NITECORE CR7 LED Flashlight User Manual

NITECORE CR7 LED Flashlight

Features

•  Designed with the combination of the red and white beams
•  The white beam utilizes 4 x CREE XP-G3 S3 LEDs for a max output of 2,500 lumens
•  The red beam utilizes 4 x CREE XPE LEDs to provide a max output of 370 lumens
•  High efficiency constant circuit provides stable output up to 130 hours
•  Dual tail switches specially designed for tactical applications control 5 brightness levels of the white beam, 3 levels of the red beam and STROBE Mode
•  STROBE READYTM Technology to enable quick access to STROBE Mode (Patent No.: ZL201320545349.4)
•  STROBE Mode uses randomly changing frequencies for stronger dizzying effects
•  Tactical Mode and Daily Mode available for the white beam
•  The power indicator on the tail cap indicates the remaining battery power
•  The power indicator can also display the battery voltage (±0.1V)
•  Rigid double-layer tube design
•  Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
•  Electronic reverse polarity protection
•  Optical lenses with double-sided scratch-resistant coating
•  Constructed from aero grade aluminum alloy
•  HA III military grade hard-anodized finish
•  Rating in accordance with IP68 (2 meters submersible)
•  Impact-resistant to 1 meter

Specifications

• Length: 148.2mm (5.83”)
• Head Diameter: 40mm (1.57”)
• Tail Diameter: 26mm(1.02”)
• Weight: 158g (5.57oz)

Battery Options

(Recommended)
18650 Rechargeable Li-ion Battery (Output over 8A)| 18650| 3.6V/3.7V| Y (Compatible)
Primary Lithium Battery| CR123| 3V| Y (Compatible)
Rechargeable Li-ion Battery| RCR123| 3.6V/3.7V| Y (Compatible)
18650 Rechargeable Li-ion Battery (Output below 8A)| 18650| 3.6V/3.7V| N (Incompatible)

Technical Data

2,500

Lumens

| 1,100

Lumens

| 320

Lumens

| 90

Lumens

| 8

Lumens

| 2,500

Lumens

| 370

Lumens

| 200

Lumens

| 85

Lumens

*30min| 1h 45min| 4h 15min| 20h| 130h| ─| ─| ─| ─
279m| 190m| 102m| 54m| 14m| ─| 190m| 118m| 78m
19,500cd| 9,000cd| 2,600cd| 740cd| 51cd| ─| 9,150cd| 3,530cd| 1,520cd
1m (Impact Resistance)
IP68, 2m (Waterproof and Submersible)

**Battery Installation

**

As illustrated, after unscrewing the battery cap, insert/remove the battery(s) and screw to tighten the battery cap. Note : After the battery insertion, the power indicator beside the tail switches will flash to indicate the battery voltage. Please refer to the “Power Indication” section of this manual for more details.

1.  Ensure the battery(s) is/are inserted with the positive end towards the head. The product will not work if the battery(s) is/are incorrectly inserted.
2.  CAUTION! Possible dangerous radiation! Don’t look into the light! May be dangerous for your eyes.
3.  When the power level is low, please stop using the product and replace or recharge the battery to prevent damage to the battery.
4.  When the product is kept in a backpack or left unused for a prolonged time, please remove all batteries to prevent accidental activation or battery leakage.
5.  DO NOT submerge the light into any liquid when it is hot. Doing so may cause irreparable damage to the light due to the difference of air pressure inside and outside of the tube.

Beam Switching
The CR7 has an easy switching mechanism between the red and white beams. Push the head outwards and rotate the head clockwise or counterclockwise as illustrated to switch between the red and white beams.
Tactical Momentary Illumination
Half-press and hold the Power Button to turn on the light momentarily. Release to turn it off. Note: The CR7 has mode memory. When reactivated, the flashlight will automatically access the previous memorized level or mode.

Operating Instructions of the Red Beam

On / Off

• On : When the red beam is off, press the Power Button until a click sound is heard to access the memorized level of the red beam.
• Off : When the red beam is on, press the Power Button until a click sound is heard to turn it off.

Output Levels
When the red beam is on, short press the Mode Button to cycle through the following red output levels: LOW – MID – HIGH. Momentary Access to HIGH When the red beam is on, press and hold the Mode Button to access the HIGH level of the red beam. Release to return to the previous memorized red output level.

Operating Instructions of the White Beam

On / Off

• On : When the white beam is off, press the Power Button until a click sound is heard to access the memorized level of the white beam.
• Off : When the white beam is on, press the Power Button until a click sound is heard to turn it off.

User Mode Selection of the White Beam
The CR7 provides 2 user modes of the white beam for different users and situations. Daily Mode: When the light is on, press and hold the Mode Button to momentarily access the TURBO level of the white beam. Release to return to the previous memorized brightness level of the white beam. (Default Setting) Tactical Mode: When the light is on, long-press the Mode Button to directly access STROBE Mode. Short press the Mode Button again to return to the previous memorized brightness level of the white beam. To select the desired user mode:

1.  Ensure the light is turned off.
2.  Loosen the tail cap.
3.  Keep holding the Mode Button on the tail cap while simultaneously tightening the tail cap.
4.  Once the tail cap has been tightened, the LEDs will indicate a user mode selected by flashing once for Daily Mode and flashing twice for Tactical Mode.

**Power Indication

**

When the battery is inserted, the power indicator will flash to show the battery voltage (±0.1V). For example, when the battery voltage is at 4.2V, the power indicator will flash 4 times followed by a 1.5-second pause and 2 more flashes. Different voltages represent the corresponding remaining battery power levels:

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of a silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective/malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty will be nullified if:

1.  the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
2.  the product(s) is/are damaged due to improper use; (e.g. reversed polarity installation)
3.  the product(s) is/are damaged due to battery leakage.

For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com All images, text and statements specified herein this user manual are for reference purposes only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

References

• GmbH.de
• Nitecore Markenshop | Taschenlampen, Akkus und mehr | Nitecore

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>