below QR code to download and install. (Fig1,2,3,4
)
(2)Step 2— Connect the lock to the mobile phone, SMART LIFE or TUYA APP with Bluetooth
- Turn on the Bluetooth. (Fig.5)
- Open the APP home page and select Add Device. (Fig.6)
- Choose camera and lock, one of which is Lock(BLE), and choose to enable Bluetooth network distribution.(Fig.7,8)
- Wait a while and the app will connect to the device. Make sure vour device is close to your phone during this time. (Fig .9)
- When the connection is successful, you will hear two beeps, and you will see a lock named ‘JB’, when you tap into the main screen of the lock, you will see a green tap and hold to unlock key. (Fig. 10, 11)
- You can set fingerprints to unlock it.(Fig.12)
Note: Solution of failure to add door lock device. For the door lock use safety, only one mobile phone is allowed to bind the door lock device. If the door lock device fails to be added, the door lock is proven to be invalid. May be bound by inspectors at the time of delivery. There is a reset key on the back of the lock body, which can be reset directly. After the reset, you can rebind.
Add members
There are 2 kinds of member ship, “family member” and “other member” can be
added as below Other Member. with the limit authorities. Family Member. with
all authorities to operate the lock.
Add “Other Member”
Note: This way to add “Family Member” is not recommended. For beginner of
the SMART LIFT or TUYA APP, mainly for user to add “Other Member” (Fig. 1,2,3
)
Add “Family Member”
- At the APP homepage, click “me”, and choose ” Home Management”. (Fig. 1)
- Choose a home or create a home.(Fig.2)
- Click “Add Member”. (Fig.3)
- Choose a app to send notification to family member. (Fig. 4)
- Family number will get a message about the invitation code. (Fig.5)
- Family members download the SMART LIFE APP, register and log in. Go to the interface, select “Home Management” and click “Join a Home” (Fig.6) (Note: Need to use the same app)
- Family member input invitation code, add a family member is finished. (Fig.7)
Family members can upgrade other members into family members. (Fig.1,2,3
)
CONNECT WIFI (OPTIONAL)
If only Bluetooth is used, the phone and lock need to be connected for a short distance, beyond which they will automatically disconnect. If there is a gateway in the room, it can be used at a longer distance. (Set up the WIFI gateway if user want to use the internet functions)
Note: Please use the WIFI gateway provided in the box or sold separately in our store or any other Tuya core WIFI gateway.
Step 1
Turn on the WIFI and Bluetooth on mobile phone. (Fig.1)
Step 2
Activate the WIFI gateway Power on the WIFI gateway and hold the button on the
back for 5s. till the indicator light on the gateway turn to the blue and
twinkle. (Fig.2)
Step 3
Add the WIFI gateway to the APP, and connect the WIFI gateway and the lock
.
- Choose your home, and add device (Fig.1)
- Choose the WIFI gateway,and input WIFI account and password.(Fig.2.3)
- User will see the WIFI gateway is added successfully, and choose done.(Fig.4)
- Select the ones that have been added wireless Bluetooth gateway, click up Add existing and choose JB. WIFI gateway and lock complete connection. (Fig.5,6.7,8)
Step 4
-
Connect to Alexa (The following websites are available for English translation
https://support.tuya.com/zh/help/_detail/K9psi68xxmmg0 -
Quick Guide of Using Amazon Echo to Control Smart Devices
https://developer.tuya.com/en/docs/iot/amazonechoguide?id=K9j6yq88a3msw
HOW TO USE THE LOCK
- Fingerprint Unlocking: Setting by Fingerprint Management, hold the fingerprint area of the lock and place the same finger on the fingerprint area several times, holding the same position for more than 5 seconds each time. Hold down the fingerprint to delete or change it. (Fig1,2,3,4,5,6)
Key Unlocking
Insert the key into the keyhole, rotate 180 degrees, and press down the handle
to open the door. If the key cannot be rotated after inserting, the key does
not match and the lock cannot be unlocked.
Bluetooth remote unlocking with mobile phone APP.
Passage Mode
Note: After the passage mode is enabled, the lock will remain in the
normally open state. When reading a fingerprint, the fingerprint collector
indicator is pink.
- Tip Voice ON/OFF (Silent Mode). (Fig1,2,3)
Battery Information
When the red light is on,the battery should be reploced with a new one within
a week to ensure the lock works property. The lock need to configure the four
AAA+ LR03+15V alkaline battery. In order to product for a longer time use for
you. Please do not use other types of batteries, or do not mix old and new
batteries.
Note: This door lock is not equipped with a USB charge for information
security, please replace the battery in time when the red light is not wise it
will bring the risk of not being able to open the door. If the red light
blinks four times, the battery is completely drained. The mechani- cal key is
the only way to open it in case the battery runs out. Please don’t lock the
mechanical key in the room.) Replace the Batteries: Remove the two screws
shown in the picture with a screwdriver, take out the battery box, and replace
the old batteries according to the positive and negative marks of the battery.
Then reinstall the batteries, and connect the voltage socket. The new batter-
les will + + provide you with about one year’s service.
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipm ent and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body.
ISED Statement
English: This device complies wit h Indus try Canada license-exempt RSS sta ndard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This d evice m ust accept any interference, including interference th at may c ause undesired operation of the d device. The digital apparatus c omplies with C Canadian CA N ICE S-3(B) /NMB-3(B). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>