Altice Labs Login Instructions

: June 9, 2024
: altice

Table of Contents

Altice Labs Login Instructions
Requirements to access the Altice Labs web interface
- Open your web browser and navigate to 192.168.1.1
How to configure your Altice Labs router
REFERENCE LINK
Read User Manual Online (PDF format)
Download This Manual (PDF format)

How To Login to an Altice Labs Router And Access
The Setup PageThe Altice Labs router web interface is the control panel for your router it’s where all the settings are stored and changed. To make changes to your network you’ll need to login to your Altice Labs router.

Requirements to access the Altice Labs web interface

Accessing the Altice Labs web interface is pretty straightforward and all you’ll need is:

Altice Labs router
access to the network, Either through LAN cable or through
Wi-FiA web browser, which you clearly have.

Following are the instructions to connect to your Altice Labs router’s interface for configuration and diagnostics.

Make sure you are connected to your Altice Labs router
To be able to reach the setup pages of your Altice Labs router, you’ll need to be connected to its network. So start by connecting to the network, either through WiFi or through an ethernet cable.
Tip: If you don’t know the WiFi password for your Altice Labs router, you can always connect to it with an ethernet cable, which won’t require a password.

Open your web browser and navigate to 192.168.1.1

Open your browser and type the router’s IP address into the address field. The most common IP for Altice Labs routers is: 192.168.1.1 If that IP address doesn’t work, you can search the default Altice Labs IP address list for your specific model
Tip: Since you’re already connected to your Altice Labs router, you can also use whatsmyrouterip.com to quickly find the IP. It is the “Router Private IP”-value.

Type the IP into the address field and press go

Enter the username and password for your Altice Labs router
In the username and password field, enter your current username and password and press enter/sign in. Default login credentials for Altice LabsIf you’re not sure about the username/password you can look at the default Altice Labs credentials to see what the defaults are, and how to reset them.- The credentials can also be printed on the label on the back of your router That’s it! You can now configure anything you want on the device.

How to configure your Altice Labs router

Once you have logged in to the Altice Labs admin interface you should be able to change any settings that are available. Be careful when you configure your router so that you don’t break the network. Tip: write down your current settings before changing anything so that you can revert it in case of trouble.

What if my Altice Labs router or network stops working after a configuration change
In case you by mistake make some change that breaks your Altice Labs home network, you can always go back to zero by following the generic 30 30 30 hard reset trick. This is usually the last resort, and if you still have access to the Altice Labs interface you can always log in to try and revert the settings first (This of course assumes you wrote down the original value before changing it).