Dongguan JSWQC017 Race Mini 10W Wireless Car Charger User Manual
- June 5, 2024
- Dongguan
Table of Contents
Race Mini 10W Wireless Car Charger
User Manual
A Spring-loaded clip
B Micro-USB input
C Wireless charging output
D Adjustable ball joint for tightening ring
Installation Instructions
Vent Mounting
Attach the product to your vent by pushing the spring-loaded clip (A) and
hooking it onto the back of the vent blades in your vehicle. Once hooked on,
release the spring-loaded clip to grip onto the vent.
Adjusting the viewing angle
Adjust the angle by loosening the tightening ring (D) of the ball joint on the
back of the product. Once you are happy with the viewing angle, tighten the
ring (D) to hold in place.
Connecting the power source
Take the included Micro-USB to USB-A cable and connect it to the Micro-USB
input (B) of the Race Mini wireless charger. Plug the USB-A end into the 12V
USB Car Adapter and plug it into your vehicle’s 12V power socket.
Charge your device wirelessly
To wirelessly charge your device, place it over the wireless charging output
(C), it should automatically begin to charge.
Product Specifications
| Name | Race Mini 10WWireless Car Charger |
|---|---|
| Item Number | JS-WQC-017 |
| USB-C Input | 5V/2A (10W) 9V/2A (18W) |
| Wireless Output | 5W, 7.5W, 10W (10W Max) |
| Total Output | 10W Max |
| FCC ID | 2AQAE-JSWQC017 |
| Frequency bands | 123.24kHz to 145.51kHz |
| Maximum output power | -10.72dBuA/m@10m |
Manufacturer: Dongguan City Jleshuai Electronic Co.. Ltd Address: No152, Liyatang Industrial Area, Lincun,Tang•xia Town, Dongguan•City, Guangdong Province, China
Troubleshooting
Not charging or slow charging Please ensure you are using the supplied power
adapter within the Race Mini wireless charger. Using other chargers may result
in slow charging or no charge at all. If you need to replace the power
adapter, please make sure it supports QC 3.0 and supports a 12V USB output.
For optimum charge speed, adjust your device so that it is aligned to the
center of the wireless charging output (C).
Please ensure that the case on your phone is not affecting the wireless
charging by removing it and checking the performance. Some cases interfere
with wireless charging if they contain metallic material or are overly thick.
Caution
- Do not disassemble or throw into fire or water.
- Do not expose to extreme weather conditions.
- Do not place close to a magnetic strip or strip card as it could cause magnetic failure.
- Please keep the charger a safe distance of at least 80cm from any implantable medical devices to avoid medical device interference.
- This is not a toy and should be kept away from children. 6. In the case of the device overheating, please disconnect immediately.
Please note that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. Cygnett takes no responsibility for damages caused by the incorrect
use of its products. Made in China.
This symbol on the product indicates that this product shall not be treated as
household waste. Instead, it shall be sent to the applicable collection point
for the recycling of electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences
for the environment and human health. For more information about the recycling
of this product, please contact your local city office.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
Cygnett warrants this product against defects in workmanship and material for
a period of two (2) years from its original purchase date. You must present
your receipt as proof of date of purchase for warranty validation. Please read
the following information carefully and retain this for any warranty claim.
Terms & Conditions
- This product is for household use only. If the product is used in a commercial environment, the warranty period will be automatically reduced to three (3) months.
- Cygnett warrants that, with normal use or service, the product will be free from faulty parts, manufacture, or workmanship.
- The warranty does not apply where damage is caused by other factors, e.g. mishandling, abuse, accident, or failure to follow operating instructions.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. Suppose this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on. In that case, the user is encouraged to try
to connect the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. Cygnett and the Cygnett
logo are trademarks of Cygnett Pty Ltd. Other brands and product names are
trademarks or registered trademarks of their respective holders.
© 2020 Cygnett PTY LTD.
Cygnett Head Office
858 Lorimer Street, Port Melbourne Victoria, 3207, Australia
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>